Byron Wireless Plug-in Doorbell Set

Introduzzjoni

This manual provides instructions for the installation, operation, and maintenance of your Byron Wireless Plug-in Doorbell Set, Model DBY-22352BS. This set includes a wireless push button and a plug-in door chime, designed for convenient notification of visitors.

Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-oġġetti kollha elenkati hawn taħt huma preżenti fil-pakkett tiegħek:

• 1x Wireless Bell Push Button
• 1x Wireless Plug-in Door Chime
• 1x CR2032 Battery (for push button)
• Double-sided Tape (for mounting)
• Manwal ta 'Istruzzjoni (dan id-dokument)

Image: The Byron Wireless Plug-in Doorbell Set, showing the main chime unit on the left and the push button on the right. Both units are black with the "Byron" logo.

Karatteristiċi

• Operazzjoni bla fili: Eliminates the need for complex wiring.
• Plug-in Chime: Receiver plugs directly into a standard power outlet.
• Medda Estiża: Up to 150 meters (unobstructed) wireless operating range.
• Għażla tal-Melodija: 16 melodija li jistgħu jintgħażlu.
• Volum aġġustabbli: 5 volume levels for customized sound output.
• Reżistenza għat-temp: IP44 protection rating for the push button, suitable for outdoor use.
• Installazzjoni faċli: Includes all necessary mounting hardware.

Setup

1. Install Push Button Battery: Iftaħ il-buttuna ċasing (refer to diagrams if available in physical manual) and insert the supplied CR2032 battery, ensuring correct polarity. Close the casing b'mod sigur.
2. Mount Push Button:
   • Choose a suitable location near your door, avoiding direct metal surfaces which can interfere with the wireless signal.
   • Naddaf il-wiċċ tal-immuntar sewwa.
   • Use the provided double-sided tape to adhere the push button to the desired location.
3. Plug in Door Chime: Insert the wireless plug-in door chime into a standard electrical outlet indoors. Ensure it is within the 150-meter unobstructed range of the push button.
4. Tqabbil (jekk meħtieġ): The units are typically pre-paired from the factory. If the chime does not ring when the push button is pressed, refer to the "Troubleshooting" section or the full manual for specific pairing instructions.

Istruzzjonijiet Operattivi

1. Iddoqq il-Qanpiena tal-Bieb: Press the push button once. The plug-in chime will sound the selected melody.
2. Nibdlu l-Melodiji: Locate the melody selection button on the plug-in chime (refer to product diagrams if available). Press this button repeatedly to cycle through the 16 available melodies. The chime will play a preview of each melody as you select it.
3. Aġġusta tal-Volum: Locate the volume control button on the plug-in chime. Press this button to cycle through the 5 available volume levels (low to high).

Manutenzjoni

• Tindif: Imsaħ l-unitajiet tal-qanpiena tal-bieb b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.
• Battery Replacement (Push Button): When the push button's signal weakens or stops working, replace the CR2032 battery. Open the casing, remove the old battery, and insert a new one with the correct polarity. Dispose of old batteries responsibly.
• Kundizzjonijiet Ambjentali: While the push button is IP44 rated, extreme weather conditions may affect performance. Ensure the chime unit is used indoors in a dry environment.

Issolvi l-problemi

Speċifikazzjonijiet

• Mudell: DBY-22352BS
• Ditta: Byron
• Medda bla fili: Sa 150 metru (mingħajr ostaklu)
• Melodiji: 16 magħżula
• Livelli tal-Volum: XNUMx aġġustabbli
• Push Button Battery: 1x CR2032 (inkluż)
• Chime Power: AC Plug-in
• Protection Rating (Push Button): IP44 (dustproof and splash-resistant)
• Dimensjonijiet tal-Prodott: 10.04 x 7 x 5.93 ċm; 610 g

Garanzija u Appoġġ

For warranty information, technical support, or to purchase replacement parts, please refer to the official Byron webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm il-prova tax-xiri tiegħek għal talbiet ta’ garanzija.

Manifattur: Byron

Websit: www.byron.com (Eżampil-link, il-link attwali jista' jvarja)