Introduzzjoni
This manual provides essential instructions for the safe and effective use of your Holy Stone HSRID01 Remote ID Transmitter. Please read this manual thoroughly before operation and retain it for future reference. This device is designed to comply with drone registration regulations, transmitting necessary identification data during flight.
Prodott Overview
Karatteristiċi ewlenin:
- Compliant with Unmanned Aircraft Registration System and Ministry of Land, Infrastructure, Transport and Tourism regulations.
- Technical Conformity Certified (Radio Law).
- Lightweight and Compact: Weighs 13.9g (without Velcro) / 14.3g (with Velcro).
- Dimensjonijiet: 39 x 30 x 13mm.
- Built-in battery with approximately 5 hours of operating time.
- Port tal-iċċarġjar tat-Tip-C.
- Compatible with Holy Stone drones (HS175, HS175D, HS280D, HS900, HS290, HS700E, HS720E, HS700D, HS720, HS166, D60) and other drones weighing over 100g.
Kontenut tal-Pakkett:
- External Remote ID Transmitter x 1
- Ċinga tal-velkro x 1
- Japanese Instruction Manual x 1 (Note: Charging cable is not included. Please use a commercially available Type-C cable.)
Image: Holy Stone HSRID01 Remote ID Transmitter front view, showing the power button and two indicator lights.
Image: Holy Stone HSRID01 Remote ID Transmitter from the side, highlighting the Type-C charging port and battery indicator.
Image: Holy Stone HSRID01 Remote ID Transmitter held in a hand, demonstrating its compact dimensions (3.9cm x 3.0cm x 1.3cm) and light weight of 13.9g.
Setup
Iċċarġjar tal-Apparat:
The HSRID01 has a built-in battery. Before first use, fully charge the device.
- Connect a commercially available Type-C USB cable (not included) to the charging port on the device.
- Qabbad it-tarf l-ieħor tal-kejbil ma' sors ta' enerġija USB (eż., kompjuter, adapter tal-ħajt USB).
- The indicator lights will show charging status. A full charge provides approximately 5 hours of operation.
Initial Power On/Off:
- To power on, press and hold the power button for 2 seconds. The power indicator light will illuminate.
- To power off, press and hold the power button for 2 seconds. The power indicator light will turn off.
Installazzjoni
Mounting the Remote ID Transmitter:
The HSRID01 is designed for external mounting on drones. Use the provided Velcro strap for secure attachment.
- Attach one side of the Velcro to the Remote ID transmitter.
- Attach the other side of the Velcro to a suitable flat surface on your drone.
- Securely fix the Remote ID transmitter to the drone using the Velcro.
Recommended Mounting Location:
To ensure optimal GPS signal reception and avoid interference, choose a mounting location that:
- Is away from propellers to prevent interference.
- Does not cover or obstruct electronic components.
- Allows the power button and LED indicators to be visible and accessible.
Image: A visual guide demonstrating three steps to attach the Remote ID transmitter to a drone using Velcro straps.
Image: A white drone flying over a river and forest, with the Holy Stone HSRID01 Remote ID Transmitter clearly mounted on its top surface.
Operazzjoni
Remote ID Registration Process (DIPS):
This device requires registration with the DIPS (Drone Information Platform System) in Japan. Follow these steps for registration and data writing:
- Ippermetti l-Bluetooth fuq l-ismartphone tiegħek: Ensure your smartphone's Bluetooth setting is ON before proceeding with data writing.
- Power on the Remote ID: Press and hold the power button for 2 seconds. The power indicator will flash slowly. After a few seconds, it will enter data writing mode, and the status indicator will change to a green flashing light.
- Log in to DIPS: Access the drone registration system (DIPS) and log in. From the home screen, select the "Remote ID Writing" button.
- Select Aircraft: From the aircraft list, select the "Owned Aircraft Details" button for the drone you wish to write data to.
- Initiate Writing: Select the "Remote ID Write" button to begin the data writing process.
- Complete Writing: After the writing is complete, press and hold the power button to turn off the Remote ID.
Image: A smartphone screen showing Bluetooth settings, indicating that Bluetooth should be enabled.
Image: A diagram illustrating pressing the power button on the Remote ID transmitter for 2 seconds to power it on and activate data writing mode.
Image: A screenshot of the DIPS home screen, with an arrow pointing to the "Remote ID Writing" option.
Image: A screenshot of the DIPS aircraft list, showing a specific drone selected and the "Owned Aircraft Details" button highlighted.
Image: A screenshot of the DIPS aircraft details page, with an arrow pointing to the "Remote ID Write" button.
Image: A diagram showing the completion message for data writing and the action to power off the Remote ID transmitter.
Important Note for DIPS Registration:
When registering with DIPS, please select "Xiamen Huoshiquan Import & Export CO., LTD" as the "Remote ID Device Manufacturer Name."
Transmission Information:
The Remote ID transmitter broadcasts the following information:
- Registration Mark
- Remote ID Manufacturer Serial Number
- Tip ta' Inġenju tal-Ajru
- Latitudni
- Lonġitudni
- Veloċità
- Veloċità Vertikali
- Trajectory Direction
- Timestamp
Kompatibilità
The Holy Stone HSRID01 Remote ID Transmitter is compatible with a wide range of drones weighing over 100g. This includes, but is not limited to, the following Holy Stone drone models:
- HS175
- HS175D
- HS280D
- HS900
- HS290
- HS700E
- HS720E
- HS700D
- HS720
- HS166
- D60
Image: The Holy Stone HSRID01 Remote ID Transmitter displayed alongside several different drone models, indicating its wide compatibility with drones over 100g.
Speċifikazzjonijiet
| Attribut | Dettall |
|---|---|
| Numru tal-Mudell | HSRID01 |
| Dimensjonijiet (LxWxH) | 39 x 30 x 13 mm |
| Piż | 13.9g (without Velcro), 14.3g (with Velcro) |
| Ħajja tal-batterija | Madwar sagħtejn |
| Port tal-Iċċarġjar | USB tat-tip C |
| Konnettività | USB (for charging), Bluetooth (for data writing) |
| Konformità | Japanese Ministry of Land, Infrastructure, Transport and Tourism, Technical Conformity Certified |
| Referenza tal-Manifattur | HSRID01 |
Issolvi l-problemi
Kwistjonijiet Komuni u Soluzzjonijiet:
- Apparat mhux mixgħul: Ensure the battery is charged. Connect to a Type-C charger and check if the indicator lights respond.
- Unable to connect via Bluetooth for data writing:
- Kun żgur li l-Bluetooth huwa attivat fuq l-ismartphone tiegħek.
- Make sure the Remote ID transmitter is in data writing mode (green flashing light).
- Restart both the smartphone and the Remote ID transmitter.
- Serial number label fading: The serial number label on the device may fade over time. It is recommended to record the serial number in a safe place or within the DIPS registration system for future reference.
- Charging with USB-C to USB-C cable not working: Some USB-C to USB-C cables with Power Delivery (PD) functionality may not be compatible. Use a USB-A to USB-C cable for charging if you encounter issues.
Manutenzjoni
- Tindif: Uża drapp artab u niexef biex tnaddaf l-apparat. Tużax prodotti tat-tindif likwidi jew solventi.
- Ħażna: Aħżen l-apparat f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
- Protezzjoni tal-Port: The USB-C port does not have a cover. To prevent dust or moisture ingress, especially during outdoor use, consider using a protective cap or tape over the port when not charging.
Garanzija u Appoġġ
For warranty information and technical support, please refer to the official Holy Stone webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
Manufacturer Name for DIPS Registration: Xiamen Huoshiquan Import & Export CO., LTD
