Manwal tal-Utent tal-Kit ta' Konverżjoni tar-Rota Elettrika PEXMOR

Introduzzjoni

This user manual provides detailed instructions for the installation, operation, and maintenance of your PEXMOR 48V 1200W 26" Electric Bike Conversion Kit. Please read this manual thoroughly before beginning installation to ensure proper setup and safe operation. This kit is designed to transform a standard bicycle into a powerful electric bike, offering enhanced riding experiences with pedal assist and throttle control.

Istruzzjonijiet tas-Sigurtà

Dejjem ilbes elmu u tagħmir tas-sigurtà xieraq meta tkun qed issuq.
Ensure all connections are secure and components are properly installed before each ride.
Do not operate the kit in wet conditions or extreme weather.
Familiarize yourself with local e-bike regulations and traffic laws.
Regularly inspect tires, brakes, and electrical connections for wear or damage.
Evita tampering with the motor or controller as this may void the warranty and pose safety risks.
Keep hands and clothing clear of moving parts, especially the motor wheel and chain.

Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:

Complete PEXMOR Electric Bike Conversion Kit components laid out

Figure 1: Complete Conversion Kit Components. Battery not included.

Hub Motor Wheel (Front or Rear, 26 inch)
Display LCD
Sensor ta' Assistenza għall-Pedali (PAS)
Twist Throttle
Kaxxa tat-Terminal
Borża tal-batterija
Kontrollur
Irbit tal-kejbil
Lievi tal-brejkijiet
Qoxra tal-Cable
Korda tal-Enerġija tat-Trasferiment
Arm tat-torque
Borża tal-Kontrollur
Manwal għall-Utent

Gwida għall-Installazzjoni

1. Pre-installation Preparation

Before starting, ensure you have all necessary tools and a stable work area. Place your bicycle upside down for easier access to the wheels and bottom bracket.

Video 1: Step1 Pre-installation Preparation and Checks. This video demonstrates preparing your bike for the conversion kit installation, including positioning the bike and gathering tools.

It is crucial to have a clean and organized workspace to prevent loss of small parts and ensure a smooth installation process.

2. Motor Wheel Removal and Replacement

Carefully remove the existing front wheel from your bicycle. You will need to loosen the axle nuts and detach any brake components if applicable. Once removed, take out the tire and inner tube from the original wheel.

PEXMOR Electric Bike Conversion Kit with motor wheel and components

Figure 2: The main components of the conversion kit, including the motor wheel.

Video 2: Removal and Replacement of Motor Wheel. This video illustrates the process of removing your bike's original wheel and preparing the new motor wheel for installation.

Transfer the tire and inner tube to the new motor wheel. Ensure the tire is properly seated on the rim before inflating. Inflate the tire to the recommended pressure as indicated on the tire sidewall.

3. Handlebar Component Installation (Brake Lever, Throttle, LCD Display)

Replace the original throttle with the new twist throttle provided in the kit. Tighten the screw on the throttle to secure it. Install the LCD display on the handlebar in a position that is easily visible and accessible during riding. If your handlebar is thin, use the provided belt to adjust the display securely.

Smart LCD Display showing battery level, speed, distance, power, and PAS level

Figure 3: Smart LCD Display for monitoring riding information.

The kit includes new brake levers. You can choose to replace your original brake levers with these, or retain your existing ones if they are compatible and functional. Ensure the brake levers are properly aligned and secured for effective braking.

4. PAS (Pedal Assist System) Installation

To install the PAS, you will need to loosen the pedal shaft screw and remove the dental disc. Install the PAS sensor, ensuring the arrow direction on the magnetic disc points to the forward direction of pedaling. Make sure the magnetic disc rotates freely with the shaft. Reinstall the dental disc and foot pedal, tightening all screws securely.

Figure 4: Pedal Assist System (PAS) sensor for various riding modes.

Video 3: Step 4 Installation and Precaution of PAS. This video guides you through the installation of the Pedal Assist System.

