Rocketfish Tilting TV Wall Mount User Manual

Introduzzjoni

Thank you for choosing the Rocketfish Tilting TV Wall Mount. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new TV wall mount. Designed for 32-inch to 90-inch flat-panel televisions, this mount offers a secure and low-profile solution with convenient fingertip tilt adjustment for optimal viewing angles. Please read this manual thoroughly before beginning installation and retain it for future reference.

Image: Rocketfish Tilting TV Wall Mount, front view.

Informazzjoni dwar is-Sigurtà

Installazzjoni jew użu mhux xieraq ta' dan il-prodott jista' jirriżulta fi korriment jew ħsara serja. Jekk jogħġbok osserva l-prekawzjonijiet ta' sigurtà li ġejjin:

• Aqra l-istruzzjonijiet kollha: Ensure you understand all instructions and warnings before installation. If you have any questions, contact customer support.
• Kapaċità tal-piż: Do not exceed the maximum weight capacity of 130 lbs (59 kg). This mount is designed for TVs between 32 and 90 inches.
• Tip ta' Ħajt: This mount is designed for installation on wood stud walls or solid concrete/brick walls. Do not install on drywall alone.
• Installazzjoni professjonali: If you are unsure about your ability to install this mount safely, seek assistance from a qualified professional.
• Kontroll tal-Komponent: Before installation, verify that all components are present and undamaged. Do not use damaged parts.
• Evita li tissikka żżejjed: Do not over-tighten screws, as this may cause damage to the mount or your TV.
• Tfal: Żomm lit-tfal 'il bogħod miż-żona tal-installazzjoni.

Kontenut tal-Pakkett

Carefully unpack the box and ensure all items listed below are present and undamaged. If any parts are missing or damaged, do not attempt to install the mount. Contact Rocketfish customer support for assistance.

• Assemblea tal-Pjanċa tal-Ħajt
• Dirgħajn tal-Bracket tat-TV (2)
• Kit tal-Ħardwer (diversi viti, woxers, spacers, ankri)
• Manwal ta' Istruzzjoni

Setup u Installazzjoni

Għodod Meħtieġa (Mhux Inklużi)

• Tornavit tar-ras Phillips
• Drill with appropriate drill bits (wood or masonry)
• Stud Finder (għall-installazzjoni ta' studs tal-injam)
• Livell
• Lapes
• Tape Measure
• Martell (għal ankri tal-konkrit)

Lista ta' Kontroll ta' Qabel l-Installazzjoni

• Kompatibbiltà tat-TV: Verify your TV's VESA mounting pattern and weight are within the mount's specifications (32"-90" and up to 130 lbs).
• Wall Structure: Ensure the wall can safely support the combined weight of the mount and your TV.
• Post: Choose a mounting location free from electrical wires, water pipes, or other hazards.

Image: Visual representation of TV compatibility for the mount.

Installazzjoni pass pass

1. Locate Wall Studs (Wood Stud Installation): Use a stud finder to locate the edges and center of two adjacent wood studs. Mark the center of the studs at the desired height for the top of your TV. Ensure the marks are level.
2. Immarka l-Punti tat-Tħaffir: Hold the wall plate against the wall, aligning its center with your marked stud centers. Use a level to ensure the wall plate is perfectly horizontal. Mark the drilling points through the holes on the wall plate.
3. Drill Pilota Toqob: For wood studs, drill pilot holes using a 7/32" (5.5 mm) drill bit to a depth of 2.2" (55 mm). For concrete/brick walls, use a 3/8" (10 mm) masonry drill bit to a depth of 2.4" (60 mm) and insert concrete anchors.
4. Waħħal il-Pjanċa tal-Ħajt: Secure the wall plate to the wall using the provided lag bolts and washers. Tighten the bolts firmly but do not over-tighten.
5. Waħħal il-Brakketti tat-TV mat-TV: Carefully place your TV face down on a soft, clean surface. Attach the two TV bracket arms to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.
6. Iddendel it-TV fuq pjanċa tal-ħajt: With assistance, carefully lift the TV and hook the TV bracket arms onto the top edge of the wall plate. Gently lower the TV until the brackets engage with the wall plate.
7. TV Sikura: Locate the locking screws or mechanisms on the bottom of the TV bracket arms. Tighten these screws to secure the TV to the wall plate, preventing accidental dislodgement.
8. Aġġusta l-Inklinazzjoni: Loosen the tilt tension knob(s) on the mount (if applicable) to adjust the TV to your desired viewing angle. Once set, tighten the knob(s) to secure the tilt position.

Tħaddim tal-Karatteristika tal-Inklinazzjoni

The Rocketfish Tilting TV Wall Mount features fingertip tilt technology, allowing you to easily adjust your TV's vertical viewing angle. To tilt your TV:

1. Loosen Tension: Locate the tilt tension knob(s) on the side or bottom of the TV bracket arms. Turn the knob(s) counter-clockwise slightly to loosen the tension.
2. Aġġusta Angolu: Gently push or pull the bottom of your TV to achieve the desired upward or downward tilt angle.
3. Pożizzjoni Sikura: Once the desired angle is achieved, turn the tilt tension knob(s) clockwise to tighten and secure the TV in place. Ensure the TV is stable before releasing it.

Image: Close-up of the tilt tension knob for adjustment.

Manutenzjoni

Manutenzjoni regolari tgħin biex tiżgura l-lonġevità u t-tħaddim sikur tal-muntatura tal-ħajt tat-TV tiegħek.

• Tindif: Imsaħ il-muntatura b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu, għax jistgħu jagħmlu ħsara lill-finitura.
• Kontrolli perjodiċi: Periodically check all screws and connections to ensure they remain tight and secure. If any looseness is detected, re-tighten them immediately.
• Spezzjoni tal-Ħsara: Inspect the mount for any signs of damage or wear. If any damage is found, do not use the mount and contact customer support.

Issolvi l-problemi

If you encounter issues with your Rocketfish TV wall mount, refer to the following common problems and solutions:

If the problem persists or is not listed here, please contact Rocketfish customer support.

Speċifikazzjonijiet

Garanzija u Appoġġ

Rocketfish products are designed for quality and reliability. For specific warranty information, please refer to the warranty card included with your product or visit the official Rocketfish website. If you require technical assistance, have questions about installation, or need to report missing/damaged parts, please contact Rocketfish customer support. Have your product model number (RF-TVMLPT03V3) and purchase information ready when contacting support.

You can often find support contact information on the Rocketfish official webis-sit jew permezz tal-bejjiegħ bl-imnut minn fejn xtrajt il-prodott.