Silonn Commercial Ice Maker SLIM12T Instruction Manual

Introduzzjoni

This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your Silonn Commercial Ice Maker, model SLIM12T. Please read this manual thoroughly before using the appliance and retain it for future reference.

The Silonn SLIM12T is designed to produce up to 150 lbs of ice per day with a 33 lbs storage capacity, suitable for various commercial and home settings.

Image: Silonn Commercial Ice Maker SLIM12T, showcasing its stainless steel exterior and the included accessories: an ice scoop, drain hose, water quick connector, and water hose.

Image: A visual representation of the Silonn ice maker's versatility, showing its application in diverse environments such as coffee shops, food trucks, bars, and outdoor entertaining areas.

Karatteristiċi Ewlenin

The Silonn SLIM12T Commercial Ice Maker incorporates advanced design and technology for efficient and reliable ice production:

• Kapaċità Għolja: Produces up to 150 lbs of ice in 24 hours with a 33 lbs storage bin.
• Produzzjoni ta' Silġ Mgħaġġla: Ice ready in 8-15 minutes per cycle.
• Ħxuna tas-Silġ Aġġustabbli: Customize ice cubes to thin, medium, or thick.
• Tindif Awtomatiku: Jissimplifika l-manutenzjoni u jiżgura l-iġjene.
• Dual Water Supply Options: Manual fill or direct connection to a water source.
• Intuitive LCD Control Panel: Easy operation with timer and light functions.
• Kostruzzjoni Durabbli: Magħmul bl-azzar inossidabbli għal lonġevità.

Image: An illustration detailing the four key system upgrades that contribute to the ice maker's efficient ice production and fast cooling, including air cooling, a high-efficiency compressor, multi-fan cooling, and a thickened insulation layer.

Informazzjoni Importanti dwar is-Sigurtà

Biex tnaqqas ir-riskju ta’ nar, xokk elettriku, jew korriment meta tuża l-magna tas-silġ tiegħek, segwi dawn il-prekawzjonijiet bażiċi:

• Aqra l-istruzzjonijiet kollha qabel l-użu.
• Qabbad ma' żbokk ertjat biss.
• Do not immerse the power cord, plug, or the appliance in water or other liquids.
• Issorvelja lit-tfal meta l-apparat ikun qed jintuża.
• Toperax b'korda jew plagg bil-ħsara.
• Tużax barra.
• Żgura ventilazzjoni xierqa madwar l-unità.
• Uża biss ilma tajjeb għax-xorb.
• Spluggja qabel it-tindif jew is-servizz.

Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha huma preżenti fl-imballaġġ:

• Silonn Commercial Ice Maker (SLIM12T)
• Scoop tas-Silġ
• Pajp tad-Drenaġġ (6.6 pied)
• Water Quick Connector
• Water Hose (9.1 ft)
• Manwal ta 'Istruzzjoni (dan id-dokument)

Setup u Installazzjoni

1 Tqegħid

• Poġġi l-magna tas-silġ fuq wiċċ ċatt u stabbli.
• Ensure adequate clearance (at least 5 inches) around the unit for proper ventilation.
• Evita dawl tax-xemx dirett jew sorsi tas-sħana.
• It-temperatura ambjentali għandha tkun bejn 10°C (50°F) u 32°C (90°F).

2. Konnessjoni tal-Provvista tal-Ilma

The SLIM12T offers two water supply options:

1. Manual Water Addition: Open the top lid and pour potable water directly into the water reservoir. The unit will alert you when water runs low.
2. Konnessjoni Diretta tal-Ilma: For continuous operation, connect the ice maker to a potable water source.
   • Locate the water inlet port at the back of the unit.
   • Attach the provided water hose to the water quick connector, then connect it to your water supply.
   • Kun żgur li l-konnessjonijiet kollha huma sikuri biex tevita t-tnixxijiet.

