1. Introduzzjoni
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your APOLLO Full Electric Stacker Powered Straddle Forklift. Please read this manual thoroughly before operating the equipment to ensure proper use and to prevent injury or damage.
2. Informazzjoni dwar is-Sigurtà
TWISSIJA: Nuqqas li ssegwi dawn l-istruzzjonijiet ta’ sigurtà jista’ jirriżulta fi korriment serju jew mewt.
- Always read and understand the complete user manual before operation.
- Ensure proper training and authorization before operating this equipment.
- Operate only on flat, stable surfaces. Avoid uneven ground, potholes, or steep inclines.
- Adhere strictly to the stated load capacity (3300 lbs). Overloading can cause instability and damage.
- Be aware of the mast extended height (123.8") and ensure adequate overhead clearance.
- Utilize the emergency stop button in critical situations.
- Żomm idejk u saqajk 'il bogħod mill-partijiet li jiċċaqalqu, speċjalment waqt operazzjonijiet ta' rfigħ u tbaxxija.
- Regularly inspect the equipment for any signs of wear, damage, or malfunction.
- The safety explosion-proof valve prevents sudden load drops in case of hydraulic hose failure. Do not tamper b'karatteristiċi ta 'sikurezza.
- Pay attention to warning lights and buzzer alerts during operation.
3. Setup u Assemblea
The APOLLO Full Electric Stacker requires partial assembly upon arrival. Follow these steps carefully for proper setup.
3.1 Żpakkjar u Tħejjija Inizjali
Upon receiving the product, ensure all components are present and undamaged. The main unit will be secured on a pallet.
Video: Unpacking and Assembly Guide for Straddle Legs Stacker. This video demonstrates the step-by-step process of unpacking the unit, installing the forks and straddle legs, and performing initial checks.
- Wiri tal-Prodott: After receiving, the product will be displayed on its shipping pallet.
- Power On and Emergency Stop: Turn on the power and pull up the emergency stop button.
- Lift Fork: Press the lifting button at the tiller head to raise the fork carriage.
- Remove Forks: Carefully take out the individual forks from the packaging.
- Install Straddle Legs: Take out and install one straddle leg. Repeat for the other side.
- Unpack Truck Body: Remove any remaining packaging securing the main truck body to the pallet.
- Lift Truck from Pallet: Tie a sling belt to the truck body. Place the fork of a separate forklift into the sling belt. Lift the truck to remove the pallet beneath, then carefully lower the truck onto the ground.
- Re-install Forks: Turn on the power and lift the fork carriage. Take out the screw at one end of the fork plate. Hang each fork onto the fork plate properly by anticlockwise rotating the screw on it. Tighten the screw on the fork plate.
- Adjust Straddle Leg Width: Adjust the width of the straddle legs as needed. Tighten the 4 bolts at one side of the straddle leg after adjusting the width. Repeat for the other side.
- Initial Functionality Check: Check if the truck can walk normally (forward/backward) and lift normally.
4. Operazzjoni
The APOLLO Full Electric Stacker is designed for efficient material handling. Familiarize yourself with the controls before operation.
4.1 Kontrolli u Funzjonijiet
The multi-functional handle controls all key operations:
- Forward/Reverse Movement: Controlled by the accelerator on the handle.
- Kontroll tal-veloċità: Adjustable via the accelerator.
- Elevation (Lifting/Lowering): Controlled by the button on the handle.
- Brejk ta' Emerġenza: Integrated into the handle for immediate stopping.
- Buttuna Reverse: For quick changes in direction.
- Creep Speed Option: Allows for precise, slow movements in tight spaces.
- Upright Walking Mode: Enables operation while walking upright.
4.2 Irfigħ u Immaniġġjar
The stacker is ideal for cargo handling, stacking, and order-picking. Note that the load capacity varies with lifting height; the higher the height, the smaller the permissible load.
Image: Operational cycle of the APOLLO Electric Stacker, illustrating how it moves, lifts, and handles pallets efficiently.
Image: The electric stacker demonstrating its lifting capability with a maximum load capacity of 3300 lbs and a laden lifting speed of 5.9 inches per second.
4.3 Fork and Leg Adjustment
The overall type adjustable forks can be lowered to the same level as the legs, making it suitable for both stringer and block pallets. The adjustable fork width ranges from 0.1" to 23.6".
Image: Detailed dimensions of the stacker's forks and straddle legs, highlighting the adjustable width and spacing for various pallet types.
Image: The electric stacker's versatility in handling various pallet types, including closed pallets, with its adjustable fork width.
5. Manutenzjoni
5.1 Iċċarġjar tal-batterija
To charge the battery, open the battery cover, connect the battery connector to the charger, and then insert the charger plug into a suitable socket or wall outlet.
5.2 Spezzjoni Ġenerali
Regularly inspect the stacker for any signs of wear, damage, or loose components. Pay particular attention to the forks, chains, hydraulic system, and wheels. Ensure all safety features, such as the emergency stop button and warning lights, are functioning correctly.
5.3 Tindif
Keep the stacker clean to ensure optimal performance and longevity. Wipe down surfaces with a damp drapp. Evita li tuża kimiċi ħarxa jew ilma eċċessiv, speċjalment ħdejn komponenti elettriċi.
6 Issolvi l-problemi
This section provides solutions to common issues you might encounter with your electric stacker.
6.1 Vol. Baxxtage Protezzjoni
The stacker has a low-voltage protection function. When the electric quantity is less than 20%, the stacker will only be able to move, but not lift. This is a safety feature to prevent battery damage. Recharge the battery immediately when this occurs.
6.2 Kwistjonijiet Ġenerali
For any other operational issues or concerns, please refer to the detailed troubleshooting guide in the full product manual or contact APOLLO customer support for assistance.
7. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Kapaċità tat-Tagħbija | 3300 lbs |
| Lifting Height (min/max) | 2.8" - 98" |
| Adjustable Fork Width | 0.1" - 23.6" |
| Mast Lowered Height | 74.6" |
| Mast Extended Height | 123.8" |
| Raġġ tat-tidwir | 52.9" |
| Wisa' tal-Kariera | 88.3" |
| Piż tal-oġġett | 1500 Liri |
| Numru tal-Mudell | A-3050 |
| Materjal | Azzar Liga |
| Manifattur | Apollo |
| Pajjiż ta' Oriġini | Iċ-Ċina |
8. Garanzija u Appoġġ
APOLLO offers a one-year warranty for this product, excluding wearing parts such as wheels and fuses. For any service needs or inquiries, a dedicated after-sales team is available to assist you.
For customer support, please refer to the contact information provided with your purchase or visit the official APOLLO store online.
