CREWORKS Electric Wire Stripper Machine (Model: 1 Channel-for1.5-23mm Wires)

1. Introduzzjoni

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of your CREWORKS Electric Wire Stripper Machine. This automatic wire stripping machine is designed to remove insulation from various types of electrical wires, facilitating cable recycling processes. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage.

2. Istruzzjonijiet tas-Sigurtà

TWISSIJA: Nuqqas li ssegwi dawn l-istruzzjonijiet ta’ sigurtà jista’ jirriżulta f’xokk elettriku, nar, jew korriment serju.

Dejjem ilbes tagħmir protettiv personali (PPE) xieraq, inklużi nuċċalijiet u ingwanti tas-sigurtà, meta tħaddem il-magna.
Ensure the machine is placed on a stable, level surface and securely fastened before operation.
Keep hands and loose clothing away from moving parts, especially the blade and rollers, during operation.
Disconnect the power supply before performing any adjustments, maintenance, or cleaning.
Tħaddimx il-magna f'postijiet imxarrba jew niexfa.amp kundizzjonijiet.
Kun żgur li l-korda tal-enerġija tkun f'kundizzjoni tajba u ertjata sew.
Żomm it-tfal u l-persunal mhux awtorizzat 'il bogħod miż-żona tal-operazzjoni.
Do not force wires into the feed hole. Adjust the blade height and feed hole appropriately for the wire size.
In case of malfunction, immediately turn off the machine and disconnect it from the power source. Contact qualified service personnel for repairs.

3. Prodott Aktarview

The CREWORKS Electric Wire Stripper Machine is designed for efficient and safe removal of insulation from various types of wires. It features an adjustable feed hole, a durable CrMoV12 steel blade, and a robust aluminum frame for long-lasting performance.

3.1 Karatteristiċi ewlenin

Operazzjoni Awtomatika: Strips wires at speeds up to 49 ft./min. (15 m/min.).
Kompatibilità Wiesgħa: Adjustable feed hole accommodates wires from 0.06" to 0.9" (1.5 to 23 mm) in diameter.
Xafra dejjiema: CrMoV12 steel blade ensures clean cuts and extended sharpness.
Adjustable Blade Height: Knob for precise blade adjustment to suit different insulation thicknesses.
Stable Feeding: V-shaped grooved roller system for secure wire guidance and to prevent tangling.
Kostruzzjoni robusta: Reinforced aluminum frame for stability and durability.
Disinn kompatt: Portable for use in various locations.

3.2 Komponenti

CREWORKS Electric Wire Stripper Machine main view — **Figura 1:** Prinċipali view of the CREWORKS Electric Wire Stripper Machine. This image displays the overall structure of the machine, including the motor housing, adjustable feed mechanism, and power cord.

Djar tal-Mutur: Fih il-mutur ta' 180W.
Adjustable Feed Hole Plate: Mechanism for adjusting the wire entry point and blade depth.
Blade Adjustment Knob: Used to raise or lower the cutting blade.
Gwardja tas-Sigurtà: Protects the user from the cutting blade.
Swiċċ tal-Enerġija: On/Off control for the machine.
V-shaped Grooved Roller: Guides the wire through the stripping mechanism.
Qafas tal-Aluminju Rinforzat: Provides structural integrity.

Adjustable Feed Hole Plate detail — **Figura 2:** Detail of the adjustable feed hole plate. This image highlights the stepless adjustment mechanism and the handy knob for precise control over the wire entry point, accommodating various cable sizes from 0.06" to 0.9".

Ultra-sharp CrMoV12 steel blade detail — **Figura 3:** Close-up of the ultra-sharp CrMoV12 steel blade and roller mechanism. This view emphasizes the blade's material properties (high hardness, exceptional resilience, wear resistance, lasting durability) and its interaction with the wire.

High-efficiency roller and holder mechanism — **Figura 4:** Illustration of the high-efficiency roller and holder. This image shows the V-shaped grooved roller designed to securely hold flexible cables, preventing tangling and ensuring consistent stripping.

