Introduzzjoni
This manual provides essential instructions for the safe and efficient setup, operation, and maintenance of your Funsicle Quickset 12ft x 36in Round Inflatable Above Ground Swimming Pool. This spacious pool, measuring 12 feet in diameter and 36 inches deep, is designed for recreational use, accommodating up to 6 people. Please read all instructions carefully before installation and use to ensure proper function and safety.
Informazzjoni dwar is-Sigurtà
TWISSIJA: Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista’ jirriżulta fi korriment serju jew mewt.
- Superviżjoni tal-adulti Meħtieġa: Never leave children unattended in or near the pool. Constant adult supervision is mandatory.
- Ebda Għadds: This pool is not designed for diving. Shallow water can cause serious injury.
- Sigurtà Elettrika: Ensure all electrical components, including the filter pump, are connected to a GFCI (Ground-Fault Circuit Interrupter) protected outlet. Do not use extension cords. Keep electrical cords away from water.
- Preparazzjoni tas-Sit: Install the pool on a firm, level surface free of sharp objects, debris, or uneven ground. Uneven ground can cause the pool to collapse, leading to injury or water spillage.
- Regolamenti Lokali: Qabel ix-xiriasing and setting up this product, review and check your local HOA rules, building codes, and restrictions regarding private above-ground pools. Not all housing agencies permit them.
- Immaniġġjar Kimiku: Handle pool chemicals according to manufacturer's instructions. Keep chemicals out of reach of children.
- Drenaġġ: Kun żgur li hemm drenaġġ xieraq 'il bogħod miż-żona tal-pixxina biex tevita l-akkumulazzjoni tal-ilma.
Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha elenkati hawn taħt huma preżenti fil-pakkett tiegħek:
- Funsicle Quickset Pool Liner (12ft x 36in)
- 110-120V RX200 Filter Pump
- Skartoċċ tal-Filtru tat-Tip D
- Garża tat-Tiswija
- Hoses and connectors for filter pump

Image: Included RX200 filter pump and Type D filter cartridge.
Setup Istruzzjonijiet
Follow these steps for a quick and hassle-free pool setup:
- Għażla tas-Sit u Preparazzjoni:
- Choose a flat, level area in your backyard, away from power lines, trees, and structures.
- Clear the area of any sharp objects, rocks, roots, or debris that could puncture the pool liner.
- Lay down a ground cloth (not included) for added protection.
- Unpack the Pool: Carefully remove the pool liner from its packaging. Allow it to warm up in the sun for a short period to make the material more pliable.
- Onfoħ iċ-Ċirku ta' Fuq: Locate the air valve on the top inflatable ring. Use an air pump (not included) to inflate the ring until it is firm but not overinflated. Do not use a high-pressure air compressor.
- Imla bl-Ilma: Begin filling the pool with water. As the water level rises, the pool walls will automatically rise and take shape. Smooth out any wrinkles on the bottom of the pool as it fills to ensure an even base.
- Qabbad il-Pompa tal-Filtru:
- Attach the hoses from the pool's inlet and outlet fittings to the RX200 filter pump.
- Kun żgur li l-konnessjonijiet kollha huma sikuri biex tevita t-tnixxijiet.
- Poġġi l-pompa tal-filtru fuq wiċċ stabbli u livellat mill-inqas 6 piedi 'l bogħod mill-pixxina.
- Plug the filter pump into a GFCI-protected electrical outlet.

Image: The Funsicle Quickset pool fully set up with its filter pump connected.

Image: Diagram highlighting key features like durable construction, easy inflation, and effective filtration.

Image: Visual representation of the pool's 36-inch height.

