Miffy Automatic Hand Soap Dispenser User Manual

Introduzzjoni

This manual provides essential information for the safe and efficient operation of your Miffy Automatic Hand Soap Dispenser. Please read this manual thoroughly before using the product and retain it for future reference.

The Miffy Automatic Hand Soap Dispenser is designed for convenient and hygienic hand washing, featuring a touchless operation and a charming Miffy design.

Informazzjoni dwar is-Sigurtà

• Do not immerse the entire unit in water. The unit is IPX5 waterproof, meaning it is protected against low-pressure water jets from any direction, but not full submersion.
• Żomm fejn ma jintlaħaqx mit-tfal sakemm ma jkunx taħt is-superviżjoni ta' adult.
• Use only recommended soap types. Avoid detergents with solid particles, as they may clog the dispenser.
• Ensure the USB charging port is dry and properly sealed with the rubber plug before exposure to water.
• Tippruvax tiżżarma jew issewwi l-unità int stess. Ikkuntattja l-appoġġ għall-klijenti għall-għajnuna.

Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja l-pakkett għall-oġġetti li ġejjin:

• Miffy Automatic Hand Soap Dispenser (Yellow)
• Cable tal-Iċċarġjar tal-USB
• Ħitan Mount Bracket
• Manwal għall-Utent (dan id-dokument)

Prodott Overview

Familiarize yourself with the main components of your Miffy Automatic Hand Soap Dispenser.

Figura 1: Quddiem view of the Miffy Automatic Hand Soap Dispenser.

Figure 2: Miffy Automatic Hand Soap Dispensers in yellow and pink, highlighting the design.

• Dispenser Nozzle: Where the foam is dispensed.
• Sensor infra-aħmar: Detects hand movement for automatic dispensing.
• Riżervwar tas-Sapun: Holds the liquid soap, visible through the clear window with the Miffy character.
• Port tal-Iċċarġjar: Port USB għall-iċċarġjar mill-ġdid tal-batterija interna.
• Dawl Indikatur: Shows charging status (red when charging, white when fully charged).

Setup

1. Iċċarġjar tad-Dispenser

Before first use, fully charge the dispenser. A full charge can last for approximately 2-3 months or 5000 uses.

1. Locate the USB charging port, usually at the back or bottom of the unit.
2. Connect the provided USB charging cable to the dispenser and a suitable power source (e.g., USB wall adapter, computer USB port).
3. The indicator light will illuminate red during charging.
4. Charge for 2-3 hours until the indicator light turns white, indicating a full charge.

2. Imla bis-Sapun

The dispenser is compatible with both foam soap and liquid soap. Proper dilution is crucial for liquid soaps to ensure optimal foam production and prevent clogging.

Figure 3: The dispenser ready for use on a surface.

• For Foam Soap: Pour foam soap directly into the reservoir. No dilution is needed.
• For Liquid Soap (e.g., shampoo, face cleaner, dish detergent):
  1. Dilute the liquid soap with water at a ratio of 1:4 (1 part soap to 4 parts water). For example, if you add 50ml of liquid soap, add 200ml of water.
  2. Stir the mixture thoroughly until well combined.
  3. Carefully pour the diluted mixture into the dispenser's reservoir.

  Important: Do not use sticky, creamy hand sanitizers, or detergents containing solid particles directly, as this will block the dispenser.

3. Immuntar mal-Ħajt (Mhux obbligatorju)

A wall mount bracket is included to prevent splashing and keep your bathroom tidy.

Figure 4: The dispenser shown with its wall mount bracket.

1. Clean and dry the desired wall surface.
2. Attach the wall mount bracket to the wall using the adhesive backing or appropriate fasteners (not included for adhesive).
3. Ensure the bracket is securely fixed before placing the dispenser.
4. Carefully place the Miffy Automatic Hand Soap Dispenser onto the bracket.

Istruzzjonijiet Operattivi

Using your Miffy Automatic Hand Soap Dispenser is simple and hygienic.

Figure 5: Hand placed under the sensor for foam dispensing.

1. Ensure the dispenser is charged and filled with appropriate soap.
2. Place your hand within the sensing area, typically directly under the nozzle.
3. The high-precision infrared sensor will detect your hand and dispense foam in approximately 0.25 seconds.
4. Remove your hand once the desired amount of foam is dispensed.

Manutenzjoni

Regular cleaning ensures the longevity and optimal performance of your dispenser.

• Tindif ta' barra: Imsaħ il-barra tad-dispenser b'ċarruta ratba u damp drapp. Tużax tindif jew solventi li joborxu.
• Tindif taż-żennuna: If the nozzle becomes clogged, gently wipe it with a damp cloth. Do not insert any objects into the nozzle.
• Riżervwar tas-Sapun: If changing soap types or if the dispenser will not be used for an extended period, empty and rinse the reservoir with clean water. Dispense some clean water through the nozzle to clear any residue.
• Ħażna: When not in use for a long time, ensure the dispenser is clean, dry, and fully charged. Store it in a cool, dry place.

Issolvi l-problemi

Jekk tiltaqa' ma' problemi bid-dispenser tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official MIPOW websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

Għal aktar assistenza, tista' wkoll tikkuntattja lill-bejjiegħ direttament permezz tal-pjattaforma minn fejn inxtara l-prodott.