SPLITSKY NZFS Kids Alarm Clock

1. Introduzzjoni

Thank you for choosing the SPLITSKY NZFS Kids Alarm Clock. This device combines an alarm clock, white noise sleep aid, and an 8-mode RGB night light, designed to assist with sleep and wake-up routines for children and adults. Please read this manual thoroughly to understand its features and ensure proper operation.

Informazzjoni dwar is-Sigurtà:

• Żomm l-apparat 'il bogħod mill-ilma u minn ambjenti b'umdità għolja.
• Tippruvax iżarma jew isewwi l-apparat lilek innifsek.
• Use only the provided USB-C power cable or a certified equivalent.
• Żgura ventilazzjoni xierqa madwar l-apparat.

2. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• SPLITSKY NZFS Kids Alarm Clock
• 1.2M (4.7 inch) USB-C Power Cable
• Manwal għall-Utent (dan id-dokument)
• 1 x CR2032 Lithium Ion Battery (pre-installed for memory backup)

Image: The SPLITSKY NZFS Kids Alarm Clock, a USB-C power cable, and the user manual are included in the package.

3. Prodott Aktarview

Iffamiljarizza ruħek mal-buttuni u l-portijiet fuq l-arloġġ tal-allarm tiegħek:

Immaġni: Dettaljata view of the alarm clock's top buttons and side ports, including Alarm 1, Time Setting, Light Minus/Settings, Snooze/Light Mode Switch, Light Plus/Setup, Music Switch, Alarm 2, Volume Setting, Time Brightness Setting, USB Output Charging Port, and Type-C Input Interface.

• Buttuna ta' Allarm 1: Set and activate Alarm 1.
• Buttuna tal-Issettjar tal-Ħin: Aġġusta l-ħin kurrenti.
• Light Minus / Settings Button: Decrease light brightness or navigate settings.
• Snooze / Light Mode Switch Button: Activate snooze, or cycle through light modes.
• Light Plus / Setup Button: Increase light brightness or confirm settings.
• Music Switch Button: Cycle through white noise sounds.
• Buttuna ta' Allarm 2: Set and activate Alarm 2.
• Volume Setting Wheel (Side): Adjust alarm and white noise volume.
• Time Brightness Setting Wheel (Side): Aġġusta l-luminożità tal-wiri.
• USB Output Charging Port (Side): Charge external devices.
• Type-C Input Interface (Side): Connect power cable to the alarm clock.

4. Setup

4.1 Konnessjoni tal-Enerġija

1. Connect the provided USB-C power cable to the Type-C Input Interface on the side of the alarm clock.
2. Ipplaggja t-tarf l-ieħor tal-kejbil USB-C ma' adapter tal-enerġija USB kompatibbli (mhux inkluż) jew ma' port USB.
3. Id-displej se jixgħel, u jindika li l-arloġġ huwa mixgħul.

Image: The SPLITSKY NZFS Kids Alarm Clock is shown powered on and connected via its USB-C port, also demonstrating its capability to charge a smartphone.

4.2 Battery Installation (Memory Backup)

The alarm clock includes a pre-installed CR2032 battery. This battery serves as a memory backup to retain time and alarm settings during a power outage or when the main power is disconnected. It does not power the clock for regular operation.

• If the battery needs replacement, locate the battery compartment on the back of the unit.
• Uża tornavit żgħir biex tiftaħ il-kompartiment.
• Ibdel b'batterija CR2032 ġdida, filwaqt li tiżgura polarità korretta.
• Agħlaq il-kompartiment sew.

5. Istruzzjonijiet Operattivi

5.1 Setting the Time (12H/24H Format)

1. Agħfas u żomm il- Buttuna tal-Issettjar tal-Ħin until the hour digits begin to flash.
2. Uża l- Light Minus / Settings Button (l isfel) jew Light Plus / Setup Button (up) to adjust the hour.
3. Agħfas il- Buttuna tal-Issettjar tal-Ħin again to move to minute adjustment. Adjust minutes using the Light Minus/Plus buttons.
4. Agħfas il- Buttuna tal-Issettjar tal-Ħin a third time to select 12-hour or 24-hour format. Adjust using the Light Minus/Plus buttons.
5. Agħfas il- Buttuna tal-Issettjar tal-Ħin għal darb'oħra biex tikkonferma u toħroġ mill-modalità tal-issettjar tal-ħin.

5.2 Setting Alarms (Dual Alarm, Daily/Weekday/Weekend Mode)

L-arloġġ jappoġġja żewġ allarmi indipendenti (Allarm 1 u Allarm 2).