Immaġni: Sezzjoni trasversali view illustrating the multi-layered ToughMesh construction for durability.
Istruzzjonijiet Operattivi
To ensure optimal performance and water quality, follow these operating guidelines:
- Tħaddim tal-Pompa tal-Filtru: Run the RX200 filter pump daily for at least 4-6 hours to circulate and filter the pool water. The exact duration may vary based on usage and environmental conditions.
- Livell tal-Ilma: Maintain the water level between the MIN and MAX fill lines indicated on the pool liner. An appropriate water level is crucial for proper pump function and pool stability.
- Kimika tal-Ilma: Regularly test your pool water using a test kit (not included) to ensure proper pH and chlorine levels. Maintain pH between 7.2 and 7.6 and chlorine levels as recommended by your chemical supplier.

Image: Water being returned to the pool through the filter system's jet.
Manutenzjoni
Regular maintenance is key to extending the life of your pool and ensuring clean water.
- Skimming u Vacuum cleaner: Daily skim debris from the water surface and periodically vacuum the pool bottom to remove settled dirt and leaves.
- Tindif/Sostituzzjoni tal-Iskrataċ tal-Filtru: The Type D filter cartridge should be rinsed with a garden hose every few days, depending on pool usage. Replace the filter cartridge every 2-4 weeks, or sooner if it remains dirty after rinsing. Only use Funsicle Type D filter cartridges.
- Trattament tal-Ilma: Follow a consistent water treatment regimen using appropriate pool chemicals to prevent algae growth and maintain sanitation.
- Tixxotta l-Pixxina: When preparing for storage or for a full water change, use the 2-in-1 drainage plug for convenient lock and unlock. No tools are required for drainage.

Image: Close-up of a Funsicle Type D filter cartridge, essential for water filtration.
Issolvi l-problemi
Irreferi għal din it-taqsima għal kwistjonijiet komuni u s-soluzzjonijiet tagħhom.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-pompa tal-filtru mhix qed taħdem | No power; GFCI tripped; clogged filter; air in system. | Check power connection; reset GFCI; clean/replace filter cartridge; bleed air from pump system. |
| Ilma mhux ċar | Filtrazzjoni insuffiċjenti; bilanċ kimiku mhux xieraq; użu tqil. | Run pump longer; clean/replace filter; test and adjust water chemistry (chlorine, pH); shock treat pool. |
| Pool losing water/leaking | Puncture in liner; loose hose connections; overfilling. | Inspect liner for holes and use repair patch; tighten all hose clamps; ensure water level is not above recommended line. |
| Pool not maintaining shape | Uneven ground; insufficient water fill; top ring not fully inflated. | Ensure pool is on perfectly level ground before filling; fill to recommended water level; re-inflate top ring if soft. |
Ħażna
Proper storage will prolong the life of your Funsicle pool.
- Ixxotta l-Pixxina: Completely drain all water from the pool using the drainage plug.
- Nadif u Nixxef: Thoroughly clean the pool liner and all components. Ensure everything is completely dry before folding to prevent mold and mildew.
- Żarma: Disconnect the filter pump and hoses. Deflate the top ring.
- Itwi u Aħżen: Carefully fold the pool liner to avoid creases. Store the pool, pump, and accessories in a dry, cool place, away from direct sunlight and extreme temperatures.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Funsiku |
| Numru tal-Mudell | P1A01236A |
| Dimensjonijiet tal-Prodott | 144"T x 144"W x 36"G (dijametru ta' 12ft x għoli ta' 36in) |
| Forma | Round |
| Kapaċità | 74 Gallons (Note: This capacity seems unusually low for the dimensions provided in the product data. Please refer to the product packaging for the most accurate water capacity.) |
| Kulur | Griż |
| Materjal | ToughMesh, Polyvinyl Chloride (PVC) |
| Komponenti Inklużi | Filter Cartridge, Filter Pump, Repair Patch |
| UPC | 193802325959 |
| Assemblea Meħtieġa | Iva |
Garanzija u Appoġġ
The Funsicle Quickset Pool and its included pump come with a Garanzija ta' 1 snin mill-manifattur. Din il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu normali.
For warranty claims, technical support, or replacement parts, please contact Funsicle customer service directly. Refer to the contact information provided on your product packaging or the official Funsicle websit.