Introduzzjoni
Thank you for choosing the CREWORKS 1.8L Digital Ultrasonic Cleaning Machine. This device utilizes ultrasonic cavitation to provide thorough and efficient cleaning for a variety of items, including jewelry, glasses, tools, and more. Please read this manual carefully before operation to ensure proper use, optimal performance, and safety.
Istruzzjonijiet tas-Sigurtà
To prevent injury or damage to the unit, always adhere to the following safety guidelines:
- Żarmax the unit. Refer all servicing to qualified personnel.
- Tużax waħdu. Always supervise the cleaning process.
- Always ensure there is sufficient fluid in the tank before operating the machine. Operating without fluid can damage the unit.
- Qabbad il-magna from the power outlet before filling, draining, or performing any maintenance.
- Żomm l-unità 'l bogħod mit-tfal u l-annimali domestiċi.
- Do not immerse the main body of the unit in water or other liquids.
- Use only appropriate cleaning solutions or water. Avoid flammable, corrosive, or abrasive liquids.
- Kun żgur li l-korda tal-enerġija mhix bil-ħsara u li hija konnessa sew ma' sokit ertjat.
Prodott Overview
The CREWORKS JX-010S is a robust ultrasonic cleaner designed for various applications. It features a durable 304 stainless steel tank and housing, a digital control panel for precise temperature and timer settings, and recessed handles for easy portability.
Komponenti
- Unità Prinċipali: Houses the ultrasonic transducer, heating element, and control circuitry.
- Tank tal-Azzar li ma jsaddadx: The reservoir for cleaning fluid.
- Għatu: Helps contain heat and reduce noise during operation.
- Mesh Basket: Used to hold items during cleaning, preventing them from resting directly on the tank bottom.
- Korda tal-Enerġija: Għall-konnessjoni ma' sokit elettriku.
Panel tal-Kontroll
The digital control panel allows for easy adjustment of cleaning parameters.
- Wiri tat-Temperatura: Shows set and actual temperatures in Celsius.
- Temperature Buttons (SET/ACTUAL, Up/Down): Aġġusta t-temperatura tat-tisħin mixtieqa.
- Wiri tat-Tajmer: Shows set and actual cleaning time in minutes and seconds.
- Timer Buttons (ON/OFF, Up/Down): Adjust the desired cleaning duration.
- Power Button (TEMP/TIME): Initiates or stops the heating/cleaning cycle.
Setup
- Ippakkja: Neħħi bir-reqqa l-apparat tat-tindif ultrasoniku u l-aċċessorji kollha mill-imballaġġ. Iċċekkja għal kwalunkwe ħsara.
- Pjazzament: Place the unit on a stable, level, and dry surface. Ensure adequate ventilation around the machine.
- Imla t-Tank: Open the lid and fill the stainless steel tank with water or a suitable ultrasonic cleaning solution. Do not exceed the 'MAX' fill line. Ensure the fluid level is sufficient to cover the items to be cleaned.
- Qabbad l-Enerġija: Ipplaggja l-korda tad-dawl fi żbokk elettriku ertjat.
Istruzzjonijiet Operattivi
- Ipprepara l-Oġġetti: Place the items to be cleaned into the mesh basket. Avoid overcrowding the basket to ensure effective cleaning.
- Daħħal il-Basket: Carefully lower the mesh basket containing the items into the cleaning tank. Ensure the items are fully submerged in the cleaning fluid.
- Temperatura Issettjata (Mhux obbligatorja): Press the 'TEMP' button. Use the 'Up' and 'Down' arrows to set the desired cleaning temperature (range: 20-80°C or 68-176°F). The machine will begin heating.
- Issettja l-Timer: Press the 'TIME' button. Use the 'Up' and 'Down' arrows to set the desired cleaning duration (range: 1-30 minutes).
- Ibda t-Tindif: Press the 'ON/OFF' button (usually associated with the timer) to start the ultrasonic cleaning cycle. The display will show the remaining time.
- Tissorvelja Proċess: The machine will generate high-frequency sound waves, creating microscopic bubbles that implode (cavitation) to dislodge dirt and grime.
- Tlestija: Once the timer counts down to zero, the machine will automatically stop.
- Neħħi l-Oġġetti: Carefully lift the mesh basket from the tank. Rinse the cleaned items with clean water and dry them thoroughly.
Manutenzjoni
Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tal-apparat tat-tindif ultrasoniku tiegħek.
- Tnixxija: After each use, especially if using cleaning solutions, unplug the unit and carefully drain the fluid from the tank.
- Tindif tat-Tank: Wipe the inside of the stainless steel tank with a soft cloth. For stubborn residue, use a mild, non-abrasive cleaner. Rinse thoroughly.
- Tindif ta' barra: Imsaħ il-parti ta 'barra tal-unità b'annunzjaamp drapp. Tużax prodotti tat-tindif li joborxu jew tgħaddasx l-unità fl-ilma.
- Ħażna: Store the ultrasonic cleaner in a cool, dry place when not in use. Ensure the tank is empty and dry.
Issolvi l-problemi
If you encounter issues with your CREWORKS ultrasonic cleaner, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-unità ma tixgħelx | No power supply; damaged power cord; internal fuse tripped. | Check power connection and outlet. Inspect power cord for damage. If fuse is tripped, contact customer support. |
| No ultrasonic action (no sound/vibration) | Insufficient fluid; unit malfunction. | Ensure tank has sufficient fluid. If problem persists, contact customer support. |
| Riżultati ħżiena tat-tindif | Incorrect cleaning solution; insufficient cleaning time; items too dirty or overcrowded. | Use appropriate cleaning solution. Increase cleaning time. Clean heavily soiled items in multiple cycles or pre-clean. Do not overcrowd basket. |
| It-tisħin mhux qed jaħdem | Ħsara fl-element tat-tisħin. | Ikkuntattja l-appoġġ tal-klijent għall-assistenza. |
Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | JX-010S |
| Dimensjonijiet tal-Prodott | 8.46 x 7.56 x 9.84 pulzieri |
| Piż | 5.18 Liri |
| Volum tat-Tank | 1.8 Litri (0.5 Galun) |
| Qawwa ultrasonika | 60W |
| Qawwa tat-Tisħin | Sa 100W |
| Frekwenza ultrasonika | 40 kHz |
| Firxa tat-Temperatura | 20-80°C (68-176°F) |
| Medda ta' Timer | 1-30 minuta |
| Materjal tat-Tank | 304 Stainless Steel |
| Manifattur | Ekwipaġġi |
Garanzija u Appoġġ
CREWORKS products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your CREWORKS 1.8L Digital Ultrasonic Cleaning Machine, please contact CREWORKS customer service. Details can typically be found on the product packaging or the official CREWORKS websit.
Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal pretensjonijiet ta' garanzija.
