Manwal tal-Istruzzjonijiet tal-Estensur Wi-Fi Ruijie Reyee RG-EW1200R / RAP1261

1. Prodott Aktarview

The Ruijie Reyee RG-EW1200R, also known as RAP1261, is an AX3000 Wi-Fi 6 dual-band Gigabit in-wall Access Point (AP) designed to extend and enhance wireless network coverage. It features built-in antennas and supports both 2.4GHz (300Mbps) and 5GHz (867Mbps) dual-radio frequencies, adhering to 802.11a/b/g/n/ac Wave1/Wave2/ax protocols. This device includes a 10/100/1000 Base-T port and supports both AP and routing modes, along with layer 2 and layer 3 roaming capabilities. Management is facilitated through Reyee unified networking and the Ruijie Cloud app.

The unit is designed for wall-mounted installation and supports 802.3at Power over Ethernet (PoE) input, with a maximum power consumption of less than 18W. When using a non-standard PoE adapter, it is essential to configure the "PoE settings" to "IEEE 802.3at" via the device's web interface to ensure proper operation.

2. Setup u Installazzjoni

This section outlines the general steps for installing and setting up your Ruijie Reyee RAP1261 in-wall AP. Professional installation by a qualified technician is recommended due to the in-wall nature of the device and its power requirements.

2.1 Tneħħija tal-kaxxa u l-komponenti

Ivverifika li l-komponenti kollha huma preżenti fil-pakkett:

• Ruijie Reyee RAP1261 In-wall AP unit
• Mounting hardware (if included, typically for in-wall installation)
• Gwida ta' Bidu Mgħaġġel (irreferi għal dan il-manwal għal struzzjonijiet dettaljati)

2.2 Installazzjoni Fiżika

The RAP1261 is designed for in-wall installation. This typically involves:

1. Power Source Preparation: Ensure a suitable 802.3at PoE-enabled network switch or injector is available to provide power to the AP. The power supply output must exceed the AP's maximum power consumption of 18W.
2. Immuntar tal-ħajt: Carefully follow the provided mounting instructions to secure the AP within a standard wall outlet box.
3. Konnessjoni tan-Netwerk: Connect an Ethernet cable from your PoE source to the WAN/PoE port on the back of the RAP1261.

Figura 1: Wara view of the Ruijie Reyee RAP1261 In-wall AP. This image displays the back panel of the device, highlighting the WAN/PoE Ethernet port for network and power connection, and the mounting tabs for in-wall installation. A label area is also visible at the bottom.

2.3 Konfigurazzjoni Inizjali

After physical installation and power-up:

• Qawwa Mixgħul: The device will power on automatically when connected to a PoE source. Observe the LED indicators for status.
• Aċċess għan-Netwerk: Connect a device (e.g., laptop, smartphone) to the default Wi-Fi network broadcast by the AP (SSID and password typically found on a label on the device or in the quick start guide).
• Web Aċċess għall-Interfaċċja: Iftaħ a web browser and navigate to the default IP address of the AP (e.g., 192.168.1.1 or similar, refer to the quick start guide). Log in using the default credentials.
• PoE Settings (if applicable): If using a non-standard PoE adapter, navigate to the "PoE settings" in the web interface and set the "PoE mode" to "IEEE 802.3at".
• Basic Wi-Fi Configuration: Configure your desired Wi-Fi network name (SSID), password, and security settings for both 2.4GHz and 5GHz bands.
• Modalità Operattiva: Select between AP mode or routing mode based on your network requirements.
• Ġestjoni tal-App: Download the Ruijie Cloud app or Reyee Router App from your device's app store. Follow the in-app instructions to add and manage your RAP1261.

3. Istruzzjonijiet Operattivi

The Ruijie Reyee RAP1261 offers various functionalities to optimize your wireless network.

3.1 Konnettività tal-Wi-Fi

• Operazzjoni ta' Faxxa Doppja: The AP broadcasts Wi-Fi on both 2.4GHz and 5GHz frequencies. Connect your devices to the appropriate band for optimal performance. The 5GHz band offers higher speeds but shorter range, while 2.4GHz provides wider coverage.
• Mesh Functionality: If deployed as part of a Reyee Mesh network, the AP will seamlessly integrate to provide extended and unified Wi-Fi coverage.

