iJoy Disney Tim Burton's The Nightmare Before Christmas Bluetooth Speaker

Introduzzjoni

This manual provides instructions for the operation and maintenance of your iJoy Disney Tim Burton's The Nightmare Before Christmas Bluetooth Speaker. This portable, splashproof wireless speaker features Bluetooth connectivity, an SD card slot, and FM radio functionality, allowing for versatile audio playback.

Image: The iJoy Disney Tim Burton's The Nightmare Before Christmas Bluetooth Speaker, featuring Jack Skellington and Sally artwork.

X'hemm fil-Kaxxa

Jekk jogħġbok ivverifika li l-oġġetti kollha huma preżenti:

• Kelliem Bluetooth
• Cable tal-Iċċarġjar tal-USB
• Kejbil AUX tal-Backup
• Manwal tas-Sid (dan id-dokument)

Setup

1. Iċċarġja l-Ispeaker

Before initial use, fully charge the speaker. Connect the provided USB charging cable to the speaker's Micro USB charging port and to a standard USB power source (e.g., computer USB port, USB wall adapter). The LED indicator light will illuminate during charging and turn off when fully charged. A full charge typically takes approximately 2 hours.

2. Tixgħil / Mitfi

Press and hold the Power On/Off button located on the top panel of the speaker to turn the device on or off. A sound prompt will indicate the power status.

3. Tqabbil tal-Bluetooth

1. Ensure the speaker is powered on and in Bluetooth pairing mode. The LED indicator will flash, indicating it is ready to pair.
2. Fuq l-apparat mobbli tiegħek (smartphone, tablet, eċċ.), attiva l-Bluetooth u fittex apparati disponibbli.
3. Select "iJoy Speaker" or a similar name from the list of found devices.
4. Once paired, the speaker will emit a confirmation sound, and the LED indicator will stop flashing and remain solid.

Immaġni: Close-up view of the speaker's top panel revealing the AUX port, SD card slot, Micro USB charging port, and USB port.

Istruzzjonijiet Operattivi

Buttuni tal-Kontroll Fuqview

Immaġni: Fuq view of the speaker showing the control buttons: Volume -, Volume +, Play/Pause/Take Call, Mode Switch, and Power On/Off.

• Volum -: Agħfas biex tnaqqas il-volum.
• Volum +: Agħfas biex iżżid il-volum.
• Play / Pause / Take Call: Press to play or pause audio. Press to answer an incoming call. Press and hold to reject an incoming call.
• Swiċċ tal-Modalità (M): Press to cycle through available modes: Bluetooth, FM Radio, SD Card, AUX.
• Power Mixgħul / Mitfi: Agħfas u żomm biex tixgħel jew titfi l-ispiker.

Modalità Bluetooth

After successful pairing (refer to Setup section), your speaker will automatically connect to the last paired device when powered on. Audio from your device will play through the speaker.

Modalità SD Card

Insert a Micro SD card (TF card) containing MP3 audio files into the SD card slot. The speaker will automatically switch to SD card mode and begin playing music. Use the Play/Pause and Volume buttons to control playback.

Modalità tar-Radju FM

Press the 'M' (Mode Switch) button until you hear the FM radio. For best reception, ensure the speaker is in an open area. Use the Play/Pause button to auto-scan and save available stations. Use the Volume buttons to navigate between saved stations (short press) or adjust volume (long press).

Modalità AUX

Connect an external audio device using the provided 3.5mm AUX cable to the speaker's AUX port. The speaker will automatically switch to AUX mode. Control playback from your connected device.

Immaniġġjar tas-Sejħiet

When connected via Bluetooth to a smartphone, the speaker can be used for hands-free calls. Press the Play/Pause button to answer an incoming call. Press it again to end the call. Press and hold the Play/Pause button to reject an incoming call.

Manutenzjoni

Tindif

Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals. Ensure all ports are dry before charging or connecting cables.

Reżistenza għall-Ilma

This speaker is IPX4 rated, meaning it is splashproof and resistant to water splashes from any direction. It is not designed to be submerged in water. Avoid exposing the speaker to heavy rain or direct water jets.

Issolvi l-problemi

• Speaker will not power on: Ensure the battery is charged. Connect the speaker to a power source using the USB charging cable and try again.
• Ma tistax tqabbad permezz tal-Bluetooth: Ensure the speaker is in pairing mode (flashing LED). Make sure Bluetooth is enabled on your device and it is within range (up to 30 feet). Try restarting both the speaker and your device.
• L-ebda ħoss jew volum baxx: Check the volume levels on both the speaker and your connected device. Ensure the correct mode (Bluetooth, SD, FM, AUX) is selected.
• Kwalità tal-ħoss fqira: Mexxi l-ispiker eqreb lejn l-apparat Bluetooth tiegħek biex tnaqqas l-interferenza. Kun żgur li m'hemm l-ebda ostaklu bejn l-ispiker u l-apparat.
• Ir-riċeviment tar-radju FM huwa ħażin: Try moving the speaker to a location with better signal reception, away from electronic interference.

Speċifikazzjonijiet

Image: Diagram illustrating the speaker's dimensions: 6.3 inches tall and 2.9 inches across.

Informazzjoni dwar Garanzija

This product is covered by a 90-day manufacturer's warranty. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and does not cover damage caused by misuse, accidents, or unauthorized modifications.

Appoġġ għall-Klijent

For further assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact iJoy customer support. Refer to the product packaging or the official iJoy websit għal informazzjoni ta' kuntatt attwali.