Introduzzjoni
This manual provides detailed instructions for the setup, operation, and maintenance of your Kingdom V5 Wireless Microphone System. This professional system is designed for clear audio transmission in various environments, including churches, bands, and events. It features a robust receiver and four high-quality podium microphones, each with independent volume control and built-in condenser elements.
Kontenut tal-Pakkett
Iċċekkja li l-oġġetti kollha elenkati hawn taħt huma preżenti fil-pakkett tiegħek:
- 1x Kingdom V5 Wireless Receiver
- 4x Kingdom Podium Microphones
- 1x Adapter tal-Enerġija għar-Riċevitur
- 2x Antenni Riċevituri
- 1x 1/4" Audio Cable
- Manwal għall-Utent (dan id-dokument)
Prodott Overview
Komponenti tas-Sistema
Figure 1: Complete Kingdom V5 Wireless Microphone System, showing the main receiver unit and four individual podium microphones.
Podium Microphone Features
Figura 2: Dettaljat view of a single podium microphone, highlighting the LCD display for frequency, the power switch, and the battery compartment location.
- Display LCD: Shows current operating frequency and battery status.
- Swiċċ mixgħul/mitfi: Controls power to the microphone.
- Kompartiment tal-batterija: Located underneath, holds batteries for operation.
- Mikrofonu Gooseneck: Flexible design for optimal positioning.
Konnessjonijiet tal-Panew ta' wara tar-Riċevitur
Figura 3: Wara view of the receiver, illustrating the power cord input, mixed 1/4" TRS output, individual XLR channel outputs (Balanced A, B, C, D), and antenna connection points.
- Power Cord Input: Jikkonnettja mal-adapter tal-enerġija inkluż.
- Mixed 1/4" TRS Output: Provides a combined audio output for all channels.
- XLR Channel Outputs (Balanced A, B, C, D): Individual balanced audio outputs for each microphone channel.
- Antennae Locations: Connect the two included antennas for optimal wireless reception.
Setup Istruzzjonijiet
- Poġġiment tar-riċevitur: Position the receiver in a central location, away from large metal objects or other wireless devices that may cause interference. Ensure line-of-sight to the intended microphone usage area for optimal signal.
- Qabbad l-antenni: Screw the two included antennas firmly into the "Antennae Location" ports on the rear of the receiver. Adjust them vertically for best reception.
- Konnessjoni tal-Enerġija: Connect the power adapter to the "Power Cord Input" on the receiver's rear panel, then plug the adapter into a standard AC power outlet. Do not power on the receiver yet.
- Konnessjoni tal-Ħruġ Awdjo:
- For individual microphone outputs, connect XLR cables from the "XLR Channel Outputs" (Balanced A, B, C, D) to your mixer or PA system's input channels.
- For a combined output, connect a 1/4" TRS cable from the "Mixed 1/4" TRS Output" to a single input on your mixer or PA system.
- Microphone Battery Installation: Open the battery compartment on each podium microphone (typically underneath). Insert two fresh AA batteries, observing correct polarity. Close the compartment securely.
- Qawwa Mixgħul: First, power on your mixer or PA system. Then, power on the Kingdom V5 receiver using the front panel power switch. Finally, power on each podium microphone using its individual On/Off switch.
- Frequency Synchronization: The system should automatically synchronize frequencies. If a microphone does not connect, refer to the receiver's display and the microphone's LCD to ensure they are on the same channel. Manual frequency adjustment may be required in environments with high interference. Consult the full product manual for detailed frequency calibration procedures if automatic synchronization fails.
- Initial Sound Check: Speak into each microphone and adjust the individual volume controls on the receiver, as well as the input gain on your mixer/PA system, to achieve desired audio levels without distortion.
Istruzzjonijiet Operattivi
- Użu tal-mikrofonu: Position the podium microphone approximately 6-12 inches from the speaker's mouth for optimal sound pickup. The gooseneck design allows for flexible adjustment.
- Kontroll tal-Volum: Each microphone channel on the receiver has an independent volume knob. Adjust these to balance the audio levels of all active microphones.
- Monitoraġġ tal-Ħajja tal-Batterija: The microphone's LCD display indicates battery status. Replace batteries promptly when the low battery indicator appears to avoid unexpected signal loss.
- Medda bla fili: The system operates effectively within its specified range. Obstacles such as walls, large crowds, or other electronic devices can reduce the effective range. Maintain line-of-sight between microphones and the receiver whenever possible.
- Power Down Sequence: To prevent pops or damage to your sound system, always power off microphones first, then the receiver, and finally your mixer/PA system.
Manutenzjoni
- Tindif: Use a soft, dry cloth to clean the receiver and microphones. Avoid using liquid cleaners or solvents, which can damage the components.
- Sostituzzjoni tal-batterija: Regularly check and replace microphone batteries. Remove batteries if the microphones will not be used for an extended period to prevent leakage.
- Ħażna: Store the system in a cool, dry place, away from direct sunlight and extreme temperatures. When transporting, use appropriate padding to protect components.
- Kura tal-antenna: Handle antennas carefully. Ensure they are securely attached but do not overtighten.
Issolvi l-problemi
If you encounter issues with your Kingdom V5 Wireless Microphone System, refer to the table below for common problems and solutions.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-ebda ħoss mill-mikrofonu | Microphone off, low batteries, receiver off, incorrect cable connection, frequency mismatch. | Ensure microphone and receiver are powered on. Replace batteries. Check all audio cables. Verify microphone and receiver are on the same frequency channel. |
| Intermittent signal / Signal drops | Out of range, interference from other devices, weak batteries, antenna obstruction. | Move microphone closer to receiver. Check for sources of interference (Wi-Fi routers, other wireless systems). Replace microphone batteries. Ensure antennas are unobstructed and properly positioned. Consider manual frequency calibration if interference persists. |
| Kwalità tal-ħoss fqira / Distorsjoni | Input gain too high, microphone too close to sound source, interference. | Reduce receiver channel volume or mixer input gain. Maintain appropriate distance from microphone. Check for interference. |
| Ħsejjes ta’ daqq jew żanżin | Ground loop, faulty cable, electrical interference. | Ensure all equipment is plugged into the same power circuit. Try different cables. Check for nearby electrical devices causing interference. |
Speċifikazzjonijiet
| Brand | Saltna |
| Isem tal-Mudell | SYSV5P4_N |
| Numru ta 'Kanali | 4 |
| Fattur tal-Forma tal-Mikrofonu | Microphone System (4 Podium Microphones) |
| Mudell Polari | Unidirezzjonali |
| Teknoloġija tal-Konnettività | Bla fili, XLR |
| Tip ta' Konnettur | XLR (Receiver outputs) |
| Karatteristiċi Speċjali | Volume Control (per channel), Wireless Operation |
| Apparati Kompatibbli | PA System, Audio Mixers |
| Sors tal-Enerġija | Corded Electric (Receiver), Battery (Microphones) |
| Użi Rakkomandati | Singing, Speech, Live Events |
Garanzija u Appoġġ
For warranty information, technical support, or service inquiries, please refer to the official Kingdom webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta’ garanzija.
You can visit the Kingdom Store for more information: Kingdom Official Store
