ACEBEAM E75 Quad-Core High-Performance Rechargeable Flashlight

1. Introduzzjoni

Grazzi tax-xiriasing the ACEBEAM E75 Quad-Core High-Performance Rechargeable Flashlight. This manual provides detailed instructions for the safe and proper use, maintenance, and troubleshooting of your new flashlight. Please read this manual thoroughly before operating the device and retain it for future reference.

Kontenut tal-Pakkett:

• ACEBEAM E75 Flashlight
• Rechargeable Lithium-Ion Battery (included)
• Cable tal-Iċċarġjar tal-USB tat-Tip-Ċ
• O-rings żejda
• Lanyard
• USB-C Port Rubber Cover
• Manwal għall-Utent

Image 1: The ACEBEAM E75 flashlight shown with its included rechargeable battery, USB Type-C charging cable, and product packaging.

2. Karatteristiċi tal-prodott

• Equipped with 4 x High CRI 5000K Neutral White LEDs.
• Ħruġ massimu ta' 3000 lumens.
• Maximum beam throw of 260 meters.
• Powered by a high-capacity rechargeable Lithium-Ion battery.
• Integrated USB Type-C charging port with battery level indicator.
• Single side switch for intuitive control of six lighting modes, including a strobe function.
• Durable tempered glass lens with Anti-Reflective (AR) film plating for high light transmittance.
• Two-way body clip for versatile carrying options.
• Magnetic tail cap for hands-free attachment to metal surfaces.
• Constructed from aerospace-grade aluminum alloy with a premium Type III hard-anodized anti-abrasive finish.
• IP68 waterproof rating (submersible up to 2 meters).
• Impact resistance up to 1.5 meters.

Image 2: Visual representation of the ACEBEAM E75's quad-core high-performance output, highlighting its maximum throw distance and LED configuration.

3. Setup

3.1 Installazzjoni tal-batterija

1. Ħoll l-għatu tad-denb tat-torċa kontra l-arloġġ.
2. Insert the included Lithium-Ion battery with the positive (+) terminal facing towards the flashlight head.
3. Invita l-għatu tad-denb lura lejn l-arloġġ sakemm ikun issikkat sew. Kun żgur li l-O-ring ikun imqiegħed sew biex iżżomm ir-reżistenza għall-ilma.

3.2 Iċċarġjar inizjali

It is recommended to fully charge the battery before first use to ensure optimal performance and battery longevity.

• Locate the USB Type-C charging port on the flashlight body, usually covered by a rubber flap.
• Erfa' l-għatu tal-gomma bil-mod biex tikxef il-port.
• Connect the provided USB Type-C charging cable to the flashlight and plug the other end into a USB power source (e.g., computer, wall adapter, power bank).
• The battery level indicator will show the charging status. Refer to the 'Charging' section for details on indicator behavior.
• Once charging is complete, disconnect the cable and firmly press the rubber cover back into place to seal the port, maintaining its waterproof integrity.

4. Istruzzjonijiet Operattivi

4.1 Power On/Off

• Biex Tixgħel: Press and hold the side switch for approximately 0.5 seconds.
• Biex Tintefa: Press and hold the side switch for approximately 0.5 seconds when the flashlight is on.

4.2 Mode Switching (Brightness Levels)

• When the flashlight is on, single-click the side switch to cycle through the brightness levels: Ultra-Low → Low → Mid → High.
• The flashlight will memorize the last used brightness level (except for Strobe) and turn on at that level next time.

4.3 Modalità Turbo

• From any mode (including off), double-click the side switch to activate Turbo mode (maximum output).
• Double-click again to return to the previous brightness level.

4.4 Modalità Strobe

• From any mode (including off), triple-click the side switch to activate Strobe mode.
• Single-click to exit Strobe mode and return to the previous brightness level.

