1. Introduzzjoni
Thank you for choosing the TRUSTECH 26-inch Tower Space Heater. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your new heater. Please read this manual thoroughly before use and retain it for future reference. Adhering to these instructions will ensure safe and efficient performance of the appliance.
2. Informazzjoni Importanti dwar is-Sigurtà
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury. This heater is designed for indoor use only.
- Pjazzament: Position the heater on a firm, level surface. Maintain a minimum distance of 3 feet (0.9 meters) from walls, furniture, curtains, and other combustible materials.
- Provvista tal-Enerġija: Ensure the heater is connected to a grounded 120V AC, 60Hz outlet. Do not use extension cords or power strips.
- Ventilazzjoni: Do not block air inlets or outlets. Ensure proper airflow around the heater.
- Superviżjoni: Do not leave the heater unattended while in operation. Keep children and pets away from the heater.
- Umdità: Tużax il-heater fl-imxarrab jew damp postijiet, bħal kmamar tal-banju jew żoni tal-ħasil tal-ħwejjeġ.
- Protezzjoni mis-sħana żejda: The heater is equipped with an automatic overheat protection system. If the heater overheats, it will shut off automatically. Unplug the heater, allow it to cool for 30 minutes, then plug it back in.
- Protezzjoni kontra l-qlib: The heater includes a safety switch that automatically turns off the unit if it is accidentally tipped over. Place the heater upright on a stable surface to resume operation.
- Materjal Ritardant tal-Fjammi: Constructed with V0 flame-retardant materials for enhanced safety.
- Ċertifikat ETL: This product is ETL listed, indicating compliance with North American safety standards.
3. Kontenut tal-Pakkett
- TRUSTECH 26-inch Tower Space Heater (Model KPT-1607F)
- Remote Control (with 1 Lithium Metal battery included)
- Manwal għall-Utent
4. Prodott Aktarview
Familiarize yourself with the components of your TRUSTECH Tower Space Heater.
Control Panel & Remote Functions
- Buttuna mixgħul/mitfi: Jixgħel jew jitfi l-unità.
- Buttuna tal-Modalità: Cycles through heating modes (High, Low, Eco).
- Thermostat Buttons (+/-): Jaġġusta t-temperatura mixtieqa.
- Buttuna ta 'oxxillazzjoni: Jattiva jew jiddiżattiva l-funzjoni tal-oxxillazzjoni ta' 60°.
- Buttuna tat-Tajmer: Sets the auto-off timer (1-12 hours).
- Buttuna tal-Fjamma: Controls the 3D flame effect.
5. Setup
- Ippakkja: Neħħi l-ħiter u l-materjali kollha tal-ippakkjar mill-kaxxa bir-reqqa.
- Pjazzament: Place the heater on a stable, level, and heat-resistant surface. Ensure it is at least 3 feet (0.9 meters) away from any walls, furniture, or flammable objects.
- Konnessjoni tal-Enerġija: Plug the heater directly into a standard 120V AC, 60Hz electrical outlet. Do not use extension cords or surge protectors.
- Batterija tal-Kontroll mill-bogħod: The remote control comes with a pre-installed Lithium Metal battery. If needed, replace with a CR2025 battery.
6. Istruzzjonijiet Operattivi
Qawwa mixgħul/mitfi
Agħfas il- Mixgħul/Mitfi button on the control panel or remote control to turn the heater on or off.
Modi tat-Tisħin
Agħfas il- Modalità button to cycle through the available heating settings:
- Għoli (1500W): Provides maximum heat output for rapid warming.
- Baxx (1000W): Provides moderate heat output.
- Modalità Eko: Automatically adjusts heating power (1500W/1000W) to maintain the set temperature, optimizing energy consumption.
Kontroll tat-termostat
In Eco Mode, use the + or - buttons to set your desired temperature between 41°F and 95°F (5°C and 35°C) in 1°F increments. The heater will automatically turn on or off to maintain this temperature.
Funzjoni ta 'Oxxillazzjoni
Agħfas il- Oscilazzjoni button to activate the 60° wide-angle oscillation, distributing heat evenly across the room. Press again to stop oscillation.
