Introduzzjoni
This manual provides comprehensive instructions for the proper installation, usage, and maintenance of your iGPSPORT BSC100S Cycling Computer Case. Designed specifically for the BSC100S cycling computer, this silicone case offers protection and enhances the device's durability.
Setup u Installazzjoni
The iGPSPORT BSC100S Cycling Computer Case is designed for easy installation and removal, providing full protection without compromising device functionality.
- Ipprepara l-Apparat Tiegħek: Ensure your iGPSPORT BSC100S cycling computer is clean and free of dust or debris before installation.
- Allinja l-Kaxxa: Gently align the silicone case with your BSC100S cycling computer. The case is precisely crafted to fit the device's contours.
- Daħħal l-Apparat: Carefully push the cycling computer into the silicone case. The soft, flexible material allows for easy insertion. Ensure all edges and corners of the device are fully seated within the case for complete protection.
- Iċċekkja Fit: Verify that the case fits snugly around the device, covering all exposed surfaces while leaving necessary ports and buttons accessible. The all-inclusive design provides comprehensive coverage.

Stampa 1: Quddiem view of the iGPSPORT BSC100S Cycling Computer Case, illustrating its form-fitting design.
To remove the case, gently peel back the silicone from one corner and carefully extract the cycling computer. The soft material ensures disassembly without damaging the device.
Usage and Protection
Once installed, the iGPSPORT BSC100S Cycling Computer Case provides a protective layer for your device during use. Its primary function is to shield the cycling computer from scratches, minor impacts, and dust.
- Durabilità Mtejba: The silicone material absorbs shocks, protecting your device from accidental drops or bumps during cycling activities.
- Reżistenza għat-temp: While the case itself is not waterproof, it adds an extra layer of protection against light splashes and dust, complementing the device's existing IP54 rating.
- Qabda komda: The soft silicone material provides a comfortable tactile sensation and improves grip, reducing the chance of accidental slips.
- Disinn portabbli: The lightweight and thin design (approximately 1.55mm thickness) ensures that the case does not add significant bulk, maintaining the portability of your cycling computer for outdoor use.

Immaġni 2: Proġett tal-ġenbfile of the case highlighting its slim 1.55mm thickness, designed for minimal bulk.
Manutenzjoni
To ensure the longevity and appearance of your iGPSPORT BSC100S Cycling Computer Case, follow these maintenance guidelines:
- Tindif: The silicone case can be cleaned with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners, as these may damage the material. Rinse thoroughly and allow to air dry completely before re-installing your device.
- Ħażna: When not in use, store the case in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
- Evita Oġġetti li jaqtgħu: Keep the silicone case away from sharp objects to prevent punctures or tears.
Issolvi l-problemi
If you encounter any issues with your iGPSPORT BSC100S Cycling Computer Case, consider the following:
- Il-Kaxxa Ma Toqgħodx: Ensure you have the correct model, the iGPSPORT BSC100S. This case is specifically designed for this model. If it is the correct model, try re-aligning the device carefully during installation.
- Diffikultà fit-Tindif tat-Tbajja’: For stubborn stains, a soft brush with mild soap and water can be used. Ensure the case is thoroughly rinsed and dried.
- Degradazzjoni tal-Materjal: If the silicone material appears to be degrading (e.g., becoming sticky or brittle), it may be due to prolonged exposure to harsh chemicals, extreme temperatures, or direct sunlight. Follow maintenance guidelines to prevent this.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | iGPSPORT |
| Mudell Kompatibbli | iGPSPORT BSC100S Cycling Computer |
| Materjal | Silikonju |
| Kulur | Iswed |
| Ħxuna | Madwar 1.55mm |
| Komponenti Inklużi | Silicone Case (1) |
| Dimensjonijiet tal-Pakkett tal-Oġġett | 4.41 x 2.83 x 0.94 pulzieri |
| Piż tal-Pakkett | 0.02 Kilogrammi |
| Numru tal-Parti | BH100 |
Garanzija u Appoġġ
The iGPSPORT BSC100S Cycling Computer Case comes with a garanzija ta 'sena mid-data tax-xiri, li tkopri difetti fil-manifattura.
For warranty claims, technical support, or further inquiries, please contact iGPSPORT customer service through their official channels or visit the Ħanut iGPSPORT fuq Amazon.





