Blackstar HT Stage MK III 60-watt 1x12 inch Guitar Tube Combo Amp Manwal għall-Utent

1. Introduzzjoni

The Blackstar HT Stage MK III 60-watt 1x12 inch Guitar Tube Combo Amp is a powerful and versatile amplifier designed for guitarists seeking rich, dynamic tube tone. This amplifier features a 60W tube power section, a 12-inch Celestion Seventy 80 speaker, and a comprehensive set of controls to shape your sound.

Key features include three channels with responsive overdrives, each with its own Voice switch, a boutique clean channel for pristine tones, and a power reduction switch that allows attenuation down to 10% of full wattage. It also incorporates CabRig speaker simulation for authentic cabinet emulation, a USB output for direct recording, an effects loop for pedal integration, and a built-in reverb with two selectable voices.

2. Informazzjoni dwar is-Sigurtà

TWISSIJA: Dan il-prodott fih kimiċi magħrufa mill-Istat ta' California li jikkawżaw kanċer u difetti fit-twelid jew ħsara riproduttiva oħra. Għal aktar informazzjoni, jekk jogħġbok żur www.P65Warnings.ca.gov.

Dejjem tiżgura l- amplifier is connected to a grounded power outlet. Do not expose the unit to rain or moisture. Refer to the serial number label on the back of the unit for specific electrical ratings. Always disconnect the power cord before cleaning or servicing. Ensure adequate ventilation around the amplifier biex jipprevjeni sħana żejda.

3. Setup

Follow these steps for initial setup of your Blackstar HT Stage MK III ampaktar ħaj:

Spakkjar: Neħħi bil-galbu amplifier and any accessories, including the 2-way footswitch, from the packaging. Inspect for any signs of damage.
Pjazzament: Poġġi l- amplifier on a stable, level surface, ensuring proper ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
Konnessjoni tal-Enerġija: Qabbad il-korda tal-enerġija fornuta mal- amplifier's mains input and then to a suitable grounded electrical outlet. Ensure the power switch is in the 'OFF' position before connecting.
Konnessjoni tal-Kitarra: Plug your guitar into the 'INPUT' jack on the front panel using a high-quality instrument cable.
Konnessjoni tas-Swiċċ tas-Saqajja: Connect the 2-way footswitch to the 'FOOTSWITCH' input on the rear panel for remote control of channels and other functions.
Qawwa Inizjali: Turn the 'POWER' switch to the 'ON' position. Allow a few moments for the tubes to warm up before engaging the 'STANDBY' switch.

Blackstar HT Stage MK III 60-watt 1x12 inch Guitar Tube Combo Amp quddiem view — Figura 3.1: Quddiem view of the Blackstar HT Stage MK III 60-watt 1x12 inch Guitar Tube Combo Amp.

Blackstar HT Stage MK III 60-watt 1x12 inch Guitar Tube Combo Amp rear panel connections — Figure 3.2: Rear panel connections of the Blackstar HT Stage MK III amplifier, showing mains input, speaker outputs, emulated output, effects loop, and footswitch input.

4. Istruzzjonijiet Operattivi

L-HT Stage MK III offers a wide range of tonal possibilities through its intuitive controls and versatile features.

4.1 Kontrolli ta' Front Panel

Input: Standard 6.35mm (1/4 inch) jack for connecting your guitar.
Kanal Nadif: Features a dedicated Volume control and a Voice switch for ultimate clean tone quality and flexibility.
Overdrive Channels: Three channels with individual Gain and Volume controls, each equipped with its own Voice switch for rich, responsive overdrives.
OD Equalisation (EQ): Controls for Treble, Middle, and Bass to sculpt the tone of your overdrive channels.
ISF (Karatteristika tal-Forma Infinita): This patented Blackstar control allows you to dial in tones from classic US to iconic UK ampkaratteristiċi tal-lifer.
Reverb: Built-in reverb with two selectable voices for adding depth and ambiance to your sound.
Volum Master: Jikkontrolla l-volum tal-output ġenerali tal- ampaktar ħaj.
Power Reduction Switch: Attenuates the amplifier's output power down to 10% of its full wattage, ideal for practice or lower volume settings without compromising tone.
Power/Standby Switches: Controls the main power and standby functions of the ampaktar ħaj.

Close-up of Blackstar HT Stage MK III ampkontrolli tal-pannell ta' quddiem tal-lifer — Figura 4.1: Dettaljat view of the front panel controls, including Clean, Overdrive, EQ, and Master sections.

Close-up of Blackstar HT Stage MK III ISF and OD Equalisation controls — Figure 4.2: Close-up of the ISF and OD Equalisation controls, demonstrating tonal shaping capabilities.

Close-up of Blackstar HT Stage MK III Voice switches and Power Reduction — Figure 4.3: Close-up of the revolutionary 'Voice' switches and the transparent power reduction feature.

4.2 Konnessjonijiet tal-Panew ta' wara

Riżultati tal-Ispeaker: Qabbad ma' kabinetti tal-ispikers esterni. Kun żgur li l-impedenza hija t-tqabbil korrett.
Emulated Output: Provides a direct output with CabRig speaker simulation for recording or connecting to a PA system.
Effetti Loop: Send and Return jacks for integrating external effects pedals.
Swiċċ tas-saqajn: Input for the included 2-way footswitch for channel switching.
Awdjo USB: Connect to a computer for direct recording and use with Blackstar Architect software.

