Eaglestone Automatic Toy Gun Instruction Manual

Prodott Overview

The EagleStone Automatic Toy Gun (Model 803A) is an electric foam blaster designed for recreational use. It features multiple shooting modes, automatic shell ejection, and comes with rechargeable batteries and a large supply of darts and bullet shells. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal performance.

Figure 1: Eaglestone Automatic Toy Gun and included accessories. This image displays the red toy gun, safety glasses, multiple targets, 150 soft darts, and 30 bullet shells.

Kontenut tal-Pakkett

Qabel l-assemblaġġ, ivverifika li l-komponenti kollha elenkati hawn taħt huma preżenti fil-pakkett tiegħek:

• 1x Soft Bullet Gun (Main Blaster Body)
• 2x Lithium Batteries (7.4V 500mAh rechargeable)
• 1x USB Iċċarġjar Cable
• 1x Goggles (Safety Glasses)
• 1x Tornavit
• 3x Rebound Targets
• 150x Soft Bullets (Foam Darts)
• 30x Bullet Shells

Figura 2: Dettaljat view of all items included in the product package. This diagram visually lists the soft bullet gun, two lithium batteries, USB charging cable, goggles, screwdriver, three rebound targets, 150 soft bullets, and 30 bullet shells.

Setup u Assemblea

Follow these steps to assemble your Eaglestone Automatic Toy Gun. Ensure the blaster is powered off and the battery is not installed during assembly.

1. Toy Gun Head Installation: Align the front barrel section with the main body of the toy gun and securely attach it.
2. Sight Installation: Mount the adjustable 6x scope onto the designated rail on top of the blaster. Ensure it clicks into place or is tightened securely.
   

   Figure 3: Installation of the sight onto the blaster's top rail.

3. Buttstock Mounting: Attach the buttstock to the rear of the toy gun body. Push firmly until it locks securely.
   

   Figure 4: Attaching the adjustable buttstock.
4. Assemble the Magazine: Connect the individual bullet shells to form the continuous bullet belt magazine.
   

   Figure 5: Assembling the bullet belt magazine from individual shells.

5. Load the Bullets: Insert the soft foam darts into the bullet shells on the assembled magazine belt.
6. Installa l-batterija: Open the battery compartment and connect one of the fully charged 7.4V 500mAh lithium batteries. Close the compartment securely.
   

   Figure 6: Inserting the rechargeable battery into its compartment.

Figure 7: Comprehensive visual guide for the assembly process. This image illustrates the eight main steps for setting up the toy gun, from installing the gun head to high-speed shooting.

Istruzzjonijiet Operattivi

Modi ta' Sparar

The Eaglestone Automatic Toy Gun offers three distinct shooting modes for varied play experiences:

• Auto sħiħ: Hold the trigger to fire a continuous burst of darts. This mode is ideal for rapid firing.
• Safe (Manual Single-Shot): In this mode, the blaster requires manual priming for each shot. This allows for a more controlled, single-shot experience.
• Semi-Auto: Press the trigger once for each single shot. This mode provides a balance between rapid firing and controlled shooting.

Figure 8: Visual representation of the three selectable shooting modes. This image shows the selector switch positions for Manual, Auto Single Shot, and Auto Burst modes.

Shell Ejection and Range

This motorized blaster features an automatic shell ejection mechanism, simulating a realistic firing experience. Each shot with a dart will cause an empty shell to pop up automatically.

The blaster is capable of achieving an accurate range of approximately 35-50 feet (10.6-15.2 meters) with its high-speed motor. The adjustable 6x scope enhances aiming precision for improved accuracy.

Figure 9: Illustration of the blaster's long-range capability, showing a dart trajectory towards a target.

Iċċarġjar u Użu tal-batterija

The toy gun operates on two 7.4V 500mAh rechargeable lithium batteries. Use the provided USB charging cable to charge the batteries. A full charge typically takes a few hours and provides several hours of operation.

The blaster can also be used without batteries by manually pulling back the charging handle to prime it for single shots.

Manutenzjoni

Proper maintenance ensures the longevity and optimal performance of your toy gun.

• Tindif: Regularly wipe down the exterior of the blaster with a clean, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
• Dart and Shell Management: Ensure darts and shells are clean and undamaged before use to prevent jamming. Store darts and shells in a dry place away from direct sunlight.
• Kura tal-batterija:
  • Always use the provided USB charging cable and charger.
  • Do not overcharge the batteries. Disconnect once fully charged.
  • If storing the blaster for an extended period, remove the batteries.
  • Aħżen il-batteriji f'post frisk u niexef.
• Lubrikazzjoni: Do not attempt to lubricate internal mechanisms unless specifically instructed by the manufacturer.

Issolvi l-problemi

If you encounter issues with your Eaglestone Automatic Toy Gun, refer to the following common problems and their solutions:

Speċifikazzjonijiet

Informazzjoni dwar is-Sigurtà

Always prioritize safety when operating the toy gun:

• Always wear the provided safety goggles during use.
• Timmirax lejn għajnejn jew wiċċ.
• Uża biss darts iddisinjati għal dan il-prodott. Timmodifikax id-darts jew il-blaster.
• Do not fire at close range.
• Żomm 'il bogħod minn tfal żgħar u annimali domestiċi.
• Issorvelja lit-tfal waqt il-logħob.

Garanzija u Appoġġ

Specific warranty details for the Eaglestone Automatic Toy Gun are not provided within this manual. For warranty claims, technical support, or replacement parts, please refer to the product packaging or contact EagleStone customer service directly through their official websit jew il-bejjiegħ bl-imnut minn fejn inxtara l-prodott.

You may visit the official EagleStone Store on Amazon for more information: EagleStone Store