YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch with 10G SFP User Manual

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch with 10G SFP. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Kontenut tal-Pakkett

Ivverifika li l-pakkett tiegħek fih l-oġġetti li ġejjin:

• 1 x YuanLey 8 Port 2.5G Ethernet Switch
• 1 x Kurduni tal-Enerġija
• 1 x Manwal għall-Utent

3. Karatteristiċi tal-prodott

• 9 Port Configuration: Includes 8 x 2.5 Gigabit Ethernet ports and 1 x 10G SFP+ Port.
• Prestazzjoni ta' Veloċità Għolja: Delivers 2.5 times faster network performance than traditional Gigabit switches, with a switching capacity of up to 60Gbps.
• Plug and Play: Unmanaged design requires no configuration for immediate use.
• Durable and Quiet: Features a metal case with 6KV lightning protection and a fanless design for silent operation.
• Temperatura Operattiva wiesgħa: Jaħdem b'mod affidabbli f'temperaturi li jvarjaw minn -10°C sa 50°C.
• Poġġiment versatili: Supports both wall mount and desktop placement.

4. Prodott Aktarview

Figure 4.1: YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch

Figura 4.2: Il-Panel ta' Quddiem Fuqview with Ports and Indicators

The switch features 8 RJ45 ports supporting 10/100/1000Mbps/2.5G adaptive speeds and 1 SFP+ port for 1G/2.5G/10G fiber connections. LED indicators provide status for power and link activity.

Figura 4.3: Il-Panel ta' Wara 'l Fuqview b'Input tal-Enerġija

Figura 4.4: Dettaljat View of Ports and Indicators

The rear panel includes the DC 12V/1.0A power input port and a grounding screw for electrical safety. The front panel LEDs indicate power status, 2.5Gbps link speed (orange), and 100/1000Mbps link speed (green) for RJ45 ports, and link status for the SFP+ port.

5. Setup

Follow these steps to set up your YuanLey Ethernet Switch:

1. Qabbad l-Enerġija: Plug the provided power adapter into the DC 12V/1.0A input port on the rear of the switch, then plug the adapter into a power outlet. The PWR LED on the front panel will illuminate green.
2. Qabbad l-Apparati Ethernet: Connect your network devices (e.g., computers, NAS, WiFi 6 APs, gaming PCs) to the 2.5G Base-T ports (1-8) using standard Ethernet cables (Cat5e or higher recommended for 2.5G speeds). The corresponding port LEDs will light up to indicate a successful connection and speed.
3. Connect SFP+ Module (Optional): If using the 10G SFP+ port, insert a compatible 1G/2.5G/10G SFP/SFP+ module (not included) into the SFP+ slot. Then, connect a fiber optic cable or DAC cable to the module. The SFP indicator LED will light up when a link is established.

Figure 5.1: Typical Network Setup with the YuanLey Switch

6. Tħaddim tas-Swiċċ

The YuanLey 2.5G Unmanaged Ethernet Switch is designed for simple plug-and-play operation. Once powered on and connected to your network devices, it will automatically detect the link speed and establish connections without any further configuration.

• Indikaturi LED: Observe the PWR, L1-L8, and SFP+ Link LEDs to monitor the switch's status and network activity.
• MDI/MDIX Awtomatiku: The switch supports Auto MDI/MDIX, eliminating the need for crossover cables.
• Adaptive Speed: RJ45 ports automatically adapt to 10/100/1000Mbps or 2.5Gbps.

7. Manutenzjoni

To ensure optimal performance and longevity of your switch, consider the following maintenance guidelines:

• Pjazzament: Place the switch in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. The fanless design relies on natural convection for cooling.
• Tindif: Naddaf il-barra tas-swiċċ perjodikament b'ċarruta ratba u niexfa. Evita li tuża prodotti tat-tindif likwidi jew aerosol.
• Ġestjoni tal-Kejbil: Kun żgur li l-kejbils tan-netwerk ikunu organizzati pulit u mhux mgħawġin jew imġebbda żżejjed.
• Provvista tal-Enerġija: Use only the original power adapter provided with the switch.

Figure 7.1: Fanless Design and Environmental Considerations

8 Issolvi l-problemi

If you encounter issues with your switch, refer to the following common problems and solutions:

• Ebda Qawwa:
  • Kun żgur li l-adapter tal-enerġija huwa konness sew mas-swiċċ u ma' sokit tal-enerġija li jaħdem.
  • Check if the PWR LED is illuminated. If not, try a different power outlet.
• Ebda Link/Attività fuq Port:
  • Ivverifika li l-kejbil Ethernet huwa konness sew kemm mal-port tas-swiċċ kif ukoll mal-apparat tan-netwerk.
  • Ipprova kejbil Ethernet differenti.
  • Kun żgur li l-apparat imqabbad ikun mixgħul u qed jaħdem sew.
  • Check the LED indicator for the specific port. If it's off, there might be no link.
• Veloċità baxxa tan-Netwerk:
  • Ensure all devices in the network path (NICs, cables, routers) support 2.5G speeds to achieve maximum performance.
  • Use Cat5e or higher-rated Ethernet cables for 2.5G connections.
  • Check the color of the port LED: Orange indicates 2.5Gbps, Green indicates 100/1000Mbps.
• SFP+ Port Issues:
  • Ensure the SFP/SFP+ module is correctly inserted and compatible with the switch.
  • Verify the fiber optic or DAC cable is properly connected and undamaged.
  • Check the SFP indicator LED for link status.

9. Speċifikazzjonijiet

Figura 9.1: Dimensjonijiet tal-Prodott

10. Garanzija u Appoġġ

YuanLey products are designed for reliability and performance. For warranty information and technical support, please refer to the official YuanLey webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek għal talbiet ta' garanzija.

Għal aktar għajnuna, tista' żżur il- YuanLey Store on Amazon.