Manwal tal-Utent tal-Kit tal-Karozza tad-Drift Yokomo MDR-010P Edizzjoni Limitata Master Drift 1/10 RWD

1. Introduzzjoni

This manual provides comprehensive instructions for the assembly, operation, and maintenance of the Yokomo MDR-010P Limited Edition Master Drift 1/10 RWD Drift Car Kit. The MDR-010P incorporates advanced drift technology and extensive adjustability, designed for competitive drifting. This kit requires assembly and additional components to be fully operational.

The Yokomo MD 1.0 Master Drift 1/10 2WD RWD Drift Car Kit features the latest drift technology, leveraging years of Yokomo's drifting experience. It includes innovative features such as graphite suspension arms, a first for drift cars, indicating its race-inspired design. The vehicle offers extensive adjustability for car width, skid angle, roll center, camber, toe, and more, allowing precise tuning for various track conditions. It comes with a three-gear transmission for positive torque, with an optional four-gear conversion for a more neutral setup.

2. Karatteristiċi ewlenin

• Limited Edition Purple: Distinctive color anodized main aluminum parts.
• RWD Gear Drive: Optimized for rear-wheel drive drifting.
• Aluminum Shock Towers: Durable front and rear aluminum shock towers.
• Lightweight Graphite Shorty Battery Holder: Designed for optimal weight distribution.
• 5mm Graphite Suspension Arms: Enhanced durability and performance.
• Differential Height Adjustment: Three levels of adjustment for tuning.
• Adjustable Motor Position: Thirteen levels of adjustment for motor placement.
• Aluminum Rod End Adapter: For precise linkage adjustments.
• Big Bore Aluminum Low Friction Shocks: For superior dampprestazzjoni.
• Updated Ultra-Lightweight Slide Rack Steering: Provides precise steering response.
• Graphite Upper Deck: Adds rigidity and reduces weight.
• Graphite Rear ESC Mount: Maximizes traction by optimizing ESC placement.
• Graphite Flat Body Mount: Secure and lightweight body mounting.

3. Informazzjoni dwar is-Sigurtà

Always operate the RC car in a safe and responsible manner. Failure to follow safety guidelines can result in injury or damage to property.

• Aqra l-manwal kollu qabel l-assemblaġġ u t-tħaddim.
• Żomm idejk, wiċċek, u ħwejjeġ maħlula 'l bogħod mill-partijiet li jiċċaqalqu.
• Tħaddimx ħdejn nies, annimali domestiċi, jew ostakli.
• Ensure batteries are charged safely and correctly.
• Use only genuine Yokomo parts or approved accessories.
• Dan il-prodott fih kimiċi magħrufa mill-Istat ta' California li jikkawżaw kanċer u difetti fit-twelid jew ħsara riproduttiva oħra (twissija tal-Propożizzjoni 65).
• Recommended age for operation is 14 months and up, but adult supervision is highly recommended for younger users due to the complexity and speed of the model.

4. Package Contents & Needed to Complete

The Yokomo MDR-010P is a kit that requires assembly. The package contains the components for the chassis. Additional items are required to complete the model and make it operational.

Items Not Included (Needed to Complete):

• Radio system (transmitter and receiver)
• Servo ta' l-istering
• Kontrollur Elettroniku tal-Veloċità (ESC)
• Mutur
• Pakkett tal-batterija u ċarġer
• Drift tires and wheels
• RC car body
• Assembly tools (e.g., hex wrenches, screwdrivers, pliers)
• Adhesives and lubricants (e.g., threadlock, shock oil)

5. Setup u Assemblea

Follow the detailed assembly instructions provided in the separate assembly manual included with your kit. This section provides general guidance and highlights key adjustment points.

Passi tal-Assemblea Ġenerali:

1. Assemblaġġ tax-Chassis: Begin by assembling the carbon fiber main chassis and upper deck.
2. Installazzjoni tas-Sospensjoni: Attach the graphite suspension arms, aluminum shock towers, and big bore aluminum low friction shocks. Pay attention to shock oil viscosity and spring rates for desired damping.
3. Drivetrain Assembly: Install the RWD gear drive system. Ensure all gears mesh smoothly.
4. Sistema ta' Tmexxija: Assemble the ultra-lightweight slide rack steering system and install the steering servo. Ensure smooth, bind-free movement.
5. Installazzjoni Elettronika: Mount the motor, ESC (on the graphite rear ESC mount), receiver, and battery (in the graphite shorty battery holder). Route wires neatly to avoid interference with moving parts.
6. Wheel and Tire Mounting: Mount your chosen drift tires onto the wheels and attach them to the chassis.
7. Body Mounting: Secure your RC car body using the graphite flat body mounts.

Aġġustamenti Inizjali:

• Camber and Toe: Adjust front and rear camber and toe settings using the aluminum rod end adapters for optimal drift characteristics.
• Għoli tar-rikba: Set the ride height using the shock collars to achieve desired ground clearance and suspension travel.
• Differential Height: Experiment with the 3-level differential height adjustment to fine-tune traction and power delivery.
• Motor Position: Adjust the motor position (13 levels) to influence weight distribution and torque characteristics.
• Transmission Setup: The kit comes with a three-gear transmission. Consider the optional four-gear conversion for different torque characteristics if desired.

Figura 1: Assembled Yokomo MDR-010P Master Drift Chassis.

This image displays the assembled chassis of the Yokomo MDR-010P Master Drift car kit. It highlights the purple anodized aluminum components, including the shock towers, suspension arms, and motor mount, contrasted with the black carbon fiber main chassis and upper deck. The RWD gear drive system and big bore aluminum low friction shocks are visible. The car is shown without its body shell, revealing the intricate internal structure and component layout.

6. Istruzzjonijiet Operattivi

Once assembled and all electronics are properly installed and calibrated, your Yokomo MDR-010P is ready for operation.

Lista ta' Kontroll ta' Qabel l-Operazzjoni:

• Ensure all screws are tightened and components are secure.
• Check battery charge levels for both the car and transmitter.
• Verify steering and throttle response are correct and calibrated with your radio system.
• Inspect tires for proper mounting and wear.
• Choose a suitable, open area free from obstacles, people, and water.

Operazzjoni Bażika:

1. Turn on the transmitter first, then the car's ESC.
2. Gently apply throttle to move the car forward. Practice smooth throttle control for drifting.
3. Use the steering wheel on your transmitter to control direction.
4. Practice initiating and maintaining drifts. The RWD setup requires precise throttle and steering inputs.
5. When finished, turn off the car's ESC first, then the transmitter.

7. Manutenzjoni

Regular maintenance will ensure the longevity and optimal performance of your MDR-010P.

• Tindif: After each use, clean the chassis and components to remove dirt, dust, and debris. Use a soft brush or compressed air.
• Spezzjoni: Regularly inspect all screws, nuts, and bolts for tightness. Check for any worn or damaged parts, especially suspension components, gears, and bearings.
• Lubrikazzjoni: Apply appropriate lubricants to moving parts as recommended in the assembly manual. Do not over-lubricate.
• Xokkijiet: Check shock oil levels and replace if necessary. Inspect O-rings for leaks.
• Tajers: Inspect tires for wear and replace when traction diminishes.
• Elettronika: Keep electronics clean and dry. Ensure connectors are secure.
• Ħażna: Store the car in a clean, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.

8 Issolvi l-problemi

This section addresses common issues you might encounter with your MDR-010P.

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

For specific warranty information and technical support, please refer to the documentation included with your purchase or visit the official Yokomo websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

Yokomo Official Websit: www.teamyokomo.com

For replacement parts or further assistance, contact your authorized Yokomo dealer or distributor.