Yaheetech Entryway Console Table with Outlets and USB Ports

1. Informazzjoni Importanti dwar is-Sigurtà

Please read and understand all instructions and safety warnings before assembling and using this product. Failure to follow these instructions may result in injury or damage to the product.

• Żomm il-partijiet żgħar u l-materjali tal-ippakkjar 'il bogħod mit-tfal.
• Arma l-prodott fuq wiċċ artab u nadif biex tevita l-grif.
• Kun żgur li l-konnessjonijiet kollha huma siguri qabel l-użu. Iċċekkja perjodikament u erġa' ssikka l-qafliet kif meħtieġ.
• Do not overload the table or shelves. Refer to the "Specifications" section for weight limits.
• Use the included anti-tipping hardware to secure the table to a wall, especially if children or pets are present.
• Do not expose the power outlet to moisture or liquids.
• Always unplug the power cord from the wall outlet before cleaning or moving the table.
• Dan il-prodott huwa maħsub għal użu ġewwa u residenzjali biss.

Refer to the included Assembly Guide for detailed safety warnings and instructions.

2. Kontenut tal-Pakkett

Qabel tibda l-assemblaġġ, ivverifika li l-partijiet kollha huma preżenti u mhux imħassra. Jekk xi partijiet huma neqsin jew imħassra, tipproċedix bl-assemblaġġ. Ikkuntattja l-appoġġ għall-klijenti għall-assistenza.

Il-pakkett għandu jinkludi:

• Tabletop with integrated drawer slides
• Komponenti tal-kexxun (quddiem, wara, ġnub, qiegħ)
• Side panels with X-shaped reinforcement
• Xkaffa tan-nofs
• L-ixkaffa tal-qiegħ
• Power outlet unit (2 AC outlets, 2 USB ports, switch, 6.5 ft cord)
• Hardware pack (screws, dowels, cam locks, anti-tipping kit, drawer knobs)
• Gwida għall-Assemblea

Stampa 2.1: All components and dimensions of the console table.

3. Istruzzjonijiet tal-Assemblea

Assembly is recommended for two people. Please follow the steps outlined in the included Assembly Guide. Basic tools such as a screwdriver and hammer are recommended.

3.1. Gwida bil-Vidjo tal-Assemblaġġ

For a visual guide, please watch the official installation video below. This video demonstrates the step-by-step assembly process for the console table with outlets and USB ports.

3.2. Key Assembly Steps

1. Ipprepara l-Komponenti: Lay out all parts and hardware on a clean, soft surface. Identify each piece using the labels in the Assembly Guide.
2. Arma l-kexxun: Construct the drawer box using the provided panels and hardware. Ensure the ball-bearing drawer slides are correctly attached to the drawer sides.
3. Attach Drawer Slides to Tabletop: Secure the remaining parts of the ball-bearing drawer slides to the underside of the tabletop.
4. Arma Pannelli tal-Ġnub: Attach the X-shaped reinforcement bars to the side panels as indicated in the guide.
5. Connect Shelves: Fasten the middle and bottom shelves to the side panels.
6. Installa s-Sokit tal-Enerġija: Carefully place the power outlet unit into the designated cutout on the middle shelf and secure it with screws.
7. Waħħal il-wiċċ tal-mejda: Secure the assembled tabletop to the main frame of the table.
8. Daħħal il-Kexxun: Slide the completed drawer into the installed drawer slides.
9. Install Drawer Knobs: Attach the drawer knobs to the drawer front.
10. Installa l-Ħardwer Kontra t-Tqall: Securely attach the anti-tipping kit to the back of the table and to a wall stud to prevent accidental tipping.

Stampa 3.2: Details of the drawer slides, power outlet, and structural supports.

Stampa 3.3: Anti-tipping safety measure for the console table.

4. Operating Instructions (Power Outlet)

This console table features a built-in power outlet with 2 AC outlets and 2 USB ports for convenient charging of electronic devices.

1. Qabbad mal-Enerġija: Plug the table's 6.5 ft power cord into a standard wall outlet.
2. Attiva l-Qawwa: Locate the power switch on the outlet unit. Press the switch to turn on the power to the AC and USB ports. A light indicator will confirm the unit is active.
3. Apparat tal-Iċċarġjar: Plug your devices into the available AC outlets (120V/12A, 1500W max) or USB ports (5V/2A).
4. Itfi: When not in use, press the power switch to turn off the outlet unit to conserve energy and for safety.

Stampa 4.1: Details of the integrated power outlet and USB charging ports.

Nota: The middle shelf, where the power outlet is located, can be reversed during assembly to face either direction, allowing for flexible placement and access to the power unit.

Stampa 4.2: Flexible middle shelf for power outlet accessibility.

5. Manutenzjoni

• Tindif: Imsaħ l-uċuħ tal-mejda b'reklamaramp Ċarruta għal tindif ġenerali. Għal tixrid, imsaħ immedjatament b'ċarruta niexfa. Evita kimiċi ħarxa jew prodotti tat-tindif li joborxu.
• It-tfarfir: Naddaf it-trab fuq il-mejda regolarment b'ċarruta ratba u niexfa.
• Iċċekkja tal-Hardware: Periodically inspect all screws, bolts, and fasteners to ensure they are tight. Re-tighten if necessary to maintain stability.
• Evita dawl tax-xemx dirett: L-espożizzjoni fit-tul għad-dawl tax-xemx dirett tista' tikkawża sfumatura jew ħsara lill-finitura tal-injam.
• Evita l-umdità: Keep the table away from excessive moisture and humidity to prevent warping or damage.

6 Issolvi l-problemi

• It-Tbandil tal-Mejda:
  • Check that all screws and fasteners are securely tightened.
  • Ensure the table is placed on a level surface. Adjust floor glides if available.
  • Verify that the X-shaped side reinforcements are correctly installed and tightened.
• Il-kexxun ma jiżżerżaqx bla xkiel:
  • Ensure the drawer slides are properly aligned and installed according to the assembly instructions.
  • Iċċekkja għal xi ostruzzjonijiet fil-binarji tal-kexxun.
  • Apply a silicone-based lubricant to the slides if needed.
• Is-Sokit tal-Enerġija Mhux Jaħdem:
  • Verify the table's power cord is securely plugged into a functional wall outlet.
  • Check if the power switch on the outlet unit is in the "ON" position.
  • Ensure the wall outlet itself is receiving power (test with another device).
  • Taqbiżx il-wat massimutage (1500W) for the AC outlets.
• Partijiet Neqsin jew Imħassra:
  • Do not attempt to assemble the product. Contact Yaheetech customer support immediately for replacement parts.

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

Yaheetech products are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official Yaheetech websit.

If you encounter any issues, require replacement parts, or have questions regarding assembly or operation, please contact Yaheetech customer support:

• Appoġġ onlajn: Żur il- Yaheetech Store on Amazon għal FAQs u għażliet ta' kuntatt.
• Email/Telefon: Refer to your product packaging or the Yaheetech webis-sit għall-aktar informazzjoni ta' kuntatt aġġornata.

Please have your model number (BY213-C021K-01) and purchase date ready when contacting support.