Intex Dura-Beam Extra Raised Airbed User Manual

Introduzzjoni

This manual provides essential instructions for the safe and efficient use of your Intex Dura-Beam Extra Raised Airbed. Please read all instructions carefully before setup and retain this manual for future reference. The Intex Dura-Beam Extra Raised Airbed offers enhanced comfort and convenience with its soft, velvety sleeping surface, stable edge support, and durable Fiber-Tech construction.

Figure 1: Intex Dura-Beam Extra Raised Airbed, Queen Size.

Linji Gwida dwar is-Sigurtà

• Do not use near open flames or heaters.
• Keep sharp objects away from the airbed to prevent punctures.
• Ensure the power cord is not a tripping hazard during inflation/deflation.
• Dan il-prodott mhuwiex maħsub għall-użu minn tfal taħt it-3-il sena.
• Do not stand or jump on the airbed.
• Maximum weight capacity is 600 pounds (272 kg). Do not exceed this limit.

Kontenut tal-Pakkett

Your Intex Dura-Beam Extra Raised Airbed package includes:

• 1 x Intex Dura-Beam Extra Raised Airbed with Built-in Electric Pump
• 1 x Carry Bag

Setup & Inflazzjoni

1. Ippakkja: Remove the airbed from its carry bag and unroll it on a clean, level surface free of sharp objects.
2. Locate the Pump: Find the built-in electric pump on the side of the airbed. Open the cord storage holder.
3. Ipplaggja: Plug the power cord into a standard electrical outlet (110-120V).
4. Nefħa: Turn the pump knob clockwise to the "INFLATE" position. The airbed will begin to inflate.
5. Immonitorja l-Inflazzjoni: Allow 3 to 5 minutes for full inflation. The pump should not operate continuously for more than 4 minutes. If continuous operation is needed, allow the pump to rest for 15 minutes between two full inflating cycles to prevent overheating.
6. Aġġusta s-Sodezza: Once fully inflated, turn the knob counter-clockwise to "OFF". You can adjust the firmness by adding or releasing small amounts of air.
7. Korda tal-Ħanut: Unplug the cord from the outlet and place it back into the cord storage holder, then close the cover.

Figure 2: Airbed dimensions (80"L x 60"W x 20"Th).

Video 1: Official Intex Airbed Instructional Video demonstrating inflation and deflation.

Deflazzjoni u Ħażna

1. Ipprepara għad-Deflazzjoni: Ensure nothing is on top of the airbed.
2. Ipplaggja: Take out the cord from its storage compartment and plug it into a power source.
3. Neflaħ: Turn the pump knob counter-clockwise to the "DEFLATE" position. The airbed will begin to deflate.
4. Assist Deflation: To remove all remaining air, you may gently roll the airbed from the opposite end towards the pump.
5. Aħżen: Once fully deflated, turn the knob to "OFF", unplug the cord, store it, and fold the airbed neatly. Place it in the provided carry bag.

Figure 3: The included carry bag for easy storage and transport.

Usage & Comfort

The Intex Dura-Beam Extra Raised Airbed is designed for optimal comfort and stability:

• Għoli Mgħolli: At 20 inches high, the airbed provides an elevated sleeping surface, making it easier to get on and off, similar to a traditional bed.
• Velvety Surface: The soft, flocked top surface enhances comfort and helps to keep bedding in place.
• Edge Support: The edge banded outer perimeter offers additional stability and support across the entire sleeping area.
• Kostruzzjoni tal-Fiber-Tech: Internal Fiber-Tech construction provides improved durability and support, ensuring a stable and comfortable sleep experience.

Figure 4: Close-up of the airbed's soft, velvety sleeping surface.

Figure 5: Illustration showing Dura-Beam construction prevents dipping compared to traditional airbeds.

Manutenzjoni

• Tindif: Spot clean the airbed with a damp drapp u sapun ħafif. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
• Tnixxif: Ensure the airbed is completely dry before folding and storing to prevent mold or mildew.
• Ħażna: Store the airbed in a cool, dry place, away from direct sunlight and extreme temperatures.
• Evita Oġġetti li jaqtgħu: Always inspect the area where the airbed will be placed for any sharp objects that could cause punctures.

Issolvi l-problemi

Airbed Appears to Be Leaking

It is common for new airbeds to appear to lose air during the first few uses. This is typically due to the material stretching, not a leak. The material will stretch and settle over the first 2-3 nights of use. Simply re-inflate the bed as needed until it reaches its desired firmness and the material has fully settled.

Figure 6: Explanation of material stretch, which can be misinterpreted as air leakage.

Titqib

In the event of an actual puncture, use a repair patch (not included in product details, but often provided with airbeds or available separately) to seal the hole. Clean the area around the puncture, apply the patch firmly, and allow it to cure for at least 20 minutes before re-inflating.

Figure 7: Fiber-Tech material offers enhanced strength and support compared to traditional materials.

Speċifikazzjonijiet tal-Prodott

Garanzija u Appoġġ

This Intex Dura-Beam Extra Raised Airbed comes with a limited manufacturer's warranty. For specific details regarding warranty coverage, claims, or product support, please refer to the documentation included with your purchase or visit the official Intex websit.