UEi EM720SPKIT Static Pressure Hi-Res Differential Manometer Kit User Manual

1. Prodott Aktarview and Kit Contents

The UEi EM720SPKIT is a comprehensive kit designed for precise measurement of static and differential pressure, crucial for HVAC/R technicians and professionals. It includes the EM720 manometer and various accessories to facilitate accurate readings in diverse applications.

Figura 1: The EM720SPKIT includes the EM720 manometer, various probes, tubing, fittings, and a soft carrying case for convenient transport and storage. The manometer displays pressure readings and temperature.

1.1. X'hemm fil-Kaxxa

• EM720 Manometer (High resolution differential manometer with temperature compensation)
• Stepped T Fitting (2)
• Static Pressure Probe (2)
• Pressure Tubing with Brass Fitting (2)
• Step Connector with 3.15-inch Tubing (2)
• 60-inch Pressure Tube
• Batteries (pre-installed or included)
• Każ tal-Ġarr Artab
• Manwal għall-Utent (dan id-dokument)

2. Informazzjoni dwar is-Sigurtà

Please read and understand all safety warnings and operating instructions before using this instrument. Failure to do so may result in injury or damage to the instrument.

• Always wear appropriate personal protective equipment (PPE) when working with pressure systems.
• Do not exceed the maximum pressure rating of ±80 in WC.
• Kun żgur li l-konnessjonijiet kollha huma siguri qabel ma tapplika pressjoni.
• Do not expose the instrument to extreme temperatures, humidity, or corrosive environments.
• Remove batteries if the instrument is not used for an extended period to prevent leakage.
• Refer to local regulations and industry standards for specific application safety guidelines.

3. Setup

3.1. Installazzjoni tal-batterija

1. Locate the battery compartment cover on the rear of the EM720 manometer.
2. Iftaħ l-għatu billi tiżżerżaqh jew tneħħi l-viti.
3. Insert the included batteries, observing the correct polarity (+ and -) as indicated inside the compartment.
4. Ibdel l-għatu tal-kompartiment tal-batterija b'mod sikur.

3.2. Connecting Probes and Tubing

The EM720SPKIT includes various accessories for different measurement scenarios:

• Static Pressure Measurement: Connect one static pressure probe to an input port (P1 or P2) on the top of the manometer using the pressure tubing.
• Differential Pressure Measurement: Connect tubing from two different pressure points to both input ports (P1 and P2). Ensure P1 is connected to the higher pressure side and P2 to the lower pressure side for positive differential readings.
• Using Fittings: Utilize the stepped T fittings and step connectors as needed to adapt to different port sizes or to create a manifold for specific test setups.

Always ensure connections are snug to prevent pressure leaks, which can affect measurement accuracy.

4. Istruzzjonijiet Operattivi

4.1. Power On/Off

• To power on the EM720, press the QAWWA button (typically marked with a circle and vertical line symbol).
• Biex tintefa, agħfas u żomm il-buttuna QAWWA button until the display turns off. The instrument may also have an auto-power off feature to conserve battery life.

4.2. Zeroing the Manometer

Before taking measurements, it is crucial to zero the manometer to ensure accuracy. Disconnect all pressure tubing from the input ports (or ensure both ports are open to ambient air) and allow the instrument to stabilize.

• Agħfas il- DIF ZERO button. The display should show a reading close to zero.
• If the reading does not zero, ensure no pressure is applied to the ports and repeat the zeroing process.

4.3. Selecting Measurement Units

The EM720 supports multiple pressure units.

• Agħfas il- UNITÀ button to cycle through available pressure units (e.g., in WC, Pa, kPa, psi, mbar, mmHg).
• Select the unit appropriate for your application.

4.4. Data Hold, Min/Max/Avg Functions

• ŻOMM: Agħfas il- ŻOMM buttuna biex tiffriża l-qari attwali fuq id-displej. Agħfas mill-ġdid biex tirrilaxxa.
• MIN/MASS/MEDJA: Agħfas il- REC MAX/MIN button to enter recording mode. Subsequent presses will cycle through Minimum, Maximum, and Average readings captured since entering the mode. Press and hold to exit recording mode.

4.5. Kejl tat-Temperatura

The EM720 also provides ambient temperature measurement, displayed alongside pressure readings. This feature aids in understanding environmental conditions that may affect pressure readings.

5. Manutenzjoni

5.1. Tindif

• Wipe the instrument's exterior with a damp drapp u deterġent ħafif. Tużax tindif jew solventi li joborxu.
• Ensure no moisture enters the pressure ports or other openings.

5.2. Ħażna

• Store the EM720SPKIT in its soft carrying case when not in use to protect it from dust, dirt, and physical damage.
• Aħżen f'post frisk u niexef, 'il bogħod mid-dawl tax-xemx dirett u temperaturi estremi.
• Remove batteries if storing for extended periods to prevent battery leakage and potential damage to the instrument.

5.3. Kalibrazzjoni

For continued accuracy, it is recommended to have the EM720 manometer calibrated periodically by a qualified service center. Refer to UEi Test Instruments' official website or contact customer support for calibration services and recommended intervals.

6 Issolvi l-problemi

If the problem persists after attempting these solutions, please contact UEi Test Instruments customer support.

7. Speċifikazzjonijiet

8. Informazzjoni dwar Garanzija

UEi Test Instruments products are designed for reliability and performance. For specific warranty terms and conditions applicable to the EM720SPKIT, please refer to the warranty card included with your product or visit the official UEi Test Instruments websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

9. Appoġġ għall-Klijent

For technical assistance, troubleshooting, or service inquiries, please contact UEi Test Instruments customer support:

• Websit: Żur l-uffiċjal Ħanut tal-Istrumenti tat-Test tal-UEi ​​fuq Amazon jew il-kumpanija tagħhom websit għal FAQs, dokumentazzjoni tal-prodott, u informazzjoni ta' kuntatt.
• Telefon/Email: Irreferi għad-dettalji ta' kuntatt ipprovduti fl-imballaġġ tal-prodott tiegħek jew fuq il-fuljett uffiċjali websit.

When contacting support, please have your product model number (EM720SPKIT) and purchase date available.