Funzjoni Timer
Agħfas il- Timer button to set an auto-off timer from 1 to 12 hours. Each press increases the timer by one hour. The heater will automatically shut off once the set time expires.
Effett tal-Fjammi 3D
Agħfas il- Fjammi button to turn the decorative 3D flame effect on or off. This feature operates independently of the heating function and can serve as a night light.
Użu tal-Kontroll mill-bogħod
The remote control allows for convenient operation from a distance. Point the remote directly at the heater's display panel. Ensure there are no obstructions between the remote and the heater.
7. Manutenzjoni
Regular cleaning and proper storage will help prolong the life of your heater.
Tindif
- Dejjem aqla’ l-heater u ħallih jiksaħ kompletament qabel ma tnaddfu.
- Uża artab, damp drapp biex timsaħ l-uċuħ ta’ barra tal-ħiter. Tużax prodotti tat-tindif jew solventi li joborxu.
- Gently vacuum the air inlet and outlet grilles to remove dust and lint.
- Kun żgur li l-ebda ilma jew likwidi oħra ma jidħlu ġewwa l-heater.
Ħażna
Meta ma tkunx qed tuża l-ħiter, aħżenh f'post frisk u niexef. Huwa rakkomandat li taħżnu fl-imballaġġ oriġinali tiegħu biex tipproteġih mit-trab u l-ħsara.
8 Issolvi l-problemi
If you encounter issues with your heater, refer to the following table for common problems and solutions.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-heater ma jixgħelx. | No power supply; Power switch off; Tip-over switch activated; Overheat protection activated. | Check power cord connection; Ensure power outlet is functional; Turn on the main power switch; Place heater on a flat, stable surface; Unplug, wait 30 minutes, then plug back in. |
| Ebda output tas-sħana. | Low power mode selected; Thermostat set too low; Air inlets/outlets blocked. | Select a higher heating mode (1500W); Increase the thermostat setting; Clear any obstructions from air inlets/outlets. |
| L-oxxillazzjoni mhux qed taħdem. | Il-funzjoni tal-oxxillazzjoni mhix attivata. | Agħfas il-buttuna tal-Oxxillazzjoni fuq il-pannell tal-kontroll jew ir-remote. |
| Il-kontroll mill-bogħod ma jaħdimx. | Battery depleted; Obstruction between remote and heater. | Replace the remote control battery (CR2025); Ensure a clear line of sight to the heater's display. |
If the problem persists after attempting these solutions, please contact TRUSTECH customer support for assistance.
9. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | TRUSTECH |
| Numru tal-Mudell | KPT-1607F |
| Output ta 'Qawwa | 1500W / 1000W |
| Voltage | 120V AC |
| Element tat-tisħin | Ċeramika PTC |
| Kopertura tat-Tisħin | Sa 130 pied kwadru. |
| Firxa tat-termostat | 41°F - 95°F (5°C - 35°C) |
| Angolu ta 'Oxxillazzjoni | 60° |
| Timer | 1-12 Sigħat |
| Dimensjonijiet tal-Prodott | 7.87"D x 7.48"W x 27"H |
| Piż tal-oġġett | 6.61 liri |
| Karatteristiċi tas-Sigurtà | Overheat Protection, Tip-Over Protection, V0 Flame-Retardant Material, ETL Certified |
| Batterija tal-Kontroll mill-bogħod | 1 batterija tal-litju tal-metall (CR2025) |
10. Garanzija u Appoġġ
Informazzjoni dwar Garanzija
TRUSTECH provides a Garanzija ta 'sostituzzjoni ta' 12 xhur from the date of purchase for any manufacturing defects or malfunctions under normal use. Please retain your proof of purchase for warranty claims.
Appoġġ għall-Klijent
For any questions, technical assistance, or warranty claims, please contact TRUSTECH customer support. We offer:
- Quick reply within 24 hours.
- Lifetime after-sales service and technical support.
Please visit the official TRUSTECH website or refer to your purchase platform for specific contact details.