5. Controller Connection and Fixation

Connect the controller to all corresponding accessories: throttle, PAS, brake levers, and display. Ensure all plugs are inserted tightly. The red, black, and green cables connect to the throttle. The red, white, and black cables connect to the PAS. The yellow, green, black, blue, and red cables connect to the display. The two blue cables on the controller are for speed limit; leave them alone if you want full speed. After fixing all connections, connect the battery to the controller to power the system.

PEXMOR Electric Bike Conversion Kit Controller with various wire connections

Figure 5: The controller and its various connections for the e-bike system.

Video 4: Step3 Electrical Control System Connection and Check. This video details how to connect and check the electrical components of the kit.

After all connections are made, turn on the battery switch. Long press the "M" button on the display to turn it on. Test the throttle and check the motor's response. Also, check the brake levers to ensure they cut power to the motor when engaged. Verify the PAS is working correctly by checking its response in Gear "1" (it will not work in Gear "0"). Unplug all connections and turn off the battery after testing.

Istruzzjonijiet Operattivi

1. Modi ta 'Rkib

The PEXMOR Electric Bike Conversion Kit offers four riding modes:

Modalità Throttle: Provides power on demand via the twist throttle, allowing you to ride without pedaling.
Modalità PAS (Sistema ta' Assistenza bil-Pedali): The motor provides assistance as you pedal, making riding easier, especially on inclines or long distances. The PAS will work in Gear "1" and higher, but not in Gear "0".
Modalità Manwali: Ride the bike like a traditional bicycle, using only pedal power.
Modalità tal-Presets: Uża livelli ta' qawwa stabbiliti minn qabel għal assistenza konsistenti.

Person riding an electric bike with 4 riding modes listed: Throttle, PAS, Manual, Presets

Figure 6: Illustration of the four available riding modes.

2. Funzjonijiet tal-Wiri LCD

Id-displej LCD jipprovdi informazzjoni essenzjali dwar is-sewqan f'daqqa t'għajn:

Livell tal-batterija: Juri l-bqija tal-batterija.
Veloċità: Juri l-veloċità attwali tas-sewqan.
Distanza: Tracks trip distance or total odometer.
Qawwa: Indicates real-time power output.
Livell PAS: Shows the current pedal assist level (0-5).

Use the buttons on the display to navigate through different information screens and adjust settings as needed.

Manutenzjoni

Regular maintenance ensures the longevity and safe operation of your e-bike conversion kit:

Tajers: Check tire pressure regularly and inflate to recommended PSI. Inspect for wear and punctures.
Brejkijiet: Ensure brake levers are responsive and brake pads are not excessively worn. Adjust as needed.
Konnessjonijiet elettriċi: Periodically check all electrical connections for tightness and signs of corrosion or damage.
Motor & Controller: Keep the motor and controller clean and free from debris. Avoid exposing them to excessive moisture.
Chain & Drivetrain: Lubricate the chain regularly and keep the drivetrain components clean for smooth operation.
Spokes: Regularly check spoke tension. Loose spokes can lead to wheel damage, as noted in some user experiences.

Issolvi l-problemi

If you encounter issues with your PEXMOR Electric Bike Conversion Kit, refer to the following common problems and solutions:

Problema	Kawża Possibbli	Soluzzjoni
Motor not working / Display not turning on	Loose electrical connections, faulty controller, battery not connected or charged.	Check all cable connections (motor, controller, display, battery). Ensure battery is charged and switched on. If issues persist, contact customer support.
PAS not providing assistance	PAS sensor misaligned, PAS level set to 0, faulty PAS sensor.	Ensure PAS sensor is correctly installed and aligned. Check display to confirm PAS level is not 0. Test PAS sensor functionality.
Loose spokes / Wheel wobbling	Improper spoke tension, wear and tear.	Regularly check and tighten spokes with a spoke wrench. If spokes are broken, replace them and re-tension the wheel. Professional assistance may be required.
Brake lever not cutting motor power	Brake lever sensor not connected or faulty.	Verify brake lever connections to the controller. Ensure the brake lever returns to its original position when released.

