Manwal tal-Utent tal-Cooler tas-CPU ZALMAN CNPS80G Rev.3

1. Introduzzjoni

The ZALMAN CNPS80G Rev.3 is a compact, low-noise top-flow air CPU cooler designed for efficient heat dissipation. Its small form factor and easy installation make it suitable for various PC builds. This manual provides essential information for proper installation, operation, and maintenance of your CPU cooler.

2. Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-komponenti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:

• ZALMAN CNPS80G Rev.3 CPU Cooler
• Manwal ta' Istruzzjoni
• Intel Base Unit & Push Pin Set
• Thermal Grease (ZM-STG2M)

Image: The ZALMAN CNPS80G Rev.3 CPU Cooler, showing the fan and heatsink assembly.

3. Speċifikazzjonijiet

Image: Dimensional drawing of the ZALMAN CNPS80G Rev.3 CPU Cooler.

4. Informazzjoni dwar is-Sigurtà

• Ensure your computer is powered off and unplugged from the wall outlet before installation or maintenance.
• Handle the CPU cooler and other components with care to avoid damage.
• Żomm partijiet żgħar 'il bogħod mit-tfal.
• Refer to your motherboard manual for specific CPU and cooler installation guidelines.

5. Setup u Installazzjoni

The ZALMAN CNPS80G Rev.3 utilizes a clip-type installation method for both Intel and AMD platforms. Follow these general steps for installation:

5.1. Ipprepara s-CPU u l-Motherboard

1. Ensure your CPU is correctly seated in its socket on the motherboard.
2. Clean the surface of the CPU's Integrated Heat Spreader (IHS) with isopropyl alcohol to remove any dust or residue.
3. Apply a small amount of the included thermal grease (ZM-STG2M) to the center of the CPU's IHS. Use a spreader or a thin, non-conductive object to spread it evenly into a thin layer across the entire surface.

Immaġni: Angolata view of the ZALMAN CNPS80G Rev.3 CPU Cooler, highlighting the heatsink fins.

5.2. Attach Mounting Brackets (Intel Sockets)

For Intel LGA1700/1200/115x sockets, attach the provided Intel base unit and push-pin set to the cooler base. The base unit is designed to align with the cooler's pre-drilled holes. Secure it with the small screws provided.

Immaġni: Ġenb view of the ZALMAN CNPS80G Rev.3 CPU Cooler, showing the heat pipes and base.

5.3. Install the Cooler

1. Carefully remove the protective film from the cooler's base.
2. Align the cooler's mounting pins with the holes around the CPU socket on the motherboard.
3. For Intel sockets, gently push down on each of the four push-pins until they click into place, securing the cooler to the motherboard. Ensure even pressure is applied.
4. For AMD sockets (AM5/AM4/AM3+/AM3), the cooler uses the existing motherboard backplate and retention clips. Hook one side of the cooler's clip onto the motherboard's retention bracket, then apply firm, even pressure to the opposite side until it clips securely into place.
5. Connect the cooler's 4-pin fan cable to the CPU_FAN header on your motherboard. Refer to your motherboard manual for the exact location of this header.

Image: The ZALMAN CNPS80G Rev.3 CPU Cooler, showing the 4-pin PWM fan connector.

6. Operazzjoni

The ZALMAN CNPS80G Rev.3 features an 85mm PWM fan. PWM (Pulse Width Modulation) allows your motherboard to dynamically control the fan speed based on CPU temperature. This ensures optimal cooling performance when needed and quieter operation during lighter loads.

The top-flow design directs airflow downwards, not only cooling the CPU but also providing some airflow to surrounding motherboard components like the VRMs and RAM, contributing to overall system stability.

Image: Diagram illustrating the top-flow airflow pattern of the CPU cooler.

7. Manutenzjoni

Manutenzjoni regolari tgħin biex tiżgura prestazzjoni ottimali u lonġevità tas-CPU cooler tiegħek:

• Tindif tat-Trab: Periodically clean the heatsink fins and fan blades to prevent dust buildup, which can impede airflow and reduce cooling efficiency. Use compressed air or a soft brush.
• Pejst Termali: If you remove the cooler for any reason, it is recommended to clean off the old thermal paste from both the CPU and the cooler base and apply a fresh layer before reinstallation.

8 Issolvi l-problemi

If you encounter issues with your ZALMAN CNPS80G Rev.3 CPU Cooler, consider the following:

• Il-Fann Mhux Idur:
  • Check if the 4-pin fan connector is securely plugged into the CPU_FAN header on the motherboard.
  • Verify that the fan is not obstructed by cables or other components.
  • Access your motherboard's BIOS/UEFI settings to ensure the CPU fan control is enabled and configured correctly.
• Temperaturi Għolja tas-CPU:
  • Ensure the cooler is securely mounted to the CPU, with even pressure applied.
  • Ikkonferma li l-pejst termali ġie applikat b'mod korrett u uniformi.
  • Iċċekkja jekk hemmx akkumulazzjoni eċċessiva ta' trab fuq ix-xewk tas-sink tas-sħana u x-xfafar tal-fann, u naddaf jekk meħtieġ.
  • Verify proper airflow within your PC case.
• Storbju Eċċessiv:
  • Check for any loose cables or objects that might be touching the fan blades.
  • Ensure the fan is securely attached to the heatsink.
  • Adjust fan speed settings in your motherboard's BIOS/UEFI or through software if temperatures allow for lower RPMs.

9. Garanzija u Appoġġ

This ZALMAN product (Model FN1961) is covered by a garanzija ta 'sena from the date of purchase through authorized dealers in Japan. Please retain your proof of purchase for warranty claims.

For technical support or further assistance, please contact your local ZALMAN authorized dealer or visit the official ZALMAN websit.