1. Informazzjoni dwar is-Sigurtà
TWISSIJA: This product can expose you to chemical Di(2-ethylhexyl)phthalate (DEHP) and Lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture.
Always ensure all components are securely fastened before use. Do not stand on the chair. Do not use the chair if any parts are damaged or missing.
2. Setup u Assemblea
Minimal assembly is required for your Yaheetech Armless Desk Chair. Typically, this involves attaching the casters to the base and securing the seat and backrest components.
2.1 Żpakkjar u Kontroll tal-Komponenti
Carefully unpack all components from the box. Verify that all parts listed in the packaging contents are present and undamaged.
2.2 Important Pre-Assembly Step: Remove Plastic Cap
Before assembling, locate the pneumatic cylinder (gas lift). There is a black plastic cap on the top of the cylinder that għandhom jitneħħew prior to installation. Failure to remove this cap will prevent the chair's height adjustment mechanism from functioning correctly.
Figure 2.2.1: Removing the protective plastic cap from the pneumatic cylinder.
2.3 Passi tal-Assemblea
Follow the visual guide below for step-by-step assembly. The process typically takes around 15 minutes.
Figure 2.3.1: Visual guide for chair assembly.
Video 2.3.1: Detailed instructions on how to install the Modern Tufted Office Chair.
Video 2.3.2: Important reminder to remove the black plastic cap before assembly.
3. Istruzzjonijiet Operattivi
Your Yaheetech Armless Desk Chair is designed for comfort and flexibility in various settings.
3.1 Adjustable Seat Height
The chair features an adjustable seat height with a range of 4 inches. To adjust the height, locate the lever under the seat. Pull the lever upwards while seated to lower the chair, or pull the lever upwards while standing to raise the chair. Release the lever to lock the height in place.
3.2 Rocking Function and Back Tilt
The chair offers a rocking function and an adjustable back tilt angle (90°-110°). To enable the rocking function, pull out the lever located under the seat. To lock the backrest in an upright position, push the lever inwards. The tension of the rocking function can be adjusted by turning the round knob under the seat.
Figure 3.2.1: Adjustable back tilt and control mechanisms.
3.3 360° Swivel and Rolling Wheels
The chair is equipped with a 360° swivel function, allowing for easy rotation. The five polypropylene casters ensure smooth and effortless movement across hard floor surfaces, providing flexibility to move around your workspace.
Video 3.3.1: Demonstration of the Yaheetech Modern Faux Leather Office Chair's features, including swivel and height adjustment.
4. Manutenzjoni u Kura
Kura xierqa se testendi l-ħajja u d-dehra tas-siġġu tiegħek.
4.1 Istruzzjonijiet għat-Tindif
The chair's faux leather upholstery is water-resistant and easy to maintain. For general cleaning, simply wipe clean with a damp drapp. Evita li tuża kimiċi ħarxa jew prodotti tat-tindif li joborxu, għax dawn jistgħu jagħmlu ħsara lill-materjal.
Figure 4.1.1: Cleaning the water-resistant faux leather.
4.2 Manutenzjoni Ġenerali
Regularly check all screws and bolts to ensure they are tight. Re-tighten if necessary. Inspect the casters periodically for any debris that might hinder smooth rolling and clean as needed.
5 Issolvi l-problemi
Jekk tiltaqa' ma' xi problemi bis-siġġu tiegħek, jekk jogħġbok irreferi għas-soluzzjonijiet komuni li ġejjin:
- L-Aġġustament tal-Għoli Mhux Jaħdem: Ensure the black plastic cap on the pneumatic cylinder was removed during assembly. If not, disassemble the chair, remove the cap, and reassemble.
- Chair Does Not Roll Smoothly: Check the casters for any hair, dust, or debris that may be obstructing their movement. Clean the casters thoroughly. Ensure the chair is used on a suitable surface (recommended for hard floors).
- Is-Siġġu Jħoss Instabbli: Verify that all screws and bolts are securely tightened. Ensure the chair is placed on a flat, even surface.
6. Speċifikazzjonijiet
Below are the key specifications for your Yaheetech Armless Desk Chair (Model: YT-001274051):
Figure 6.1.1: Chair dimensions.
| Karatteristika | Dettall |
|---|---|
| Brand | Yaheetech |
| Isem tal-Mudell | YT-001274051 |
| Kulur | Abjad |
| Materjal | Faux Leather, Foam (Fill Material) |
| Dimensjonijiet tal-Prodott | 24.5"D x 21.5"W x 37"H |
| Daqs | 21.5” W × 24.5” D × (33-37)” H |
| Lura Stil | Dahar Solidu |
| Karatteristiċi Speċjali | Adjustable Height, Ergonomic, Space Saving |
| Rakkomandazzjoni tal-Piż Massimu | 300 Liri |
| Stil | Bla driegħ |
| Stil tad-driegħ | Bla driegħ |
| Rakkomandazzjoni tal-wiċċ | Art iebes |
| Moviment Bażi Għamara | Dawwar |
| Inklinazzjoni | Iva |
| Piż tal-oġġett | 19.62 liri |
7. Garanzija u Appoġġ
For warranty information or customer support regarding your Yaheetech Armless Desk Chair, please refer to the documentation included with your purchase or visit the official Yaheetech website. You may also contact Yaheetech customer service directly for assistance with product inquiries, parts, or service.
