XPG COREREACTORII850G-BKCUS

XPG Core Reactor II 850W Modular Power Supply User Manual

Comprehensive guide for installation, operation, and maintenance of your XPG Core Reactor II 850W Power Supply.

1. Introduzzjoni

The XPG Core Reactor II 850W Modular Power Supply is engineered to deliver stable and efficient power to your computing system. Compliant with the Intel ATX 3.0 design guide and featuring an 80 PLUS Gold certification, this power supply ensures reliable performance for a wide range of PC builds. Its fully modular design simplifies cable management, contributing to a cleaner and more organized internal setup.

Angolat view of the XPG Core Reactor II 850W Power Supply, showcasing its black chassis and fan grill.

Figure 1: XPG Core Reactor II 850W Power Supply

2. Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tal-prodott tiegħek:

  • XPG Core Reactor II 850W Modular Power Supply Unit
  • Sett ta' Kejbils Modulari (inkluż kejbil 12VHPWR)
  • Kurdun tal-Enerġija AC
  • Viti tal-Immuntar
  • Manwal għall-Utent (dan id-dokument)

Vidjo 1: Fuqview of the XPG Core Reactor II Power Supply and its included components.

3. Karatteristiċi

  • Intel ATX 3.0 Design Guide Compliant: Equipped with a 12VHPWR (12+4) Connector for next-generation GPUs.
  • Certified GOLD Efficiency: Achieves high efficiency ratings by both 80 PLUS and Cybenetics, reducing energy waste and heat generation.
  • Premium Japanese Capacitors: Utilizes 100% Japanese 105℃ Capacitors for enhanced stability and long-term reliability.
  • Fann tal-Bearings Fluwidi Dinamiċi (FDB): Features an FDB fan with intelligent fan control for quiet operation and efficient cooling.
  • Available in Multiple Wattages: Models available in 1200W, 1000W, 850W, 750W, and 650W to suit various system requirements.
Diagram illustrating the ATX 3.0 PSU with 12VHPWR connector, highlighting compatibility for various PCI-E configurations.

Figure 2: ATX 3.0 and 12VHPWR Connector Details

Close-up view of Japanese 105°C capacitors within the power supply, emphasizing component quality.

Figure 3: Japanese 105°C Capacitors

4. Speċifikazzjonijiet

AttributValur
Isem tal-MudellCOREREACTORII850G-BKCUS
Output Wattage850 watt
Fattur tal-FormolaATX
Ċertifikazzjoni tal-Effiċjenza80 PLUS Gold, Cybenetics Gold
Metodu tat-tkessiħAir (FDB Fan)
Dimensjonijiet tal-Prodott (L x W x H)5.51 x 5.91 x 3.35 pulzieri (140 x 150 x 86 mm)
Piż tal-oġġett3.5 libbra (1.59 Kilogrammi)
Apparati KompatibbliPC Components (Motherboard, CPU, GPU, Storage)
Table detailing connector types, cable lengths, and quantities for various XPG Core Reactor II PSU wattagmudelli e.

Figure 4: Cable Configuration for Core Reactor II Series

5. Setup

Follow these steps to properly install your XPG Core Reactor II 850W Power Supply:

  1. Ipprepara s-Sistema Tiegħek: Ensure your computer is powered off and unplugged from the wall. Open your PC case to access the power supply mounting area.
  2. Immonta l-PSU: Secure the XPG Core Reactor II PSU into the designated power supply bay in your PC case using the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow (typically facing downwards or towards an intake vent).
  3. Qabbad il-Kejbils Essenzjali:
    • 24-Pin ATX Motherboard Cable: Connect the large 24-pin cable from the PSU to the corresponding port on your motherboard.
    • Kejbils tal-Enerġija tas-CPU: Connect the 4+4-pin or 8-pin CPU power cables to the CPU power headers on your motherboard. Modern motherboards may require two such connections.
    • Kejbils tal-Enerġija tal-GPU: For graphics cards requiring a 12VHPWR connector, use the dedicated 12VHPWR (12+4) cable. For other GPUs, use the appropriate 6+2-pin PCI-E cables. Ensure all connections are fully seated.
    • Kejbils SATA/Molex: Qabbad il-kejbils tal-enerġija SATA mad-drajvs tal-ħażna tiegħek (SSDs, HDDs) u l-kejbils Molex ma' kwalunkwe periferali ieħor li jeħtieġhom.
  4. Ġestjoni tal-Kejbil: Utilize the fully modular design to connect only the necessary cables, improving airflow and aesthetics within your case. Route cables neatly to prevent obstruction.
  5. Kontroll Finali: Iċċekkja l-konnessjonijiet kollha darbtejn biex tiżgura li huma siguri. Agħlaq il-kaxxa tal-PC tiegħek.
Close-up view of the modular cable ports on the XPG Core Reactor II 850W Power Supply, clearly labeled for Motherboard, CPU & VGA, 12VHPWR, and SATA & Molex connections.

Figure 5: Modular Cable Ports

Ġenb view of the XPG Core Reactor II 850W Power Supply, showing the modular cable connection panel.

Figura 6: Ġenb View of Modular Connections

6. Istruzzjonijiet Operattivi

After successful installation, connect the AC power cord to the PSU and then to a wall outlet. Flip the main power switch on the back of the PSU to the 'ON' position. You can then power on your computer as usual.