Blackstar HT Stage MK III rear panel connections for speaker, effects loop, and USB — Figure 4.4: Rear panel connections, highlighting speaker outputs, effects loop, and USB audio port.

5. Manutenzjoni

Manutenzjoni xierqa tiżgura l-lonġevità u l-prestazzjoni ottimali tiegħek ampaktar ħaj.

Tindif: Uża drapp ratba u niexfa biex tnaddaf il-barra tal- ampEvita prodotti tat-tindif jew solventi li joborxu.
Kura tat-Tubi: Tubu amplifiers require occasional tube replacement. If you notice a decrease in performance, unusual noise, or loss of volume, consult a qualified technician for tube inspection and replacement.
Ventilazzjoni: Dejjem tiżgura l- amplifier has adequate airflow. Do not block ventilation openings.
Ħażna: Meta ma tkunx qed tużaha għal perjodi twal, aħżenha amplifier in a dry, temperature-controlled environment.

6 Issolvi l-problemi

Jekk tiltaqa' ma' problemi bil- amplifier, try these basic troubleshooting steps:

Ebda Qawwa: Check the power cord connection, wall outlet, and the amplifier's power and standby switches. Ensure the fuse is intact.
Ebda Ħsejjes: Verify your guitar is properly connected. Check all cable connections (guitar, speaker, effects loop). Ensure master volume is turned up and channel volumes are not at zero. Check the standby switch.
Poor Sound Quality/Noise: Inspect all cables for damage. Try a different guitar cable. If using effects pedals, bypass them to see if the issue persists. Tubes may need replacement if the sound is weak or distorted.
Is-Swiċċ tas-Saqajk Mhux Jaħdem: Ensure the footswitch cable is securely connected to the correct input on the rear panel.

For persistent issues, contact Blackstar customer support or a qualified service technician.

7. Speċifikazzjonijiet

Karatteristika	Speċifikazzjoni
Numru tal-Mudell	HTV60112MK3
Output Wattage	60 Watts (Tube)
Speaker	1x12 inch Celestion Seventy 80
Kanali	3 (Clean, Overdrive 1, Overdrive 2)
Tnaqqis tal-Qawwa	Down to 10% of full wattage
Simulazzjoni tal-Ispeaker	CabRig
Konnettività	USB Audio, Effects Loop, 6.35mm Jack
Reverb	Built-in with two selectable voices
Piż tal-oġġett	62.5 liri
Dimensjonijiet tal-Prodott	28.94 x 14.76 x 24.3 pulzieri
Kulur	Iswed
Materjal	Plastik

Blackstar HT Stage MK III amplifier bid-dimensjonijiet immarkati — Figure 7.1: Dimensions of the Blackstar HT Stage MK III 60-watt 1x12 inch Guitar Tube Combo Amp.

8. Garanzija u Appoġġ

For warranty information, product registration, and technical support, please visit the official Blackstar webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta’ garanzija.

Blackstar is committed to providing high-quality products and excellent customer service. If you have any questions or require assistance, please do not hesitate to reach out to their support team.

	Kitarra Blackstar HT Venue MK III AmpManwal ta 'l-Utent aktar ħaj Manwal komprensiv għall-utent għall-kitarra tas-serje Blackstar HT Venue MK III ampmodifikaturi, karatteristiċi ta' dettalji, kontrolli tal-pannelli ta' quddiem u ta' wara, struzzjonijiet ta' sigurtà, u speċifikazzjonijiet tekniċi għall-mudelli HT Stage 60 112, HT Stage 60 212, u HT Stagu 100.
	Headphones tal-Kitarra Blackstar BEAM SOLO AmpManwal ta 'l-Utent aktar ħaj Manwal komprensiv għall-utent għall-headphones portabbli tal-kitarra Blackstar BEAM SOLO amplifier, dettalji dwar il-karatteristiċi, il-kontrolli, il-konnettività, l-integrazzjoni tal-app, l-istruzzjonijiet tas-sigurtà, u l-ispeċifikazzjonijiet tekniċi.
	Kitarra Blackstar HT-5 AmpManwal tas-Sid tal-Lifer - Karatteristiċi, Speċifikazzjonijiet, u Sigurtà Manwal uffiċjali tas-sid għall-kitarra Blackstar HT-5 amplifier. Ikopri struzzjonijiet ta' sigurtà, kontrolli tal-pannell ta' quddiem u ta' wara, speċifikazzjonijiet tekniċi, karatteristiċi, u informazzjoni importanti dwar l-operat.
	Blackstar BEAM SOLO Owner's Manual: Guitar Headphone Ampaktar ħaj Comprehensive owner's manual for the Blackstar BEAM SOLO portable guitar headphone amplifier. Learn about features, controls, connectivity, safety, and specifications.
	Headphones tal-Kitarra Blackstar BEAM SOLO Amplifier Manwal tas-Sid Manwal komprensiv tas-sid għall-headphones tal-kitarra Blackstar BEAM SOLO amplifier, dettalji tal-karatteristiċi, kontrolli, struzzjonijiet ta' sigurtà, konnettività tal-app mobbli, u speċifikazzjonijiet tekniċi.
	Kitarra Blackstar HT-1 Amplifier Manwal tas-Sid Comprehensive owner's manual for the Blackstar HT-1 guitar amplifier, covering safety instructions, features, front and rear panel controls, and technical specifications. Includes multilingual safety information and operational guidance.

Blackstar HTV60112MK3