1. Agħfas u żomm il- Buttuna ta 'l-Allarm 1 (għall-Allarm 1) jew Buttuna ta 'l-Allarm 2 (for Alarm 2) until the alarm hour digits flash.
2. Uża l- Light Minus / Settings Button or Light Plus / Setup Button biex taġġusta s-siegħa.
3. Press the respective Alarm Button again to move to minute adjustment. Adjust minutes using the Light Minus/Plus buttons.
4. Press the respective Alarm Button again to select the alarm mode:
• Modalità ta' Kuljum: L-allarm idoqq kuljum.
• Weekday Mode: L-allarm idoqq mit-Tnejn sal-Ġimgħa.
• Weekend Mode: L-allarm idoqq is-Sibt u l-Ħadd.
5. Press the respective Alarm Button once more to confirm and exit alarm setting mode.
6. Biex tattiva/tiddiżattiva allarm, agħfas fil-qosor il-buttuna Buttuna ta 'l-Allarm 1 or Buttuna ta 'l-Allarm 2Ikona ta' allarm tidher/tisparixxi fuq id-displej.

5.3 Funzjoni Snooze

When an alarm sounds, tap the Snooze / Light Mode Switch Button on top to activate snooze. The alarm will pause for 9 minutes and then sound again. This can be repeated multiple times.

5.4 Night Light (8 Modes RGB, 10-level dimming)

The alarm clock features 6 solid color lights and 2 ambient colorful lights.

1. Agħfas qasir il- Snooze / Light Mode Switch Button to turn on the night light and cycle through the 8 color modes.
2. To adjust the brightness (10 levels), use the Light Minus / Settings Button or Light Plus / Setup Button while the night light is active.
3. To turn off the night light, continue pressing the Snooze / Light Mode Switch Button sakemm id-dawl jintefa.

Image: Multiple SPLITSKY NZFS Kids Alarm Clocks are shown, each displaying a different color from the 8 available RGB night light modes.

5.5 White Noise Sleep Aid (8 Sounds)

The clock offers 8 soothing sounds to aid sleep.

1. Agħfas qasir il- Buttuna tal-Iswiċċ tal-Mużika to turn on the white noise and cycle through the available sounds.
2. To adjust the volume (16 levels), use the Volume Setting Wheel on the side of the clock.
3. To turn off the white noise, continue pressing the Buttuna tal-Iswiċċ tal-Mużika until the sound stops.

Image: The SPLITSKY NZFS Kids Alarm Clock is displayed on a bedside table, with icons illustrating the various white noise options such as rain, cicadas, piano, bonfire, waves, birdsong, and church bells.

5.6 Sleep Timer (10-120 minutes)

The sleep timer allows you to set a duration for the white noise and/or night light to play before automatically turning off.

1. While white noise or night light is active, press and hold the Buttuna tal-Iswiċċ tal-Mużika (for white noise timer) or Snooze / Light Mode Switch Button (for light timer).
2. Uża l- Light Minus / Settings Button or Light Plus / Setup Button to select the desired timer duration (10, 20, 30, 60, 90, 120 minutes).
3. Press the respective button again to confirm the timer setting. The timer icon will appear on the display.

5.7 Aġġustament tal-luminożità tal-wiri

Adjust the brightness of the LED time display using the Time Brightness Setting Wheel on the side of the clock.

5.8 Port tal-Iċċarġjar tal-USB

The USB output charging port on the side of the alarm clock can be used to charge other small electronic devices, such as smartphones. Connect your device's charging cable to this port.

6. Manutenzjoni

6.1 Tindif

• Kun żgur li l-apparat ikun splaggjat qabel it-tindif.
• Imsaħ il-wiċċ b'ċarruta ratba u niexfa.
• Tużax prodotti tat-tindif li joborxu, solventi, jew sprejs kimiċi.

6.2 Ħażna

When not in use for extended periods, store the alarm clock in a cool, dry place, away from direct sunlight and extreme temperatures.

7 Issolvi l-problemi

If you encounter issues with your SPLITSKY NZFS Kids Alarm Clock, refer to the table below for common problems and solutions.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

9.1 Informazzjoni dwar Garanzija

Please refer to the warranty information provided at the time of purchase or contact your retailer for details regarding the product warranty. Keep your proof of purchase for any warranty claims.

9.2 Appoġġ għall-Klijent

For technical assistance, troubleshooting beyond this manual, or general inquiries, please contact the seller through the platform where you purchased the product. Provide your order number and a detailed description of the issue for prompt support.