Introduzzjoni
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your tectake Vivara Pavilion. Designed for outdoor use, this 6 x 3 meter pavilion offers practical shade and shelter. Please read this manual thoroughly before assembly and use to ensure safe and correct operation.
Istruzzjonijiet tas-Sigurtà
- Dejjem arma l-paviljun fuq wiċċ ċatt u stabbli.
- Ensure all frame connections are securely fastened before attaching the canvas.
- Use all provided tensioning ropes and pegs to anchor the pavilion firmly to the ground. Failure to do so may result in damage or injury, especially in windy conditions.
- Do not use the pavilion in extreme weather conditions, such as strong winds, heavy rain, or snow. Disassemble and store the pavilion during such conditions.
- Keep all flame and heat sources away from the pavilion fabric. The fabric is not fireproof.
- Regularly inspect the pavilion for any signs of wear, damage, or loose connections. Do not use if damaged.
- Supervise children around the pavilion to prevent accidents.
Kontenut tal-Pakkett
Please verify that all components listed below are present in your package before beginning assembly. If any parts are missing or damaged, contact customer support.
- Pavilion structure (powder-coated steel frame)
- Pavilion canvas (polyethylene fabric)
- 5 pannelli tal-ġenb li jistgħu jitneħħew bit-twieqi
- 6 tensioning ropes
- 12 imsiemer tal-art
- Assembly manual (this document)
Setup Istruzzjonijiet
Follow these steps carefully for proper assembly of your Vivara Pavilion. It is recommended that at least two people assist with the assembly.
- Ħoll il-Komponenti: Lay out all frame pieces, connectors, canvas, side panels, ropes, and pegs on a clear, flat area.
- Arma l-Qafas: Connect the steel poles according to the included diagram (not provided in this text, refer to physical manual if available). Ensure all connections are secure and click into place.
Image: The robust powder-coated steel frame of the pavilion, ready for the canvas.
- Attach the Canvas Roof: Carefully drape the polyethylene canvas over the assembled frame. Ensure the canvas is centered and evenly distributed. Secure the canvas to the frame using any integrated fasteners or ties.
- Installa l-Panelli tal-Ġenb: Attach the five removable side panels to the pavilion frame. Each panel features large windows and secures to the legs using Velcro closures. You can choose to install all panels, some, or none, depending on your needs.
Image: The Vivara Pavilion with its side panels, demonstrating their flexibility and the large window design.
- Secure with Ropes and Pegs: Once the pavilion is fully assembled, use the 6 tensioning ropes and 12 ground pegs to firmly anchor the pavilion to the ground. Attach ropes to designated points on the frame and secure pegs into the soil at an angle for maximum stability.
Image: Essential components for securing the pavilion: tensioning ropes and ground pegs.
Image: Detail of the frame connection, Velcro attachment for side panels, and the base plate for ground anchoring.
Image: The Vivara Pavilion fully assembled, providing ample shade and shelter.
Operazzjoni
The Vivara Pavilion is designed for versatile outdoor use, providing shade and shelter from light rain and wind. Its primary function is to create a comfortable outdoor space for events, gatherings, or relaxation.
- Shade and UV Protection: The canvas provides UVA protection of 30+, offering a shaded area from direct sunlight.
- Weather Shelter: The waterproof canvas offers protection against light rain and wind. For heavy rain or strong winds, it is recommended to disassemble the pavilion.
- Adjustable Side Panels: The five removable side panels allow you to customize the level of enclosure and airflow. They can be easily attached or removed using their Velcro closures.
Manutenzjoni u Kura
Manutenzjoni xierqa testendi l-ħajja tal-paviljun tiegħek.
- Tindif: Clean the polyethylene canvas and side panels with mild soap and water. Do not use harsh chemicals or abrasive cleaners. Rinse thoroughly and allow to air dry completely before storage.
- Kura tal-qafas: Imsaħ il-qafas tal-azzar miksi bit-trab b'reklamaramp cloth. Inspect for any rust or damage, especially at joints.
- Ħażna: When not in use for extended periods, or during adverse weather, disassemble the pavilion and store all components in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure all parts are clean and dry before storage to prevent mold or corrosion.
- Spezzjoni regolari: Periodically check all connections, ropes, and pegs for wear, damage, or looseness. Replace any worn or damaged parts immediately.
Issolvi l-problemi
This section addresses common issues you might encounter with your pavilion.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Pavilion is unstable or sways in light wind. | Insufficient anchoring; ropes or pegs not properly secured. | Ensure all 6 tensioning ropes are taut and all 12 pegs are firmly driven into the ground at an angle. Consider additional weights or anchors in very windy areas. |
| Ilma jinġabar fuq is-saqaf. | Canvas not taut enough; improper assembly. | Re-adjust the canvas to ensure it is stretched tightly over the frame. Verify all frame connections are fully engaged. |
| Difficulty attaching side panels. | Panels misaligned; Velcro not properly engaged. | Ensure panels are oriented correctly. Press Velcro strips firmly together along the entire length. |
| Frame components do not fit together. | Incorrect orientation of parts; debris in connectors. | Double-check the assembly diagram (if available). Clear any obstructions from the connection points. Ensure you are using the correct pieces for each joint. |
Speċifikazzjonijiet Tekniċi
| Dimensjonijiet ġenerali (L x W x H) | approx. 600 x 300 x 250 cm (236.22 x 118.11 x 98.43 inches) |
| Għoli tal-Pass | approx. 200 cm (78.74 inches) |
| Dijametru tas-Sieq | approx. 3 cm (1.18 inches) |
| Canvas Thickness | 95 g/m² |
| UVA Protection | 30+ |
| Piż | approx. 12 kg (26.4 pounds) |
| Materjali | Powder-coated steel (frame), Polyethylene (canvas), Polypropylene (ropes) |
| Livell ta 'Reżistenza għall-Ilma | Waterproof |
| Kulur | Griż |
Informazzjoni dwar Garanzija
Specific warranty terms and conditions for the tectake Vivara Pavilion are typically provided at the point of purchase or can be found on the official tectake website. Please retain your proof of purchase for any warranty claims. Warranty coverage generally applies to manufacturing defects and does not cover damage resulting from improper assembly, misuse, neglect, or extreme weather conditions.
Appoġġ għall-Klijent
For further assistance, questions, or to report missing/damaged parts, please contact tectake customer support. You can find contact information and additional resources on the official tectake webis-sit jew permezz tal-bejjiegħ bl-imnut minn fejn xtrajt il-prodott.
Visit the tectake Store: tectake Official Store
