Friedman IR-D Dual Tube Preamp & DI User Manual

1. Introduzzjoni

The Friedman IR-D Dual Tube Preamp & DI is a versatile guitar preamp designed to deliver authentic Friedman amplifier tones in a compact, pedalboard-friendly format. Featuring two independent, foot-switchable channels based on Friedman's Dirty Shirley/Twin Sister designs, the IR-D provides rich harmonic content and responsive touch dynamics. This unit incorporates DSP IR cabinet/power amp simulation for direct recording or front-of-house connection, offering a studio-quality mic'd-up tone. This manual provides essential information for proper setup, operation, and maintenance of your IR-D unit.

2. Prodott Aktarview

2.1 Karatteristiċi ewlenin

• Two independent, identical channels with foot-switchable boost.
• Vol għolitage 12AX7 preamp tubes for authentic tube tone.
• Integrated DSP IR cabinet/power amp simulation with editable Presence and Thump.
• Three multi-function footswitches for channel switching, boost, and IR bypass.
• Comprehensive I/O including effects loop, balanced XLR output, headphones, and USB.

2.2 X'hemm fil-Kaxxa

• Friedman IR-D Dual Tube Preamp & DI unit
• Provvista ta 'Enerġija Universali 12V
• 6 Foot USB 2.0 A Male to B Male cable
• Dan il-Manwal tal-Utent

3. Setup

Before connecting your IR-D, ensure all audio equipment is powered off to prevent damage. The IR-D requires a 12V DC power supply (included).

3.1 Konnessjoni tal-Enerġija

1. Connect the included 12V DC power supply to the "9-12VDC (min 800mA)" input jack on the rear panel of the IR-D.
2. Ipplaggja l-provvista tal-enerġija f'sokit AC xieraq.

3.2 Konnessjonijiet tal-Awdjo

The IR-D offers various connection options for different setups:

• Għal Amplifier's Power Amp Input: Connect the "OUTPUT" jack of the IR-D to the "FX Return" or "Power Amp In" of your guitar amplifier using a standard instrument cable. This bypasses your amppre tal-vitalizamp sezzjoni.
• To a Mixer/Audio Interface (DI): Use an XLR cable to connect the "BALANCED OUT" jack to a mixer, audio interface, or PA system. This output includes the IR cabinet simulation.
• Headphones: Connect headphones to the "HEADPHONES" jack for silent practice. The headphone output also includes IR cabinet simulation.
• Effetti Loop: External effects pedals can be connected via the "SEND" and "RETURN" jacks. Connect the "SEND" to the input of your effects pedal and the output of your effects pedal to the "RETURN" jack.
• Konnessjoni USB: Connect the "USB" port to your computer using the included USB cable for IR loading, firmware updates, and software control.

Image 3.2.1: Rear panel connections of the Friedman IR-D Dual Tube Preamp, showing Input, Send, Return, Balanced Out, Headphones, MIDI, and USB ports, along with the power input.

4. Istruzzjonijiet Operattivi

The Friedman IR-D features two independent channels, each with its own set of controls, plus a global boost function.

Immaġni 4.0.1: Fuq view of the Friedman IR-D Dual Tube Preamp, displaying Channel 1 and Channel 2 controls, and three footswitches for Channel 1, Channel 2, and Boost.

4.1 Għażla tal-Kanal

• Agħfas il- KANAL 1 footswitch to activate Channel 1. The corresponding LED will illuminate.
• Agħfas il- KANAL 2 footswitch to activate Channel 2. The corresponding LED will illuminate.
• Only one channel can be active at a time.

4.2 Boost Funzjoni

• Agħfas il- BOOST footswitch to engage the boost. The boost LED will illuminate.
• The boost can be used with either Channel 1 or Channel 2.
• The boost level is controlled by the "BOOST V." knob for each channel.

4.3 IR Cabinet Simulation

• The IR-D features built-in Impulse Response (IR) cabinet simulation for its DI and headphone outputs.
• To bypass the IR for Channel 1, press and hold the KANAL 1 footswitch. The LED will change color to indicate IR bypass status.
• To bypass the IR for Channel 2, press and hold the KANAL 2 footswitch. The LED will change color to indicate IR bypass status.
• Custom IRs can be loaded via the USB connection and dedicated software. Refer to the Friedman website for software and detailed instructions.

5. Kontrolli u Konnessjonijiet

This section details the functions of all knobs, switches, and jacks on the Friedman IR-D.

Immaġni 5.0.1: Angolata view of the Friedman IR-D Dual Tube Preamp, showing the top panel controls and the side input/output jacks.

