Manwal tal-Utent tar-Riċevitur FrSky 2.4GHz Archer Plus R6

1. Introduzzjoni

The FrSky Archer Plus R6 is a 2.4GHz receiver designed for remote control applications, offering enhanced anti-RF-interference capabilities and robust RF performance. This receiver supports both ACCESS and ACCST D16 modes, automatically matching the RF protocol during the binding process. It features 6 high-precision PWM channels and supports SBUS output for up to 24 channels, along with an SBUS input for signal redundancy. The Archer Plus R6 also includes a basic Black-Box function for preserving flight data and supports Over-The-Air (OTA) firmware updates.

2. Karatteristiċi ewlenin

• Enhanced Anti-RF-Interference capability for solid RF performance.
• Smart-matched ACCESS & ACCST D16 modes.
• Supports basic Black-Box function for flight data preservation.
• 6 high-precision PWM channel ports.
• SBUS Out port (supports 16CH/24CH mode).
• SBUS In port (supports Signal Redundancy).
• Full control range with telemetry (S.Port or FBUS).
• Over-The-Air (OTA) FW update capability.
• Batterija esterna/apparat voltage detection via AIN2.

3. Speċifikazzjonijiet

4. Kontenut tal-Pakkett

• 1x FrSky Archer Plus R6 Receiver

5. Prodott Aktarview

Figura 1: Minn fuq għal isfel view of the FrSky Archer Plus R6 Receiver, showing its compact size and dual antennas.

Figura 2: Close-up view of the FrSky Archer Plus R6 Receiver, highlighting the PWM channel pins (1-5), F.BUS/S.PORT, SBUS IN, and SBUS OUT ports, along with the LED indicator.

Figura 3: Qiegħ view of the FrSky Archer Plus R6 Receiver, showing the QR code and internal components.

6. Setup

6.1 Proċedura vinkolanti

The Archer Plus R6 receiver supports both ACCESS and ACCST D16 protocols. The RF protocol is automatically matched during the binding process with your FrSky 2.4GHz transmitter.

1. Put your FrSky transmitter into binding mode (refer to your transmitter's manual for specific instructions).
2. Power on the Archer Plus R6 receiver while holding down the F/S button. The LED on the receiver will indicate binding status.
3. Once the binding is successful, the LED on the receiver will change to a solid green.
4. Itfi u erġa' daħħal l-enerġija kemm tat-trasmettitur kif ukoll tar-riċevitur biex tikkonferma r-rabta.

6.2 Dijagramma tal-Wajers u Konnessjonijiet

Connect the receiver to your flight controller or servos according to your model's requirements.

• Kanali PWM (1-6): Connect individual servos or other PWM-controlled devices to these ports.
• SBUS Out: Connect to a flight controller that supports SBUS input for up to 16 or 24 channels, depending on the receiver's mode.
• SBUS In: Use this port for signal redundancy by connecting it to the SBUS Out of another FrSky receiver.
• S.Port / FBUS: This port provides telemetry data. Connect to compatible telemetry devices or flight controllers. The FBUS protocol simplifies connections with multiple telemetry devices.
• AIN2: Għal vol esterntage detection (e.g., battery voltage) using a 1:10 voltage diviżur.

6.3 Installazzjoni tal-antenna

The Archer Plus R6 features dual detachable antennas for optimal reception and range. Ensure the antennas are mounted at a 90-degree angle to each other and away from carbon fiber or metal parts of your model to minimize signal blocking. Secure them properly to prevent movement during flight.

7. Operazzjoni

7.1 Channel Modes

The receiver operates in two main channel modes:

• 6 High-precision PWM & 16 SBUS channels Mode: Provides 6 direct PWM outputs and 16 channels via SBUS.
• 6 High-precision PWM & 24 SBUS channels Mode: Provides 6 direct PWM outputs and 24 channels via SBUS.

The specific mode is typically configured through your transmitter's settings or during the binding process, depending on the firmware version.

7.2 Telemetry and FBUS Protocol

The Archer Plus R6 supports full-range telemetry via S.Port or the FBUS protocol. FBUS allows for seamless pairing with multiple telemetry devices (e.g., XACT servos, ADV Sensors) and simplifies wiring by using a single line for data transmission.

7.3 Signal Redundancy

The SBUS In port allows the Archer Plus R6 to function as a primary receiver in a redundant setup. By connecting the SBUS Out of another FrSky receiver to the SBUS In of the R6, you can enhance signal reliability and safety.

7.4 Over-The-Air (OTA) Firmware Update

The receiver supports OTA firmware updates, allowing you to update the receiver's firmware wirelessly through your compatible FrSky transmitter. Refer to your transmitter's manual and FrSky's official websit għall-aħħar firmware u proċeduri ta' aġġornament.

7.5 Black-Box Function

The integrated Black-Box function records basic flight data, such as power and signal-related information. This data can be useful for diagnostics and analyzing flight performance. Accessing and interpreting this data typically requires specific tools or software from FrSky.

8. Manutenzjoni

8.1 Aġġornamenti tal-Firmware

Regularly check the FrSky official website for the latest firmware updates for your Archer Plus R6 receiver. Firmware updates can improve performance, add new features, or address known issues. Utilize the OTA update feature for convenience.

8.2 Kura Ġenerali

• Żomm ir-riċevitur nadif u ħieles mit-trab, il-ħmieġ u l-umdità.
• Evita li tesponi r-riċevitur għal temperaturi estremi jew dawl tax-xemx dirett għal perjodi twal.
• Kun żgur li l-konnessjonijiet kollha huma siguri u ħielsa mill-korrużjoni.
• Handle the antennas carefully to prevent damage.

9 Issolvi l-problemi

• No Signal / Loss of Control: Ensure the receiver is correctly bound to the transmitter. Check antenna placement and ensure they are not obstructed. Verify power supply to the receiver.
• Nuqqas ta' Irbit: Confirm the transmitter is in binding mode and the receiver's F/S button is held during power-up. Ensure compatibility between transmitter and receiver protocols (ACCESS/ACCST D16).
• Kwistjonijiet ta' Telemetrija: Check S.Port/FBUS connections. Ensure telemetry sensors are correctly connected and configured in the transmitter.
• Sinjal Intermittenti: Check for potential sources of RF interference near the model or operating area. Ensure antennas are undamaged and properly oriented.

10. Informazzjoni dwar is-Sigurtà

• Always operate your RC model in a safe and responsible manner.
• Ensure all connections are secure before operating your model. Loose connections can lead to loss of control.
• Never operate your RC model near people, animals, or property that could be damaged.
• Regularly inspect your receiver and other RC components for any signs of damage or wear.
• Keep the receiver away from water and other conductive materials.

11. Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija u appoġġ tekniku, jekk jogħġbok irreferi għall-paġna uffiċjali ta' FrSky. website or contact your authorized FrSky dealer. Keep your proof of purchase for any warranty claims.