Speċifikazzjonijiet

Karatteristika	Dettall
Tip ta' Bike	Electric Bike (Conversion Kit)
Brand	PEXMOR
Qawwa tal-Mutur	48V 1200W Brushless Hub Mutur
Daqs tar-rota	26 Pulzier
Materjal tal-qafas	Aluminum (for compatible bikes)
Veloċità Massima	Sa 36.6 mph (59 km/h)
Tip ta' Kontrollur	Aġġorna l-Kontrollur tal-Mewġa Sinusoidali bi 3 Modi
Modi ta' Riding	Throttle, PAS, Manwal, Presets
Wiri	Smart LCD Display (Battery, Speed, Distance, PAS Level)
Rakkomandazzjoni tal-Piż Massimu	242 lbs
UPC	810158426917

Garanzija u Appoġġ

PEXMOR offers a limited warranty on this Electric Bike Conversion Kit. For specific warranty terms and conditions, please refer to the warranty card included in your package or contact PEXMOR customer service. If you encounter any issues during installation or operation, or require technical assistance, please contact PEXMOR support through the vendor's contact information provided with your purchase or on their official website. Please have your model number (26EbikeKit1200-Fro88) and purchase details ready when contacting support.

	Manwal tal-Utent tar-Rota Elettrika Pexmor: Assemblaġġ, Tħaddim, u Manutenzjoni Manwal komprensiv għall-utent għar-rota elettrika Pexmor, li jkopri struzzjonijiet dwar l-assemblaġġ, tħaddim tal-istrument LCD, pariri dwar il-manutenzjoni, informazzjoni dwar il-garanzija, u FAQs dwar is-soluzzjoni tal-problemi.
	Manwal tal-Utent tar-Roti Elettriċi Pexmor Manwal komprensiv għall-utent għar-Rota Elettrika Pexmor, li jkopri informazzjoni dwar is-sigurtà, speċifikazzjonijiet, struzzjonijiet tal-assemblaġġ, manutenzjoni, użu tal-istrument LCD, garanzija, u s-soluzzjoni tal-problemi.
	Manwal tal-Utent u Gwida tal-Assemblaġġ tar-Rota Elettrika Pexmor Manwal komprensiv għall-utent għar-rota elettrika Pexmor, li jkopri l-assemblaġġ, l-ispeċifikazzjonijiet, il-manutenzjoni, l-użu tal-istrument LCD, il-garanzija, u s-soluzzjoni tal-problemi. Tgħallem kif tissettja u tħaddem ir-rota elettrika tiegħek ta' 750W, 48V.
	Manwal tal-Utent tar-Rota Elettrika PEXMOR Manwal komprensiv għall-utent għar-rota elettrika PEXMOR, li jkopri l-linji gwida tas-sigurtà, l-ispeċifikazzjonijiet, il-lista tal-partijiet, l-istruzzjonijiet tal-assemblaġġ, il-proċeduri tal-manutenzjoni, it-tħaddim tal-istrument LCD, informazzjoni dwar il-garanzija, u mistoqsijiet frekwenti.
	Manwal tal-Utent tar-Rota Elettrika Pexmor: Gwida għall-Assemblaġġ, it-Tħaddim, u l-Manutenzjoni Manwal komprensiv għall-utent għar-rota elettrika Pexmor, li jkopri struzzjonijiet tal-assemblaġġ, modi ta' tħaddim dettaljati, pariri dwar il-manutenzjoni, speċifikazzjonijiet, informazzjoni dwar il-garanzija, u mistoqsijiet frekwenti.
	Manwal tal-Utent tar-Roti Elettriċi Pexmor Manwal tal-utent għar-Rota Elettrika Pexmor, li jkopri l-assemblaġġ, l-ispeċifikazzjonijiet, il-manutenzjoni, l-użu tal-istrument LCD, il-garanzija, u l-FAQs.

PEXMOR 26EbikeKit1200-Fro88