5.1 Top Panel Controls (Per Channel)

• CAB/IR Switch: Toggles between different built-in cabinet IRs or user-loaded IRs.
• BOOST V. (Boost Volume): Adjusts the volume level of the engaged boost for the respective channel.
• VOLUM: Controls the overall output volume of the channel.
• TREBLE: Adjusts the high-frequency response of the channel.
• NOFSANI: Adjusts the mid-range frequency response of the channel.
• BASS: Adjusts the low-frequency response of the channel.
• QLIGĦ: Controls the amount of overdrive/distortion for the channel.
• B1/B2 Switches: These are voicing switches, typically affecting the bass response or overall character. Refer to the detailed software manual for specific functions.
• S1/S2 Switches: These are voicing switches, typically affecting the treble response or overall character. Refer to the detailed software manual for specific functions.

5.2 Swiċċijiet tas-saqajn

• CHANNEL 1 (IR Bypass): Toggles Channel 1 on/off. Hold to bypass/engage IR for Channel 1.
• CHANNEL 2 (Loop Bypass): Toggles Channel 2 on/off. Hold to bypass/engage IR for Channel 2.
• BOOST (Store): Toggles the boost function on/off. Hold to save presets (refer to software manual).

5.3 Konnessjonijiet tal-Panew ta' wara

• DĦUL: 1/4" instrument input for your guitar.
• Ibgħat: 1/4" output for connecting to the input of external effects pedals.
• RITORN: 1/4" input for connecting from the output of external effects pedals.
• Bbilanċjat: XLR output for direct connection to a mixer or audio interface. Includes IR simulation.
• HEADPHONES: 1/4" stereo output for headphones. Includes IR simulation.
• MIDI: MIDI input for external control and synchronization.
• USB: USB-B port for connecting to a computer for software control, IR loading, and firmware updates.
• 9-12VDC (min 800mA): Power input jack for the included 12V DC power supply.
• GND LIFT: Ground lift switch for the BALANCED OUT to eliminate hum.

6. Manutenzjoni

To ensure the longevity and optimal performance of your Friedman IR-D, follow these maintenance guidelines:

• Tindif: Uża drapp artab u niexef biex tnaddaf il-barra tal-unità. Evita prodotti tat-tindif, solventi, jew xama' li joborxu.
• Ambjent: Operate and store the unit in a dry environment, away from extreme temperatures, humidity, and direct sunlight.
• Provvista tal-Enerġija: Always use the original or a compatible 12V DC power supply (minimum 800mA) to prevent damage.
• Kura tat-Tubi: Il-pre 12AX7amp tubes are designed for long life. If you suspect a tube issue (e.g., excessive noise, loss of tone), consult a qualified technician for replacement.
• Aġġornamenti tal-Firmware: Periodically check the Friedman Amplifikazzjoni websit għal aġġornamenti tal-firmware biex tiżgura li l-unità tiegħek għandha l-aħħar karatteristiċi u titjib fil-prestazzjoni.

7 Issolvi l-problemi

If you encounter issues with your Friedman IR-D, refer to the following common troubleshooting steps:

• Ebda Qawwa:
  • Ensure the 12V DC power supply is securely connected to both the IR-D and a working AC outlet.
  • Verify the power supply is the correct voltage and current rating (12V DC, min 800mA).
• Ebda Ħsejjes:
  • Check all audio cable connections (input, output, effects loop).
  • Ensure the VOLUME knobs on the IR-D are not set to zero.
  • Jekk tuża amplifier, ensure its volume is up and it is set to the correct input (e.g., FX Return).
  • If using the BALANCED OUT, check mixer/interface input levels and phantom power settings (if applicable, though IR-D does not require it).
  • Test with different cables and instruments to rule out external issues.
• Żanżin jew Ħoss:
  • Engage the "GND LIFT" switch on the rear panel if using the BALANCED OUT.
  • Ensure all power cables are away from audio cables to minimize interference.
  • Test in a different electrical outlet or with a power conditioner.
  • Check for faulty cables or other noisy equipment in your signal chain.
• Unexpected Tone/Functionality:
  • Ensure the correct channel is selected and the boost is engaged/disengaged as desired.
  • Check the CAB/IR switch settings.
  • If using custom IRs, verify they are loaded correctly via the software.
  • Perform a factory reset if issues persist (refer to the Friedman website for instructions on how to perform a factory reset).

If these steps do not resolve the issue, please contact Friedman customer support for further assistance.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

Friedman Amplification products are designed and manufactured to the highest quality standards. For detailed warranty information, product registration, and technical support, please visit the official Friedman Amplifikazzjoni websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.

Riżorsi onlajn: www.friedmanamplifikazzjoni.com

Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal pretensjonijiet ta' garanzija.