4.5 Lock/Unlock Function

• Biex Tissakkar: When the flashlight is off, press and hold the side switch for 3 seconds. The flashlight will flash twice to indicate it is locked.
• Biex Nisfruttaw: When the flashlight is locked, press and hold the side switch for 3 seconds. The flashlight will flash twice and then turn on at the Ultra-Low mode.
• The lock function prevents accidental activation during transport or storage.

4.6 Indikatur tal-Livell tal-Batterija

The indicator light on the side switch displays the battery status:

• Dawl aħdar: Batterija voltage is above 3.1V (sufficient power).
• Dawl aħmar: Batterija voltage is between 2.9V and 3.1V (low power, recharge soon).
• Dawl aħmar li jteptep: Batterija voltage is below 2.9V (critical power, recharge immediately).

5. Iċċarġjar

The ACEBEAM E75 features a built-in USB Type-C charging port for convenient recharging of the included Lithium-Ion battery.

1. Ensure the flashlight is turned off before charging.
2. Open the rubber cover protecting the USB Type-C port.
3. Connect the USB Type-C cable to the flashlight and a suitable USB power source.
4. During charging, the indicator light on the side switch will glow red.
5. Ladarba l-batterija tkun kompletament iċċarġjata, id-dawl indikatur isir aħdar.
6. After charging, disconnect the cable and firmly close the rubber cover to maintain the flashlight's waterproof rating.

6. Manutenzjoni

6.1 Tindif

• Naddaf il-qafas tat-torċa b'ċarruta ratba u damp drapp. Evita materjali li joborxu jew kimiċi ħarxa.
• Keep the lens clean to ensure maximum light output. Use a lens cleaning cloth if necessary.
• Periodically clean the threads of the tail cap and apply a thin layer of silicone grease to maintain smooth operation and water resistance.

6.2 Sostituzzjoni tal-O-Ring

• Inspect the O-rings regularly for wear or damage.
• Replace worn O-rings with the provided spares to maintain the IP68 waterproof rating.
• Apply a thin layer of silicone grease to new O-rings before installation.

6.3 Kura tal-Batterija

• Store the flashlight with a partially charged battery if not used for extended periods.
• Recharge the battery every 3-6 months to prevent over-discharge and prolong battery life.
• If the flashlight will not be used for a long time, remove the battery to prevent potential leakage.

7 Issolvi l-problemi

• Il-flashlight ma tixgħelx:
  • Iċċekkja jekk il-batterija hijiex imdaħħla sew bit-terminal pożittiv (+) iħares lejn ir-ras.
  • Żgura li t-tapp tad-denb ikun issikkat kompletament.
  • Charge the battery. The battery might be depleted.
  • Check if the flashlight is in lock mode. Unlock it by pressing and holding the side switch for 3 seconds.
• Light output is dim or flickers:
  • Il-batterija tista’ tkun baxxa. Erġa’ ċċarġja l-batterija.
  • Naddaf il-kuntatti tal-batterija u l-kuntatti tat-torċa b'ċarruta nadifa.
• Dħul tal-ilma:
  • Żgura li t-tapp tad-denb ikun issikkat kompletament.
  • Check the O-rings for damage or improper seating. Replace if necessary.
  • Ensure the USB Type-C port rubber cover is securely closed.

8. Speċifikazzjonijiet

9. Informazzjoni dwar is-Sigurtà

• Do not shine the flashlight directly into eyes. The powerful beam can cause temporary vision impairment or permanent eye damage.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Do not disassemble the sealed head of the flashlight, as this may damage the LEDs and void the warranty.
• Evita li tesponi l-flashlight għal temperaturi estremi jew dawl tax-xemx dirett għal perjodi twal.
• Uża biss it-tip ta' batterija u l-kejbil tal-iċċarġjar rakkomandati.
• Ensure the USB Type-C port cover is securely closed when not charging to maintain water resistance.

10. Garanzija u Appoġġ

ACEBEAM products are manufactured with high-quality materials and craftsmanship. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ACEBEAM websit.

For technical support, service, or warranty claims, please contact ACEBEAM customer service or visit the official ACEBEAM store online:

Visit the ACEBEAM Store on Amazon