4. Setup

Spakkjar: Carefully remove the wire stripper from its packaging. Inspect for any signs of damage during transit.
Pjazzament: Position the machine on a sturdy, level workbench or surface. The machine weighs approximately 17.16 lbs (7.8 kg), so ensure the surface can support it.
Żgurar tal-Magni: For optimal stability and safety, it is recommended to bolt the machine to your workbench using appropriate fasteners (not included). The base of the machine has pre-drilled holes for this purpose.
Konnessjoni tal-Enerġija: Connect the power cord to a standard 110V AC grounded electrical outlet. Ensure the power switch on the machine is in the "OFF" position before plugging it in.
Initial Blade Adjustment: Before first use, familiarize yourself with the blade adjustment knob. Rotate the knob to raise or lower the blade. For initial setup, ensure the blade is slightly above the wire path.

5. Istruzzjonijiet Operattivi

Segwi dawn il-passi għal tneħħija tal-wajers b'mod sikur u effettiv:

Step-by-step wire stripping process — **Figura 5:** Visual guide for the wire stripping process. This image illustrates the four main steps: adjusting the blade, releasing the safety guard, powering on, and feeding the wire.

Aġġusta l-Għoli tax-Xafra: Rotate the blade adjustment knob (located on top) to set the desired blade height. The blade should score the insulation without cutting into the copper conductor. Start with a shallower cut and adjust deeper if necessary.
Release Safety Guard: Loosen the locking knob on the safety guard and move it to an open position to allow wire insertion. Ensure it is securely locked back in place once the wire is positioned.
Qawwa Mixgħul: Turn on the machine using the power switch. The motor will start, and the rollers will begin to rotate.
Wajer tal-Għalf: Carefully insert the end of the wire into the adjustable feed hole. The V-shaped grooved roller will grip the wire and pull it through the machine. Guide the wire steadily.
Iġbor il-Wajer Imqaxxar: The stripped insulation will separate from the copper conductor as the wire passes through. Collect the stripped copper wire from the rear outlet.
Itfi: Once stripping is complete, turn off the machine using the power switch.

The machine is compatible with various wire types, including copper wires, multi-conductor wires, electrical wires, stranded wires, and automotive wires, within the specified diameter range.

Wire compatibility chart — **Figura 6:** Diagram illustrating the wide range of wire types compatible with the machine, including copper, multi-conductor, electrical, stranded, and automotive wires, all within the 0.06" to 0.9" (1.5-23 mm) diameter range.

6. Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your wire stripper. Always disconnect the machine from the power source before performing any maintenance.

Tindif: After each use, clean any accumulated insulation debris from the blade area, rollers, and feed hole using a brush or compressed air. Do not use water or solvents directly on electrical components.
Spezzjoni tax-xafra: Periodically inspect the CrMoV12 steel blade for sharpness and damage. A dull or chipped blade can lead to inefficient stripping or damage to the wire. Replace the blade if necessary.
Spezzjoni tar-Rombli: Check the V-shaped grooved rollers for wear or damage. Ensure they rotate freely and provide adequate grip.
Lubrikazzjoni: Refer to the product's specific lubrication requirements. While the manual does not specify, general practice for geared machinery suggests occasional lubrication of moving parts (excluding electrical components) with appropriate grease or oil.
Ħażna: Store the machine in a dry, clean environment, away from direct sunlight and extreme temperatures.

7 Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
Il-magna ma tixgħelx.	Korda tad-dawl mhux imdaħħla. L-ebda enerġija mis-sokit. Is-swiċċ tal-enerġija huwa mitfi.	Ensure power cord is securely plugged into a grounded 110V outlet. Iċċekkja s-circuit breaker jew ipprova sokit differenti. Dawwar is-swiċċ tal-enerġija għall-pożizzjoni "ON".
Wire is not stripping cleanly or is being cut.	Incorrect blade height adjustment. Xafra matta jew bil-ħsara. Wire not centered in feed hole.	Adjust the blade height knob. The blade should score the insulation without cutting the conductor. Inspect the blade and replace if dull or damaged. Ensure the wire is properly aligned with the V-shaped groove.
Wire is not feeding through the machine.	Blade height too low, jamming the wire. Rollers are dirty or worn. Wire diameter is outside the machine's range.	Raise the blade slightly using the adjustment knob. Clean the rollers. If worn, contact support for replacement parts. Verify the wire diameter is between 0.06" and 0.9" (1.5-23 mm).
Ħoss jew vibrazzjoni eċċessiv waqt it-tħaddim.	Machine not securely mounted. Kwistjoni ta' komponent intern.	Ensure the machine is firmly bolted to a stable surface. If noise persists, discontinue use and contact CREWORKS customer support.

