Introduzzjoni
Thank you for choosing the Mohu Curve Indoor TV Antenna. This antenna is designed to receive over-the-air (OTA) broadcast television signals, including Full HD 1080p, UHD 4K, 8K, and NEXTGEN TV, depending on your coverage area. The multi-directional design and included Jolt Switch amplifier enhance signal reception for a wide range of channels. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your antenna.
Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:
- Mohu Curve Digital TV Antenna
- Jolt Switch In-Line Amplifier with USB Cable
- 10 ft. High-Performance Coaxial Cable
- Antenna Stand
- Manwal ta 'Istruzzjoni (dan id-dokument)
Image: Mohu Curve antenna, Jolt Switch amplifier, USB cable, and coaxial cable.
Setup Istruzzjonijiet
- Assemble the Antenna Stand: If using the stand, attach the Mohu Curve antenna to the provided stand. The antenna can also be mounted on a wall using the keyholes on the stand.
- Qabbad il-Kejbil Koassjali: Connect one end of the 10 ft. coaxial cable to the antenna's F-connector.
- Connect the Jolt Switch Ampaktar ħaj:
- Connect the other end of the coaxial cable from the antenna to the "ANT" port on the Jolt Switch ampaktar ħaj.
- Connect the short coaxial cable from the "TV" port of the Jolt Switch amplifier to the "ANT/IN" or "CABLE/IN" port on your television.
Image: The Jolt Switch amplifier with ANT and TV ports, and USB power cable.
Image: Jolt Switch amplifier connected to the antenna input on the back of a television.
- Qawwa l- Ampaktar ħaj: Connect the USB cable from the Jolt Switch amplifier to an available USB port on your television. If your TV does not have a USB port, or if it does not provide sufficient power, use a separate USB wall adapter (not included).
- Poġġi l-antenna: Place the antenna in a location where it can receive the best signal. This is typically near a window, on a wall, or on a high shelf. Experiment with different locations to find the optimal spot.
- Agħmel Skennjar tal-Kanali:
- Turn on your television and navigate to the TV's setup menu.
- Select "Antenna" or "Air" as the input source.
- Initiate a "Channel Scan" or "Auto Program" function. This process may take several minutes.
- After the scan is complete, your TV will display the available channels.
Istruzzjonijiet Operattivi
Once the setup is complete and a channel scan has been performed, you can begin watching free over-the-air television. Use your TV's remote control to browse and select channels.
Jolt Switch Amplifier Usage
The Jolt Switch amplifier features an ON/OFF switch to control signal amplification. In areas with strong signals, amplification may not be necessary and could potentially over-amplify the signal, leading to pixelation or loss of channels. In such cases, try turning the amplifier OFF. For weaker signal areas, turn the amplifier ON to boost reception.
Antenna Placement and Optimization
The performance of your antenna is highly dependent on its placement. Consider the following tips for optimal reception:
- Ogħla hija Aħjar: Generally, placing the antenna higher up will improve reception.
- Ħdejn Tieqa: Windows often provide clearer paths to broadcast towers.
- Away from Obstructions: Walls, large metal objects, and other electronic devices can interfere with signals.
- Esperiment: Try different locations and orientations. After each significant adjustment, perform a new channel scan on your TV.
- Iċċekkja l-Qawwa tas-Sinjal: Some televisions have a signal strength meter in their settings menu, which can help you fine-tune placement.
Image: The Mohu Curve antenna positioned on a media console, demonstrating a typical indoor placement.
Issolvi l-problemi
- No channels found or poor reception:
- Ensure all connections are secure, especially the coaxial cable to the antenna, amplifier, and TV.
- Verify the Jolt Switch amplifier is powered (USB connected) and try toggling its ON/OFF switch.
- Reposition the antenna. Try moving it to a different wall, higher location, or closer to a window.
- Perform a new channel scan after each antenna repositioning.
- Iċċekkja FCC DTV Reception Maps or similar local resources to determine available channels and broadcast tower locations in your area.
- Pixelated picture or intermittent signal:
- This can indicate either a weak signal or an over-amplified signal. Try toggling the Jolt Switch amplifier ON/OFF.
- Adjust antenna placement slightly. Small movements can sometimes make a significant difference.
- TV not recognizing antenna input:
- Ensure your TV's input source is set to "Antenna" or "Air."
- Confirm the coaxial cable is connected to the correct "ANT/IN" port on your TV.
Speċifikazzjonijiet
| Mudell | KURVA |
| Brand | Mohu |
| Tip ta' Antenna | Antenna HDTV fuq ġewwa |
| Firxa | Sa 60 mil |
| Meded ta' Frekwenza | UHF, Hi-VHF |
| Ampaktar ħaj | Jolt Switch 18 dB In-Line USB Ampaktar ħaj |
| Dimensjonijiet (H x W x D) | 8.25 x 11.75 x 2.5 pulzieri |
| Piż | 1.46 liri |
| Impedenza | 75 Ohm |
| Tul tal-Kejbil Coaxial | 10 pied. |
| Kulur | Griż sħun |
Manutenzjoni
The Mohu Curve antenna requires minimal maintenance. To clean, gently wipe the surface with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the antenna and cables are not exposed to extreme temperatures or moisture.
Garanzija u Appoġġ
The Mohu Curve Indoor TV Antenna comes with a one-year manufacturer warranty. For warranty claims, technical assistance, or further support, please contact Mohu customer service. Refer to the official Mohu websit għal informazzjoni ta' kuntatt attwali.
Riżorsi onlajn: For additional information and FAQs, visit the official Mohu websit: www.gomohu.com
