Braun TexStyle 1 SI1019RD Steam Iron User Manual

1. Introduzzjoni

Thank you for choosing the Braun TexStyle 1 SI1019RD Steam Iron. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your appliance. Please read these instructions carefully before first use and keep them for future reference.

2. Istruzzjonijiet Importanti dwar is-Sigurtà

• Always unplug the iron from the power outlet before filling with water, emptying, or when not in use.
• Do not touch the hot soleplate. Always use the handle.
• Keep the iron and its cord out of reach of children and pets.
• Use the iron on a stable, heat-resistant surface. When placing the iron on its heel rest, ensure the surface is level.
• Qatt m'għandek tgħaddas il-ħadid, il-korda tal-enerġija, jew il-plagg fl-ilma jew f'likwidi oħra.
• Do not operate the iron if the power cord or plug is damaged, or if the iron has been dropped or damaged in any way. Contact authorized service personnel for repair.
• Only use tap water for filling the water tank, unless you live in a very hard water area, in which case distilled or demineralized water is recommended. Do not use perfumed water or additives.
• Tħallix il-ħadid waħdu waqt li jkun mixgħul jew imqabbad mal-provvista tal-elettriku.

3. Prodott Aktarview

The Braun TexStyle 1 SI1019RD steam iron is designed for efficient and effortless ironing. It features a high-quality non-stick soleplate for smooth gliding and a precision tip to reach difficult areas like collars and seams. With 1900 watts of power, it heats up quickly, ready to tackle various fabrics.

Immaġni: Minn fuq għal isfel view of the Braun TexStyle 1 SI1019RD Steam Iron, highlighting the non-stick soleplate and steam vents.

Immaġni: Ġenb view of the Braun TexStyle 1 SI1019RD Steam Iron, displaying the temperature control dial and water filling inlet.

4. Setup

4.1 Disimballaġġ

• Oħroġ il-ħadid u l-aċċessorji kollha mill-imballaġġ bir-reqqa.
• Remove any protective film, stickers, or labels from the soleplate or body of the iron.
• For the first use, it is recommended to iron an old piece of fabric to remove any manufacturing residues from the soleplate.

4.2 Mili tat-Tank tal-Ilma

• Kun żgur li l-ħadid huwa skonnettjat mis-sokit tal-elettriku.
• Iftaħ l-għatu tad-daħla tal-ilma.
• Fill the water tank with tap water up to the 'MAX' mark (220 ml capacity). Do not overfill.
• Agħlaq l-għatu tad-daħla tal-ilma sew.

5. Istruzzjonijiet Operattivi

5.1 Kontroll tat-Temperatura

• Ipplaggja l-ħadid f'sokit tal-elettriku adattat.
• Turn the thermostat dial to the desired temperature setting according to the fabric type. Refer to the fabric care labels on your garments.
• The indicator light will illuminate, indicating the iron is heating. It will turn off when the set temperature is reached (approximately 35 seconds for maximum heat).

5.2 Mogħdija bil-Fwar

• Kun żgur li t-tank tal-ilma jkun mimli.
• Set the temperature dial to a steam-suitable setting (usually indicated by steam symbols on the dial).
• Once the indicator light goes out, select the desired steam level using the steam selector. For a powerful steam boost, use the 'Turbo' mode (25 g/min).
• Ibda l-mogħdija.

5.3 Mogħdija Niexfa

• Ensure the water tank is empty or the steam selector is set to '0' (no steam).
• Set the temperature dial to the desired fabric setting.
• Wait for the indicator light to go out before ironing.

5.4 Steam Shot Function

• For an extra burst of steam to remove stubborn wrinkles, press the steam shot button.
• Wait a few seconds between shots to allow the iron to generate sufficient steam.

5.5 Fwar Vertikali

• Hold the iron vertically, close to the hanging garment (e.g., curtains, suits).
• Press the steam shot button repeatedly to release steam and smooth out wrinkles.

5.6 Funzjoni tal-isprej

• Press the spray button to lightly moisten the fabric, which can help in removing wrinkles.

6. Manutenzjoni u Tindif

6.1 Tindif tal-Soleplate

• Dejjem aqla’ l-ħadid mill-plagg u ħallih jiksaħ kompletament qabel ma tnaddaf.
• Imsaħ is-soleplate bl-adamp cloth. For stubborn stains, use a mild, non-abrasive cleaner specifically designed for iron soleplates.
• Never use abrasive scouring pads, vinegar, or harsh chemicals, as these can damage the non-stick coating.

6.2 Descaling (Self-Clean Function)

• Regular descaling helps maintain steam performance and prolong the life of your iron.
• Refer to the specific instructions in your iron's full manual for the self-clean procedure, typically involving filling the tank, heating the iron, and activating a self-clean button to flush out mineral deposits.

6.3 Ħażna

• After each use, unplug the iron and empty any remaining water from the tank.
• Ħalli l-ħadid jiksaħ kompletament.
• Kebbeb il-korda tal-enerġija pulit madwar il-mistrieħ tal-għarqub.
• Store the iron upright on its heel rest in a safe, dry place.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

Your Braun TexStyle 1 SI1019RD Steam Iron is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions, including the warranty period and coverage details.

For technical support, service, or to inquire about replacement parts, please contact Braun customer service in your region. You can usually find contact information on the Braun official webis-sit jew fuq il-karta tal-garanzija.