3.2 Management via Reyee App / Ruijie Cloud

The dedicated mobile application provides comprehensive control over your AP:

• Monitoraġġ tan-Netwerk: View connected devices, network traffic, and AP status.
• Configuration Changes: Modify Wi-Fi settings, operating modes, and other network parameters.
• Aġġornamenti tal-Firmware: Check for and apply the latest firmware to ensure optimal performance and security.
• Kontroll tal-LED: Adjust or disable the LED indicators on the device for discreet operation.

3.3 Karatteristiċi Avvanzati

Depending on your configuration and network setup, the RAP1261 supports:

• Modalità AP: Functions as a wireless access point, extending an existing wired network wirelessly.
• Modalità tar-Rottaġġ: Can act as a basic router for smaller networks.
• Layer 2 and Layer 3 Roaming: Facilitates seamless transitions for wireless clients between multiple APs in a larger network.

4. Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your Ruijie Reyee RAP1261.

• Żomm Nadif: Gently wipe the exterior of the device with a soft, dry cloth. Avoid using liquid cleaners or aerosols.
• Aġġornamenti tal-Firmware: Periodically check for and install firmware updates via the Ruijie Cloud app or web interface. L-aġġornamenti tal-firmware spiss jinkludu titjib fil-prestazzjoni, irqajja tas-sigurtà, u karatteristiċi ġodda.
• Kundizzjonijiet Ambjentali: Ensure the device is operating within its specified temperature and humidity ranges to prevent overheating or damage.

5 Issolvi l-problemi

This section addresses common issues you might encounter with your RAP1261.

5.1 Bla Qawwa / L-Apparat Mhux Mixgħul

• Iċċekkja l-Konnessjoni PoE: Ensure the Ethernet cable is securely connected to the WAN/PoE port and to a functioning 802.3at PoE source.
• Ivverifika s-Sors tal-PoE: Confirm that your PoE switch or injector is powered on and providing sufficient power (output > 18W).
• Non-Standard PoE: If using a non-standard PoE adapter, ensure the "PoE mode" is set to "IEEE 802.3at" in the device's web interface.

5.2 No Wi-Fi Signal or Connectivity Issues

• Iċċekkja l-Indikaturi LED: Refer to the device's LED status lights (if visible) to determine its operational state. Consult the quick start guide for LED meanings.
• Ivverifika l-Konfigurazzjoni: Idħol fil- web interface or Ruijie Cloud app to ensure Wi-Fi settings (SSID, password, security type) are correctly configured and enabled.
• Irristartja l-Apparat: Power cycle the AP by disconnecting and reconnecting the PoE cable.
• Interferenza: Ensure there are no major sources of interference (e.g., microwaves, cordless phones) near the AP.

5.3 Veloċità baxxa tal-Wi-Fi

• Għażla tal-Banda: Ensure high-bandwidth devices are connected to the 5GHz band if possible.
• Interferenza tal-Kanal: Use the Ruijie Cloud app or web interface to perform a channel scan and select less congested Wi-Fi channels.
• Firmware: Ensure the AP has the latest firmware installed.
• Network Load: Check if other devices on your network are consuming significant bandwidth.

5.4 Ma nistax naċċessa Web Interface or App

• Indirizz IP: Confirm you are using the correct IP address for the AP. If the AP is in routing mode, its IP might be different from the default.
• Konnessjoni tan-Netwerk: Ensure your device is connected to the AP's network (either wired or wirelessly).
• Firewall/Antivirus: Iddiżattiva temporanjament kwalunkwe firewall jew softwer antivirus fuq il-kompjuter tiegħek li jista' jkun qed jimblokka l-aċċess.
• Irrisettja: As a last resort, perform a factory reset (refer to the quick start guide for the reset procedure). This will revert all settings to default.

6. Speċifikazzjonijiet

7. Garanzija u Appoġġ

For warranty information, please refer to the documentation provided with your purchase or contact your reseller. Support resources, including FAQs and further technical assistance, may be available through the Ruijie official website or the Reyee Cloud app.