TEEHO Fingerprint Door Lock User Manual

1. Introduzzjoni

This manual provides instructions for the installation, operation, and maintenance of your TEEHO Fingerprint Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The TEEHO Fingerprint Door Lock offers multiple access methods including fingerprint recognition, keypad codes, and traditional keys. It is designed for residential door security and keyless access control.

2. Kontenut tal-Pakkett

• Fingerprint Keypad Door Lock (Exterior and Interior Assemblies)
• 2 Passage Door Knobs / Levers
• Lukkett Deadbolt
• Strike Plate
• Ħardwer tal-Immuntar
• Keys (for emergency override)
• Mudell ta 'Installazzjoni

3. Setup u Installazzjoni

Before installation, ensure your door meets the required dimensions for compatibility.

Image: Diagram illustrating door compatibility and dimensions for installation, including backset (2-3/8" or 2-3/4"), door thickness (1-3/8" to 2"), and bore hole diameter (2-1/8").

3.1 Preparazzjoni tal-Bieb

1. Verify door thickness and backset measurement.
2. Use the provided template to mark and drill holes if necessary. The lock is suitable for 2-1/8" (54mm) door holes.

3.2 Installazzjoni tal-Deadbolt Latch

1. Insert the deadbolt latch into the door edge. Ensure the 'UP' arrow is pointing upwards.
2. Sikura bil-viti.

3.3 Installing the Exterior Assembly

1. Feed the cable through the door hole, below the deadbolt latch.
2. Align the exterior assembly with the deadbolt and door holes.

3.4 Installing the Interior Assembly

1. Qabbad il-kejbil mill-assemblaġġ ta 'barra mal-assemblaġġ ta' ġewwa.
2. Mount the interior assembly, ensuring proper alignment.
3. Sikura bil-viti tal-immuntar.

3.5 Installazzjoni tal-batterija

1. Neħħi l-għatu tal-batterija fuq l-assemblaġġ intern.
2. Insert 4 AA alkaline batteries (not included), observing polarity.
3. Ibdel l-għatu tal-batterija.

3.6 Installing Passage Door Levers

1. Install the passage door levers according to their specific instructions.

4. Istruzzjonijiet Operattivi

4.1 Il-Ftuħ tal-Marka tas-Swaba'

The lock features 3D biometric fingerprint recognition. It can recognize your fingerprint in approximately 0.3 seconds and unlock the door in 1 second.

1. Poġġi s-saba' rreġistrat tiegħek fuq is-senser tal-marki tas-swaba'.
2. The lock will unlock upon successful recognition.

Image: A person using their finger on the fingerprint sensor of the TEEHO door lock for quick unlocking.

4.2 Keyless Entry (Keypad)

The lock supports up to 20 access codes, each 4-10 digits long.

1. Enter your registered access code on the keypad.
2. Press the '#' key (or equivalent confirmation key).
3. Il-lock se jinfetaħ.

Anti-Peeping Password

To prevent others from guessing your code, you can enter random digits before or after your actual access code.

Image: Illustration of the anti-peep function, showing random digits entered before and after the actual password on the backlit keypad.

4.3 One-Time PIN Code

Generate a temporary PIN code for guests, cleaners, or delivery staff. This code will be automatically deleted after a single use.

Image: A person receiving a one-time PIN code on their phone for temporary access to the door.

4.4 Funzjoni ta' Serratura Awtomatika

The lock can be configured to automatically lock after a set period. This period can be adjusted between 10 and 99 seconds.

4.5 One-Touch Locking

To manually lock the door instantly, press and hold any key on the keypad for 2 seconds.

Image: Illustration showing the auto-lock function (10-99 seconds) and one-touch lock function (2 seconds hold) on the TEEHO door lock.

4.6 Karatteristiċi Addizzjonali

• Modalità Mute: Disables keypad sounds for quiet operation.
• Modalità Vacation: Enhances security when you are away for extended periods.
• Tastiera backlit: Ittejjeb il-viżibilità f'kundizzjonijiet ta' dawl baxx.

5. Manutenzjoni

5.1 Sostituzzjoni tal-batterija

The lock is powered by 4 AA batteries, providing up to 1 year of battery life. The lock features a low battery indicator.

Immaġni: Fuqview of lock features including 20 fingerprints, 20 user codes, auto-lock, IP54 waterproof rating, one-time PIN code, one-touch locking, low battery indicator, and up to 1 year battery life.

1. When the low battery indicator appears, replace all 4 AA batteries promptly.
2. Use new alkaline batteries for optimal performance.

5.2 Tindif

Imsaħ il-barra tas-serratura b'ċarruta ratba u damp drapp. Evita prodotti tat-tindif jew solventi li joborxu li jistgħu jagħmlu ħsara lill-finitura jew lill-komponenti elettroniċi.

5.3 Reżistenza għat-Temp

The lock has an IP54 weather resistance rating, providing protection against dust and splashing water. While durable, avoid direct exposure to heavy rain or prolonged submersion.

6 Issolvi l-problemi

• Is-serratura ma tirrispondix: Check battery level. Replace batteries if low. Ensure cables are securely connected.
• Marka tas-swaba' mhux rikonoxxuta: Ensure your finger is clean and dry. Try placing your finger at different angles. Re-register your fingerprint if issues persist.
• Keypad not working: Verify battery power. Ensure you are entering the correct code. Check for any physical damage to the keypad.
• Auto-lock not engaging: Check the auto-lock settings to ensure it is enabled and the delay time is set correctly.
• Is-serratura hija maħlula: Tighten mounting screws on both interior and exterior assemblies.

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

8.1 Informazzjoni dwar Garanzija

Specific warranty details are not provided within this manual. Please refer to the product packaging, the manufacturer's official website, or your purchase documentation for comprehensive warranty information.

8.2 Appoġġ għall-Klijent

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your TEEHO Fingerprint Door Lock, please contact TEEHO customer support through their official websit jew il-bejjiegħ bl-imnut minn fejn inxtara l-prodott.