3. Konnessjoni tal-Pajp tad-Drenaġġ

Connect the provided drain hose to the drain outlet at the back of the unit. Route the drain hose to a suitable drain point, ensuring it has a continuous downward slope for proper water drainage.

Immaġni: Dettaljata view of the rear panel connections, illustrating the tap water inlet hose, power cord, and water drain hose. An installation guide for hose connections is also shown.

4. Tindif Inizjali

Before first use, it is recommended to clean the ice maker. Refer to the "Maintenance" section for detailed cleaning instructions, including how to use the self-cleaning function.

Istruzzjonijiet Operattivi

Control Panel Matulview

Image: Close-up of the Silonn ice maker's advanced LCD control panel, detailing the functions of the LIGHT, TIMER, ON/OFF (with CLEAN function), and +/- buttons for adjusting settings.

• DAWL: Press to turn the internal blue light on or off.
• TIMER: Quickly press to enter the reservation time setting mode.
• ON/OFF: Agħfas biex tixgħel jew titfi l-unità.
• NADIF: Hold the ON/OFF button for 5 seconds to activate the self-cleaning function.
• +/-: Use these buttons to adjust the ice making process duration and time settings (e.g., ice thickness, timer).

Proċess tal-Għamla tas-Silġ

1. Ensure the water supply is connected or the reservoir is filled.
2. Agħfas il- ON/OFF button to start the ice making cycle.
3. Adjust ice thickness (thin, medium, or thick) using the +/- buttons if desired. The ice making cycle typically takes 8-15 minutes.
4. The unit will automatically produce ice until the ice bin is full or the water level is low.
5. An alarm will sound if the water runs out, prompting a refill.

Image: Illustration demonstrating the adjustable ice thickness settings (Thin, Medium, Thick) and their corresponding production times, allowing customization for various beverage types.

Image: Infographic highlighting the Silonn ice maker's daily production capacity, indicating it can produce over 7000 ice cubes, sufficient for more than 800 drinks per day.

Funzjoni Timer

The timer function allows you to set a reservation time for the ice maker to start or stop.

1. Agħfas il- TIMER buttuna.
2. Uża l- +/- buttons to set the desired delay time (e.g., 8 hours, 10 hours).
3. The unit will automatically begin or end operation after the set time.

Image: Visual representation of the 24-hour time reservation feature, demonstrating how users can schedule ice production for specific times during the day or night.

Manutenzjoni

Funzjoni ta 'Awto-Tindif

The ice maker is equipped with an automatic self-cleaning function to simplify maintenance.

1. Ensure the unit is connected to a water supply or the reservoir is filled.
2. Żomm il- ON/OFF button for 5 seconds. The unit will enter self-cleaning mode.
3. The cleaning cycle will run automatically. Once complete, drain any remaining water.

Tindif regolari

• Barra: Imsaħ il-barra b'artab, damp drapp. Tużax tindif jew solventi li joborxu.
• Bin tas-Silġ: Periodically remove the ice bin and wash it with mild soap and water. Rinse thoroughly and dry before replacing.
• Ġibjun tal-Ilma: If using manual fill, regularly clean the water reservoir to prevent mineral buildup.
• Drenaġġ: Ensure the drain hose is clear and free of obstructions.

For optimal performance and hygiene, perform regular cleaning and utilize the self-cleaning function as needed.

Issolvi l-problemi

Qabel ma tikkuntattja l-appoġġ għall-klijenti, jekk jogħġbok irreferi għall-kwistjonijiet u s-soluzzjonijiet komuni li ġejjin:

Speċifikazzjonijiet

Image: Diagram illustrating the physical dimensions (Width, Depth, Height) and weight of the Silonn ice maker, along with a visual list of included accessories.

Garanzija u Appoġġ għall-Klijent

Silonn provides excellent customer care. For warranty information, product support, or assistance with setup and operation, please contact our U.S.-based customer care team. Refer to your purchase documentation or the Silonn webis-sit għal dettalji ta' kuntatt speċifiċi.

Please have your model number (SLIM12T) and purchase date available when contacting support.