The XPG Core Reactor II features an intelligent FDB fan control. The fan operates silently at low loads and adjusts its speed dynamically to maintain optimal temperatures under heavier loads. This ensures efficient cooling without unnecessary noise.

Wara view of the XPG Core Reactor II 850W Power Supply, showing the main power switch and AC power inlet.

Figure 7: Main Power Switch and AC Inlet

7. Manutenzjoni

Biex tiżgura l-lonġevità u l-prestazzjoni ottimali tal-provvista tal-enerġija tiegħek, ikkunsidra l-pariri ta' manutenzjoni li ġejjin:

  • Żommha Nadif: Periodically clean the exterior of the power supply and its fan grill to prevent dust buildup, which can impede airflow and cooling efficiency. Use compressed air for hard-to-reach areas.
  • Żgura Ventilazzjoni xierqa: Make sure your PC case has adequate airflow and that the power supply's intake and exhaust vents are not obstructed.
  • Evita tagħbija żejda: Ensure your system's power consumption does not consistently exceed the PSU's rated wattage.

8 Issolvi l-problemi

If you encounter issues with your XPG Core Reactor II 850W Power Supply, try the following steps:

  • Ebda Qawwa:
    • Iċċekkja jekk il-korda tal-enerġija AC hijiex imqabbda sew kemm mal-PSU kif ukoll mas-sokit tal-ħajt.
    • Ensure the main power switch on the PSU is in the 'ON' position.
    • Verify that the 24-pin ATX and CPU power cables are correctly and firmly connected to the motherboard.
  • Instabbiltà tas-Sistema/Għeluq każwali:
    • Ensure all component power cables (GPU, CPU, etc.) are securely connected.
    • Confirm that your system's total power draw does not exceed the 850W capacity of the PSU. High-end components, especially GPUs, can have significant power spikes.
    • Iċċekkja jekk hemmx ventilazzjoni xierqa fil-kaxxa tal-PC tiegħek biex tevita li tissaħħan iżżejjed.
  • Storbju mhux tas-soltu:
    • If the fan is unusually loud, ensure it is not obstructed by cables or dust.
    • A slight buzzing noise under heavy load can sometimes occur with certain components; however, persistent loud or grinding noises may indicate a fan issue.

If issues persist after following these steps, please contact XPG customer support.

9. Garanzija u Appoġġ

The XPG Core Reactor II 850W Modular Power Supply comes with a 10-Sena Garanzija, li jiżgura affidabbiltà fit-tul u serħan tal-moħħ. Din il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu normali.

Għal appoġġ tekniku, talbiet għal garanzija, jew aktar assistenza, jekk jogħġbok żur is-sit uffiċjali tal-XPG webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm il-prova tax-xiri tiegħek għall-validazzjoni tal-garanzija.

Manifattur: ADATA

Numru tal-Mudell: COREREACTORII850G-BKCUS

Dokumenti Relatati - COREREACTORII850G-BKCUS

Preview XPG Core Reactor Gold Series ATX Power Supply User Manual
User manual for XPG Core Reactor Gold Series ATX power supplies (850W, 750W, 650W). Features 80 PLUS Gold efficiency, quiet operation, modular design, and comprehensive protection circuits. Includes specifications, installation, and safety information.
Preview XPG CORE REACTOR II VE Series Modular Power Supply Quick Start Guide
This guide provides quick start instructions, specifications, cable listings, protection circuit details, installation steps, troubleshooting tips, and safety information for the XPG CORE REACTOR II VE series of modular power supplies, including 850W, 750W, and 650W models.
Preview Gwida għall-Bidu Mgħaġġel tal-Provvista tal-Enerġija XPG Core Reactor II Gold Series
Dan id-dokument jipprovdi gwida ta' bidu rapidu għall-provvista tal-enerġija XPG Core Reactor II Gold Series, inklużi speċifikazzjonijiet, listi ta' kejbils, kurvi tal-effiċjenza u tal-fann, informazzjoni dwar is-sigurtà, struzzjonijiet għall-installazzjoni, issolvi l-problemi, u dettalji tal-garanzija.
Preview Xażi tal-PC XPG STARKER AIR BTF Mid-Tower: Speċifikazzjonijiet u Gwida għall-Installazzjoni
Speċifikazzjonijiet dettaljati, karatteristiċi, u gwida għall-installazzjoni għax-chassis tal-PC mid-tower XPG STARKER AIR BTF, inklużi portijiet I/O, appoġġ għall-fann, kompatibilità mar-radjatur, u effetti tad-dawl.
Preview Gwida ta' Bidu Mgħaġġel għall-Provvista tal-Enerġija XPG PROBE Bronze: Installazzjoni u Speċifikazzjonijiet
Gwida komprensiva ta' bidu rapidu għall-unitajiet tal-provvista tal-enerġija XPG PROBE Bronze (700W u 600W). Tinkludi passi ta' installazzjoni, pariri għas-soluzzjoni tal-problemi, informazzjoni dwar il-garanzija, u speċifikazzjonijiet tekniċi.
Preview Manwal tal-Utent u Speċifikazzjonijiet tax-Chassis Kompatt ta' Torri Nofsani XPG VALOR AIR
Gwida dettaljata għall-ispeċifikazzjonijiet, id-dimensjonijiet, il-kompatibilità, u l-installazzjoni għax-chassis kompatt tal-PC mid-tower XPG VALOR AIR. Tinkludi struzzjonijiet dwar it-tindif u s-sigurtà, informazzjoni dwar il-garanzija, u appoġġ multilingwi.