8. Speċifikazzjonijiet

Karatteristika	Dettall
Brand	Ekwipaġġi
Numru tal-Mudell	1 Channel-for1.5-23mm Wires
Materjal	Alloy Steel (Blade: CrMoV12), Reinforced Aluminum Frame
Kulur	Griż
Piż tal-oġġett	17.16 libbra (7.8 Kilogrammi)
Sors tal-Enerġija	AC
Voltage	110 Volts
Wattage	180 Watts
Veloċità tat-Tqaxxir	Up to 49 ft./min. (15 m/min.)
Wire Diameter Range	0.06" - 0.9" (1.5 - 23 mm)
Dimensjonijiet tal-Pakkett	14.84 x 13.3 x 7.4 pulzieri
Komponenti Inklużi	Wire stripper machine

9. Garanzija u Appoġġ

For warranty information or technical support, please contact CREWORKS customer service. Details regarding specific warranty periods and terms are typically provided with your purchase documentation or can be found on the official CREWORKS websit.

Informazzjoni ta' Kuntatt: Please refer to your purchase receipt or the CREWORKS official websit għad-dettalji ta' kuntatt tal-appoġġ għall-klijenti l-aktar aġġornati.

	CREWORKS Manual Wire Stripper User Manual User manual for the CREWORKS Manual Wire Stripper, providing comprehensive instructions on safety, specifications, package contents, installation, operation, maintenance, and troubleshooting for effective wire stripping.
	Manwal tal-Utent tal-Istripper Awtomatiku tal-Wajers CREWORKS - WSM-N030-UK Manwal tal-utent għall-CREWORKS Automatic Wire Stripper, mudell WSM-N030-UK. Din il-gwida tipprovdi informazzjoni essenzjali dwar is-sigurtà, speċifikazzjonijiet dettaljati, struzzjonijiet ta' tħaddim pass pass, proċeduri ta' manutenzjoni, u pariri għas-soluzzjoni tal-problemi għal tneħħija effiċjenti tal-wajers.
	CREWORKS Manual Wire Stripper User Manual This user manual provides detailed instructions for the CREWORKS Manual Wire Stripper. It covers safety precautions, product specifications, package contents, installation steps, operation procedures, maintenance guidelines, and troubleshooting tips to ensure safe and effective use of the tool.
	Manwal tal-Utent tal-Magna tal-Istampa bis-Sħana - Tħaddim, Speċifikazzjonijiet, u Soluzzjoni ta' Problemi Manwal komprensiv għall-utent għall-Magna tal-Istampa bis-Sħana, li jkopri informazzjoni dwar is-sigurtà, speċifikazzjonijiet, dijagramma tal-prodott, installazzjoni, tħaddim, settings rakkomandati, aġġustament, manutenzjoni, issolvi l-problemi, u rimi. Jinkludi dettalji dwar il-mudelli WBFHPM20OZ u WBFHPM30OZ.
	Manwal tal-Utent tal-Magna tal-Istampa tas-Sħana Manwal tal-utent għall-Magna tal-Istampa tas-Sħana, li jipprovdi informazzjoni dwar is-sigurtà, speċifikazzjonijiet, installazzjoni, tħaddim, issolvi l-problemi, u linji gwida dwar il-manutenzjoni.
	High-Pressure Air Compressor User Manual User manual for the High-Pressure Air Compressor, detailing safety information, specifications, package contents, product diagram, assembly, operation, maintenance, troubleshooting, and disposal.

CREWORKS 1 Channel-for1.5-23mm Wires

CREWORKS Electric Wire Stripper Machine (Model: 1 Channel-for1.5-23mm Wires) - User Manual