Introduzzjoni
This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your KoolMore KM-RPPS-3DSS Commercial Pizza Prep Table. Please read this manual thoroughly before installation and use, and retain it for future reference. This unit is designed for commercial food preparation and storage, featuring a refrigerated topping station, a built-in cutting board, and cold storage beneath.
Informazzjoni dwar is-Sigurtà
Dejjem segwi l-prekawzjonijiet bażiċi ta’ sigurtà meta tuża dan l-apparat biex tnaqqas ir-riskju ta’ nar, xokk elettriku, jew korriment.
- Kun żgur li l-unità tkun ertjata kif suppost.
- Tħaddimx b'korda tal-enerġija jew plagg bil-ħsara.
- Żomm il-fetħiet tal-ventilazzjoni mingħajr ostakli.
- Taħżinx sustanzi splussivi bħal bottijiet aerosol bi propellant li jaqbad f'dan l-apparat.
- Il-persunal kwalifikat biss għandu jwettaq tiswijiet.
- This appliance uses R290 refrigerant. Handle with care and ensure proper ventilation during servicing.
Setup u Installazzjoni
Spakkjar
Carefully remove all packaging materials. Inspect the unit for any shipping damage. Report any damage immediately to the carrier and supplier. Retain packaging materials for inspection.
Pjazzament
- Place the unit on a strong, level surface capable of supporting its weight (approximately 565 lbs).
- Ensure adequate clearance around the unit for proper ventilation, especially around the compressor compartment.
- Evita x-xemx diretta jew il-viċinanza ta' tagħmir li jiġġenera s-sħana.
- The unit is equipped with rolling casters for easy positioning. Lock the casters once the unit is in its final location.
Konnessjoni elettrika
Connect the unit to a dedicated 120 Volt, 60 Hz, single-phase grounded electrical outlet. Do not use extension cords or adapter plugs. Ensure the electrical supply matches the requirements specified on the unit's data plate.
Tindif Inizjali
Before initial use, clean the interior and exterior surfaces with a mild soap and water solution. Rinse thoroughly and dry. Install the included shelves.
Immaġni: Quddiem view of the KoolMore KM-RPPS-3DSS pizza prep table with food pans in the topping station and items on the cutting board.
Immaġni: Quddiem view of the KoolMore KM-RPPS-3DSS pizza prep table with the food protection lids closed.
Istruzzjonijiet Operattivi
Tixgħel
After installation and initial cleaning, plug in the unit. The digital temperature controller will display the current internal temperature. Allow the unit to run for several hours to reach the desired operating temperature before loading with food products.
Kontroll tat-Temperatura
The unit is designed to maintain temperatures between 33°F and 40°F (0.5°C and 4.4°C). Adjust the temperature using the digital controller located on the front of the unit. Refer to the controller's specific instructions for detailed programming.
Food Pan Usage
The top rail accommodates up to twelve food pans (sold separately). Place prepared ingredients in these pans for easy access during food preparation. Ensure the food protection lids are closed when the pans are not actively in use to maintain cold temperatures and food safety.
Immaġni: Close-up view of the food pan section of the KoolMore KM-RPPS-3DSS pizza prep table, showing various ingredients.
Bord tat-tqattigħ
Utilize the integrated 92-inch cutting board for food preparation tasks. Keep the cutting board clean and sanitized between uses to prevent cross-contamination.
Ħażna Refriġerata
The three-door refrigerated compartment below the work surface provides additional cold storage. Organize items on the adjustable wire shelves. Ensure doors are closed securely after each access to maintain internal temperatures.
Immaġni: Intern view of the KoolMore KM-RPPS-3DSS pizza prep table with all three doors open, revealing the wire shelves inside.
Manutenzjoni
Tindif ta 'Kuljum
- Clean the cutting board and food pan area with a food-safe cleaner and sanitizer.
- Imsaħ l-uċuħ kollha tal-istainless steel b'reklamaramp cloth and mild detergent. Dry thoroughly to prevent water spots.
Weekly/Monthly Cleaning
- Clean the interior of the refrigerated compartments, including shelves.
- Inspect door gaskets for tears or damage and clean them to ensure a proper seal.
- Clean the condenser coil (located in the compressor compartment) to ensure efficient operation. This should be done by qualified personnel or by following specific instructions in a more detailed service manual. A dirty condenser coil can lead to increased energy consumption and reduced cooling performance.
Sistema ta 'Defrost
This unit features an automatic defrost system. Ice buildup on the evaporator coil will be periodically melted and drained. Ensure the drain line is clear and free of obstructions.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-unità ma tkessaħx |
|
|
| Storbju eċċessiv |
|
|
| Ilma fuq l-art |
|
|
For issues not listed or if troubleshooting steps do not resolve the problem, contact KoolMore customer support or a qualified service technician.
Speċifikazzjonijiet
| Numru tal-Mudell | KM-RPPS-3DSS |
| Dimensjonijiet (D x W x H) | 31.49 x 91.88 x 39.44 pulzieri |
| Piż tal-oġġett | 565 liri |
| Kapaċità | 24 Piedi kubi |
| Voltage | 120 Volts |
| Konsum Annwali tal-Enerġija | 625 Kilowatt Siegħa |
| Firxa tat-Temperatura | 33°F - 40°F |
| Refriġerant | R-290 |
| Sistema ta 'Defrost | Awtomatiku |
| Numru ta' Bibien | 3 |
| Xkafef | 3 (Wajer) |
| Tip ta' Materjal | Stainless Steel |
| Ċertifikazzjoni | ETL Elenkat |
Image: Diagram showing the dimensions of the KoolMore KM-RPPS-3DSS pizza prep table.
Garanzija u Appoġġ
For warranty information, please refer to the documentation provided with your purchase or visit the official KoolMore website. For technical support, parts, or service inquiries, please contact KoolMore customer service. Ensure you have your model number (KM-RPPS-3DSS) and purchase date available when contacting support.
KoolMore Customer Service: www.koolmore.com/support (Eżampil-link, il-link attwali jista' jvarja)
