TEEHO TE342 Smart Keyless Entry Door Lock User Manual

Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your TEEHO TE342 Fingerprint Smart Keyless Entry Door Lock. Please read this guide thoroughly before installation and use to ensure proper functionality and security. Keep this manual for future reference.

X'hemm fil-Kaxxa

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• Marki tas-swaba' Smart Lock tal-Bieb
• Pjanċa tal-Immuntar
• Viti (daqsijiet varji)
• Lukkett
• Strajk
• 2 Backup Keys
• Istruzzjonijiet Manwal
• Manwal għall-Utent

Setup u Installazzjoni

1. Iċċekkja l-Kompatibbiltà tal-Bieb

Before installation, ensure your door dimensions are compatible with the TE342 lock. Refer to the diagram below for required measurements.

Immaġni: Door compatibility measurements including door thickness (1-3/8" to 2"), backset (2-3/8" or 2-3/4"), door hole diameter (1-1/2" or 2-1/8"), and latch hole (1" deep).

• Ħxuna tal-Bieb: 1-3/8" to 2" (35mm to 50mm)
• Dahar lura: 2-3/8" jew 2-3/4" (60mm jew 70mm)
• Dijametru tat-Toqba tal-Bieb: 1-1/2" jew 2-1/8" (38mm jew 54mm)
• Latch Hole Depth: Minimum 1" (25mm)

2. Gwida bil-Vidjo għall-Installazzjoni

For a visual step-by-step guide, please watch the official installation video:

3. Step-by-Step Installation Overview

1. Installa l-lukkett: Insert the latch into the door edge. Adjust its length (60mm or 70mm backset) if necessary by rotating and pulling the mechanism. Secure it with the provided screws.
2. Installa l-Assemblea Esterna: Pass the cable and spindle through the door hole. Ensure the tailpiece is horizontal. If your door hole is 38mm (1-1/2"), remove the spacer from the exterior assembly before installation.
3. Sikura l-Pjanċa tal-Immuntar: Position the mounting plate on the interior side of the door, aligning it with the exterior assembly. Secure it using the mounting plate screws.
4. Qabbad l-Assemblea Interna: Connect the cable from the exterior assembly to the interior assembly. Ensure the thumb turn on the interior assembly is in a vertical position.
5. Installa l-Assemblea Intern: Attach the interior assembly to the mounting plate. Secure it with the interior assembly screws.
6. Daħħal Batteriji: Load 4 AA alkaline batteries into the battery compartment. Ensure correct polarity.
7. Irrisettja l-Lock: Press and hold the reset button for 5 seconds until you hear a 'BEEP'. The latch will rotate and extend automatically.

Istruzzjonijiet Operattivi

1. Metodi ta 'ftuħ

The TEEHO TE342 offers multiple convenient ways to unlock your door:

Immaġni: Multiple ways to access the TEEHO TE342 smart lock.

• APP Unlocking: Use the KK Home app on your smartphone to unlock the door remotely via Bluetooth.
• Nisfruttaw il-marki tas-swaba': Register up to 20 fingerprints for quick access. The lock features 0.3-second recognition time with AI self-learning technology.
• Password Entry: Set up to 20 unique passwords for family members or regular visitors.
• One-Time Passwords: Generate temporary, single-use passwords for visitors, which are automatically deleted after use.
• Ċwievet mekkaniċi: Two spare keys are provided for emergency manual unlocking.

2. Karatteristiċi ta' Kontroll tal-App

Manage your lock conveniently through the KK Home app:

Immaġni: App Control via Bluetooth for the TEEHO smart lock.

• Aċċess mill-bogħod: Grant permanent or temporary unlocking access to family members or remotely generate one-time passwords for visitors.
• Real-time Log Records: Track all lock and unlock activities in real-time, providing better control over your home security.
• Immaniġġja l-Utenti: Differentiate between family (full permissions) and guest (limited permissions) access.
• Offline Random Passcode: Generate a random password (valid for 30 minutes) anytime, anywhere, even without an internet connection.
• Password kontra l-Peeping: Enter random numbers before or after the correct password to protect your code from being exposed.

For a detailed guide on app operations, please watch the official app operation video:

3. Auto-Lock and One-Touch Locking

Enhance your security with automatic locking features:

Immaġni: Auto Lock & 2-Second Locking features.

• Auto Lock: The door lock automatically engages after a customizable delay of 10-99 seconds. This feature can be configured via the app.
• Qfil One-Touch: From the outside, simply press and hold any key on the keypad for 2 seconds to instantly lock the door.

Manutenzjoni

1. Sostituzzjoni tal-batterija

The lock requires 4 AA alkaline batteries. Replace all batteries at once with new ones when the low battery reminder is activated (typically below 20%). Avoid mixing different types of batteries.

Immaġni: Long Battery Life illustration, showing the battery compartment and a USB-C port for emergency power.

In case of complete battery drain, an emergency Type-C port is available on the exterior assembly for temporary power to unlock the door.

2. Kundizzjonijiet Ambjentali

The TEEHO TE342 is designed to withstand various weather conditions, with an IP54 rating for dust and water resistance. It operates effectively in temperatures ranging from -31°F to 151°F.

Immaġni: Works Well in All Weather, highlighting the lock's durability in extreme temperatures and its IP54 waterproof rating.

Issolvi l-problemi

1. Kwistjonijiet ta' Konnessjoni tal-Wi-Fi

If you encounter Wi-Fi connection issues during setup:

1. Irrisettja l-Lock: Żomm il-buttuna reset għal 5 sekondi.
2. Check Bluetooth & Wi-Fi: Ensure Bluetooth is enabled on your phone, your home Wi-Fi (2.4GHz only) is active, the router is functioning, and the lock is within 10 meters of the router.
3. Aġġorna l-App: Ensure your KK Home app is updated to the latest version.
4. Iċċekkja l-batterija: Confirm the lock's battery is over 20%.
5. Ivverifika l-Kejbils: Ensure connection cables are properly inserted.

2. Il-Batterija Tiskula Malajr

If your smart lock's batteries are draining quickly:

1. Check for Misalignment: Ensure the lock is correctly aligned and the hole depth of the door frame exceeds 25mm.
2. Inspect Connection Wires: Ensure connection wires are correctly installed to prevent power supply issues.
3. Verify Screw Installation: Check if the lock is securely installed using the provided screws.
4. Uża Batteriji Alkalini: Confirm you are using recommended 4 alkaline batteries. Replace all at once with new ones when needed.

3. Lock Not Working

If your smart lock is unresponsive:

1. Irrisettja l-Lock: Żomm il-buttuna reset għal 5 sekondi.
2. Iċċekkja l-Enerġija tal-Batterija: Ensure the lock's battery is over 20%.
3. Update App and Firmware: Make sure your smart lock's app and firmware are up to date.
4. Inspect Connection Wires: Ensure connection cables are properly inserted. Try to re-install the door lock.
5. Ibdel il-batteriji: Confirm you are using recommended 4 alkaline batteries.

If issues persist, kindly provide the following details via email or phone call for further assistance:

• ESN number
• User account name for the KK Home App
• A photo or video of the lock
• Phone model, system version
• KK Home App version

Speċifikazzjonijiet

Garanzija u Appoġġ

TEEHO offers a 30-day return and 1-year exchange service for this product. Additionally, lifetime after-sales service is provided to every customer.

• Appoġġ bit-Telefon Online: Available Monday to Friday, 9 AM to 5 PM EST.
• 24/7 After-Sales Email Service: For any inquiries or assistance.

Please refer to your product packaging or the official TEEHO webis-sit għall-aktar informazzjoni ta' kuntatt aġġornata.