Prodott Overview
Sodium bicarbonate, commonly known as baking soda, has the chemical formula NaHCO3. It is a white crystalline powder with a slightly alkaline taste and is commonly used in various applications, including as a leavening agent in baking, as an antacid to relieve heartburn, and as a laboratory reagent. "L.R." stands for Laboratory Reagent, indicating that the grade of this sodium bicarbonate is suitable for laboratory use. L.R. grade chemicals are of higher purity compared to technical-grade chemicals and are commonly used in analytical and research laboratories.
Applikazzjonijiet Ewlenin
- In medical applications: Sodium bicarbonate is used as an antacid to neutralize stomach acid and relieve heartburn or indigestion.
- In pH adjustments: It is used to adjust the pH of solutions in laboratory experiments.
- In laboratory analyses: Sodium bicarbonate is used as a reagent in various chemical tests and analytical procedures.
- Użu ġenerali: Sodium bicarbonate, commonly known as baking soda, is used in baking, as an antacid, and for various household cleaning purposes.
Stampi tal-Prodott
Image showing the front label of the NICE Sodium Bicarbonate L.R. bottle, indicating "LABORATORY REAGENT" and chemical formula NaHCO3.
Image displaying the side of the bottle, detailing purity specifications such as Assay, Chloride, Sulphate, Iron, Arsenic, Lead, and Calcium content.
Image showing the side of the bottle with manufacturer details, customer care email, and a QR code.
Official specification sheet for Sodium Bicarbonate 99%, detailing chemical purity parameters.
Setup u Preparazzjoni
This section outlines the necessary steps to prepare the Sodium Bicarbonate L.R. for laboratory use, ensuring safety and product integrity.
Linji Gwida tal-Ħżin
- Aħżen f'post frisk u niexef, 'il bogħod mix-xemx diretta u l-umdità.
- Keep container tightly closed to prevent absorption of atmospheric carbon dioxide and moisture, which can affect purity.
- Avoid storage near strong acids or oxidizing agents to prevent unintended reactions.
Prekawzjonijiet għall-Immaniġġjar
- Wear appropriate personal protective equipment (PPE), including safety glasses, a lab coat, and chemical-resistant gloves, when handling the product.
- Avoid inhalation of dust. Use in a well-ventilated area or under a fume hood to minimize exposure.
- In case of contact with skin or eyes, rinse immediately with plenty of water for at least 15 minutes. Seek medical attention if irritation persists.
- Do not ingest. If swallowed, rinse mouth with water and seek medical advice.
Istruzzjonijiet Operattivi
Sodium Bicarbonate L.R. (Laboratory Reagent) grade is suitable for various analytical and research applications requiring high purity. Always refer to specific experimental protocols for precise usage and concentration requirements.
General Laboratory Applications
- pH Adjustment: To adjust the pH of acidic solutions, add small amounts of sodium bicarbonate while continuously monitoring the pH with a calibrated pH meter. Stir thoroughly after each addition.
- Preparazzjoni tal-Buffer: Sodium bicarbonate can be used to prepare bicarbonate buffer solutions, which are crucial for maintaining stable pH in biological and chemical systems. Consult standard laboratory manuals or specific protocols for accurate buffer recipes and concentrations.
- Reagent in Chemical Tests: Utilize as specified in the protocol for various qualitative and quantitative chemical analyses, including titrations and precipitation reactions.
Dissolving Instructions for Solution Preparation
- To prepare an aqueous solution, slowly add the desired amount of sodium bicarbonate powder to a measured volume of distilled or deionized water while stirring continuously.
- Ensure complete dissolution before using the solution. Gentle heating (e.g., in a warm water bath) may accelerate dissolution for higher concentrations, but is generally not required for typical laboratory concentrations.
- Store prepared solutions in tightly sealed containers to prevent CO2 absorption from the air, which can alter pH.
Manutenzjoni u Rimi
Container Maintenance
- After each use, ensure the container lid is securely fastened to prevent contamination, moisture absorption, and degradation of the product.
- Keep the exterior of the container clean and free from spills to maintain laboratory hygiene and prevent cross-contamination.
- Regularly inspect the container for any damage or signs of degradation.
