Manwal tal-Utent tad-Dispenser tas-Sapun Imwaħħal mal-Ħajt Sensea Emmy

Introduzzjoni

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Sensea Emmy wall-mounted soap dispenser. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

Informazzjoni dwar is-Sigurtà

• Ensure all mounting hardware is securely fastened to prevent the dispenser from falling.
• Do not overtighten screws, as this may damage the product or mounting surface.
• Żomm fejn ma jintlaħaqx mit-tfal waqt l-installazzjoni.
• Use appropriate tools for drilling and mounting.

Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• 1x Sensea Emmy Soap Dispenser Unit (Glass bottle with pump)
• 1x Wall Mounting Bracket (Zamak, Chrome-plated steel)
• 2x Viti tal-Immuntar
• 2x Wall Plugs/Anchors

Image: The Sensea Emmy soap dispenser in its original packaging, illustrating the main unit, wall mount, and included hardware (screws and wall plugs). Key dimensions are also visible: width 121mm, height 170mm, and projection from wall 96mm.

Setup u Installazzjoni

The Sensea Emmy soap dispenser is designed for wall mounting using the provided screws and wall plugs.

1. Agħżel Post: Choose a suitable wall location, ensuring it is at a convenient height and away from direct water spray if possible.
2. Immarka l-Punti tat-Tħaffir: Hold the wall mounting bracket against the wall at the desired height. Use a pencil to mark the two drilling points through the holes on the bracket.
3. Drill toqob: Using an appropriate drill bit for your wall type (e.g., masonry bit for concrete/brick, wood bit for studs), drill holes at the marked points. Ensure the depth is sufficient for the wall plugs.
4. Daħħal il-Plakkijiet tal-Ħajt: Insert the provided wall plugs into the drilled holes. Tap gently with a hammer if necessary until they are flush with the wall surface.
5. Waħħal il-Bracket: Align the wall mounting bracket with the inserted wall plugs. Insert the screws through the bracket holes and tighten them firmly into the wall plugs. Do not overtighten.
6. Dispenser tal-Muntanja: Carefully slide the glass soap dispenser bottle into the chrome-plated holder on the mounted bracket. Ensure it is seated securely.

Dimensions for Installation Planning:

• Overall Width: Approximately 121 mm
• Overall Height: Approximately 170 mm
• Projection from Wall (Depth): Approximately 96 mm

Istruzzjonijiet Operattivi

1. Mili tad-Dispenser:
   • Remove the pump mechanism by unscrewing it counter-clockwise from the glass bottle.
   • Pour your preferred liquid soap or lotion into the glass bottle. Do not overfill.
   • Screw the pump mechanism back onto the bottle clockwise until secure.
2. Tqassim tas-Sapun:
   • Place your hand under the nozzle.
   • Press down firmly on the pump head to dispense soap.
   • Release the pump head to allow it to return to its original position.

Manutenzjoni

Regular cleaning will help maintain the appearance and functionality of your soap dispenser.

• Tindif ta' barra: Wipe the chrome-plated surfaces and glass bottle with a soft, damp drapp. Uża tindif ħafif u mhux abrażiv jekk meħtieġ.
• Tindif tal-Pompa: If the pump becomes clogged or sticky, remove it from the bottle and rinse it thoroughly under warm water. You can pump warm water through the mechanism to clear any residue.
• Evita: Tużax prodotti tat-tindif li joborxu, pads tal-għorik, jew kimiċi ħarxa, għax dawn jistgħu jagħmlu ħsara lill-finitura.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

The Sensea Emmy soap dispenser comes with a Garanzija ta' 2 snin mid-data tax-xiri, li tkopri difetti fil-manifattura.

For technical support, warranty claims, or replacement parts, please contact your retailer or the Sensea customer service department. Please retain your proof of purchase for warranty validation.