Insignia Power Manager 12-Outlet Surge Protector

Introduzzjoni

This manual provides essential information for the safe and effective use of your Insignia Power Manager 12-Outlet Surge Protector (Model: 25C25B). This device is designed to safeguard your electronic equipment from power surges, spikes, and other electrical disturbances, while also providing additional power outlets for your convenience.

Key features include a 4350-joule rating for robust protection, 12 surge-protected outlets (including 4 AC adapter-spaced and 4 always-on outlets), an 8-foot power cord with a right-angle plug for flexible placement, 58dB maximum noise filtering, an energy-saving on/off switch, and LED indicators for surge and ground status.

Image: The Insignia Power Manager 12-Outlet Surge Protector, showcasing its design and multiple outlets.

Informazzjoni dwar is-Sigurtà

Jekk jogħġbok aqra u ifhem l-istruzzjonijiet kollha tas-sigurtà qabel ma tuża dan il-prodott. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, jew ħsara lill-prodott jew lill-apparati konnessi.

• Użu fuq ġewwa biss: This surge protector is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
• Klassifikazzjoni Elettrika: Do not exceed the electrical rating of the surge protector. Refer to the specifications section for details.
• L-ertjar: Ensure the wall outlet is properly grounded. The surge protector must be plugged into a three-prong grounded outlet.
• Evita Daisy Chaining: Do not plug one surge protector into another.
• Ventilazzjoni: Timblokka l-ebda fetħiet tal-ventilazzjoni.
• Tfal u Pets: Żomm fejn ma jintlaħaqx mit-tfal u l-annimali domestiċi.
• Spezzjoni: Regularly inspect the surge protector and its cord for any signs of damage. Discontinue use if damaged.

Setup

1. Ippakkja: Carefully remove the surge protector from its packaging. Retain packaging for future storage or transport.
2. Pjazzament: Place the surge protector on a stable, flat surface, away from sources of water or excessive heat. The 8-foot power cord with a right-angle plug allows for flexible placement, even in tight spaces or behind furniture.
3. Qabbad ma' Wall Outlet: Plug the surge protector's power cord directly into a standard, grounded 120V AC wall outlet. Do not plug it into an extension cord or another surge protector.
4. Ivverifika l-Indikaturi: Once plugged in, check the LED indicators on the surge protector. The 'Protected' and 'Grounded' indicators should illuminate, confirming that the unit is functioning correctly and the wall outlet is properly grounded.
5. Qabbad Apparat: Plug your electronic devices into the available outlets on the surge protector. Utilize the AC adapter-spaced outlets for larger power adapters to prevent blocking adjacent outlets.

Image: (No specific image URL provided for setup, but a visual showing the right-angle plug connected to a wall outlet would be beneficial here.)

Operazzjoni

• Apparat li jħaddem: Once your devices are plugged into the surge protector and the unit is connected to a wall outlet, they will receive power.
• Energy Savings On/Off Switch: Use the master On/Off switch to control power to all connected devices simultaneously. This switch allows for simple power conservation by cutting power to all devices when not in use, preventing standby power drain.
• Indikaturi LED:
  • LED protett: When illuminated, this indicates that the surge protection circuitry is active and protecting your devices. If this light goes out, the surge protection has been compromised, and the unit should be replaced.
  • Grounded LED: When illuminated, this indicates that the wall outlet is properly grounded. If this light is not on, the wall outlet may not be grounded, and you should consult a qualified electrician.
• Always-On Outlets: Four of the 12 outlets are designated as 'always-on' outlets. These outlets remain powered regardless of the state of the energy savings on/off switch, suitable for devices that require continuous power.

Image: (No specific image URL provided for LED indicators, but a close-up of the LED lights and the On/Off switch would be helpful here.)

Manutenzjoni

• Tindif: Disconnect the surge protector from the wall outlet and all connected devices before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
• Nuqqas ta' Protezzjoni minn Surge: If the 'Protected' LED indicator turns off, it means the surge protection components have absorbed a significant surge and are no longer providing protection. The unit will still function as a power strip, but your devices will no longer be protected from surges. In this event, the surge protector should be replaced to ensure continued protection.
• Spezzjoni regolari: Periodically check the power cord and the surge protector housing for any signs of damage, such as fraying, cuts, or cracks. If damage is found, discontinue use immediately and replace the unit.

Issolvi l-problemi

Speċifikazzjonijiet

• Numru tal-Mudell: 25C25B
• Ditta: INSINJJA
• Ħwienet tal-Enerġija Totali: 12 (including 4 AC adapter-spaced and 4 always-on)
• Klassifikazzjoni tal-Protezzjoni minn Surge: 4350 Joules
• Noise Filtering: 58dB massimu
• Tul tal-Kable tal-Enerġija: 8 feet (with right-angle plug)
• Piż tal-oġġett: 12.7 uqija
• Dimensjonijiet tal-pakkett: 13.78 x 7.32 x 2.13 pulzieri
• Karatteristika Speċjali: Energy savings on/off switch, LED indicators (Surge, Grounded)

Garanzija u Appoġġ

For warranty information, technical support, or customer service regarding your Insignia Power Manager 12-Outlet Surge Protector, please refer to the official INSIGNIA webis-sit jew ikkuntattja l-appoġġ għall-klijenti tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek għal talbiet ta' garanzija.

You can typically find contact information and detailed warranty terms on the manufacturer's official support pages. Please have your model number (25C25B) available when contacting support.