Linji Gwida dwar ir-Rimi
Dispose of unused or expired sodium bicarbonate and its solutions according to local environmental regulations and your laboratory's specific chemical waste disposal protocols. Sodium bicarbonate is generally considered low hazard, but specific disposal methods may vary based on local guidelines and any contaminants it may have come into contact with during use.
- Small Quantities: For small quantities of pure sodium bicarbonate or its dilute aqueous solutions, it can often be diluted further with water and flushed down the drain, provided local municipal wastewater regulations permit this.
- Larger Quantities or Contaminated Material: For larger quantities, or if the sodium bicarbonate has been contaminated with other hazardous substances, it must be treated as chemical waste. Consult with your institution's chemical waste management department or a licensed waste disposal contractor for proper disposal procedures.
- Ippakkjar: Empty containers should be rinsed thoroughly and disposed of according to local recycling or waste disposal guidelines.
Issolvi l-problemi
This section addresses common issues that may arise during the handling or use of NICE Sodium Bicarbonate L.R. and provides potential solutions.
- Issue: Product appears clumpy, hardened, or has formed solid lumps.
- Kawża Possibbli: Exposure to moisture or high humidity, leading to caking.
- Soluzzjoni: If the caking is minor, the material may still be usable after breaking up the lumps, provided its purity is not critical for the application. For sensitive applications or significant caking, the purity might be compromised, and it is advisable to use a fresh, uncompromised batch. Ensure the container is always tightly sealed after use and stored in a dry environment.
- Issue: Prepared solution pH is not as expected or unstable.
- Kawża Possibbli: Incorrect weighing of the chemical, incomplete dissolution, contamination of glassware or water, or absorption of atmospheric CO2 by the solution.
- Soluzzjoni: Ensure accurate weighing of sodium bicarbonate. Stir thoroughly to ensure complete dissolution. Use high-purity distilled or deionized water and clean, calibrated glassware. Store prepared solutions in tightly sealed containers to minimize CO2 absorption from the air, which can lower the pH.
- Issue: Product shows signs of discoloration or foreign particles.
- Kawża Possibbli: Contamination during handling or storage, or degradation due to improper storage conditions.
- Soluzzjoni: Do not use contaminated product for laboratory applications. Dispose of the contaminated material properly and use a fresh, uncontaminated batch. Review handling and storage procedures to prevent future contamination.
Speċifikazzjonijiet
Detailed specifications for NICE Sodium Bicarbonate L.R.-500 Gm (S11929), ensuring its suitability for laboratory and scientific applications.
Speċifikazzjonijiet Ġenerali tal-Prodott
| Attribut | Valur |
|---|---|
| Brand | SBIEB |
| Manifattur | NICE CHEMICALS |
| Numru tal-Mudell | chemical_45 |
| Piż tal-oġġett | 500 g |
| Kwantità netta | 500.00 Gramm |
| Dimensjonijiet tal-Pakkett | 14.5 x 14.5 x 6.5 ċm |
| Formola tal-Oġġett | Trab |
| Informazzjoni dwar il-Pakkett | Bag (referring to the container type) |
| ASIN | B0CDWK5FK1 |
| Data L-Ewwel Disponibbli | 26 ta’ Lulju 2023 |
Chemical Purity Specifications (L.R. Grade)
As per the manufacturer's specification sheet (visible in product image), the purity specifications for Sodium Bicarbonate 99% are:
| Parametru | Speċifikazzjoni |
|---|---|
| Assaġġ | 99% min |
| Klorur (Cl) | 0.01% max |
| Sulphate (SO4) | 0.02% max |
| Ħadid (Fe) | 0.001% max |
| Arseniku (As) | 0.0001% max |
| Ċomb (Pb) | 0.0005% max |
| Kalċju (Ca) | 0.01% max |
Garanzija u Appoġġ
For product inquiries, technical support, or information regarding product quality and warranty, please contact NICE CHEMICALS directly using the details below.
- Manifattur: NICE CHEMICALS (P) LTD.
- Email tal-Klijent tal-Kura: qc@nicechemicals.com (As per product packaging)
- Telefon: 0464 - 2788727 (As per product packaging)
- Indirizz: Manimala Road, Edappally, Kochi-682024, Kerala, India.
- For the most current contact details and official information, please refer to the product packaging or the official NICE CHEMICALS websit.
