TOWODE WiFi Security Alarm System Kit (Model: Home Alarm System) - Instruction Manual
Gwida komprensiva għas-setup, it-tħaddim u l-manutenzjoni.
1. Prodott Aktarview
This Wireless Security System kit provides comprehensive protection for your home, office, or shop. It includes a WiFi loud speaker, door/window sensors, and remote controls, all managed via the Tuya App.
Image 1: Complete TOWODE WiFi Security Alarm System Kit components.
2. Karatteristiċi ewlenin
- Protezzjoni Komprensiva: Includes 6 door/window alarm sensors, 2 remote controls, 1 WiFi loud speaker, and 1 power plug for a complete security solution.
- Intelligent Security Management: Operates on a 2.4 GHz WiFi connection and offers remote control through the Tuya App (Android and iOS) for easy mode changes and device management.
- Twissijiet Instant: Sensors trigger a 120 dB loudspeaker alarm and send immediate notifications to your smartphone when doors or windows are opened.
- Sistema espansibbli: Supports up to 20 remote controls and 30 additional sensors (e.g., motion, water leakage) with 433MHz wireless frequency (eV1527 code).
- WiFi ta' 2.4 GHz Biss: This product is exclusively compatible with 2.4 GHz WiFi networks and does not support 5G networks.
3. Setup u Installazzjoni
3.1 Komponent Aktarview
WiFi Loud Speaker
Immaġni 2: Dettaljata view of the WiFi Loud Speaker components.
Kontroll mill-bogħod
Image 3: Remote control for arming, disarming, SOS, and ringtone functions.
Sensor tal-Bieb/Tieqa
Image 4: Wireless Door Alarm Sensor installation example.
3.2 Installazzjoni tal-Batterija tas-Sensor
The door/window sensors come with batteries included, but an insulation sheet must be removed before first use. To replace the battery, follow these steps:
- Push the back panel of the sensor downward to remove it.
- Remove the insulation sheet or the old battery and install a new 12V battery (type 23A).
- Push the back panel upward to complete the installation.
Video 1: Demonstrates how to remove the insulation sheet and replace the battery in the D025 Door/Window Sensor (0:24-1:12).
3.3 App Configuration (Tuya Smart / Smart Life)
Before configuring the network, ensure your phone is connected to a 2.4 GHz WiFi network, Bluetooth is enabled, and Location Services are authorized for the Tuya Smart App.
Video 2: Guides through network configuration for the WiFi speaker using the Tuya Smart App (1:03-4:24).
3.4 It-tqabbil tas-Sensuri u r-Remoti
3.4.1 Pairing with Standalone Speaker
- Unplug and plug the power cord of the standalone speaker three times to put it into pairing mode.
- Trigger the door sensor (open/close) within 6 seconds to pair.
- Unplug and replug the power cord to exit pairing mode.
Video 3: Demonstrates pairing a door sensor with a standalone speaker (1:13-1:25).
3.4.2 Pairing with WiFi Speaker via SET button
- Press the SET button on the WiFi speaker to put it into pairing mode.
- Trigger the door sensor (open/close) within 20 seconds to pair.
Video 4: Shows how to pair a door sensor with the WiFi speaker using the SET button (1:54-2:00).
3.4.3 Adding Accessories via App
To add additional sensors or remote controls through the Tuya App:
- Open the Tuya App and navigate to the 'Accessories' section.
- Press the '+' icon to enter pairing mode.
- Trigger the detector (e.g., open a door sensor, activate a motion sensor) or press a button on the remote control. The app will confirm successful addition.
Video 5: Demonstrates adding accessories like motion sensors and remote controls via the Tuya App (5:37-6:32).
3.5 Setting Detector Zone Modes
Each detector can be assigned a specific zone mode to determine how the WiFi Alarm Hub responds when triggered. The table below outlines the different modes:
| Detector Zone Mode | Iddiżarma | Away Arm | Driegħ tad-Dar |
|---|---|---|---|
| Normali | X | O | O |
| Dewmien | X | O | O |
| Fid-Dar | X | O | X |
| Home with Delay | X | O | X |
| 24 Sigħat | O | O | O |
| 24 Hours Silent | O | O | O |
| Mitfi | X | X | X |
Note: "X" means the WiFi Alarm Hub will not trigger, "O" means the WiFi Alarm Hub will trigger.
Video 6: Instructions on how to set detector zone modes via the Tuya App (6:33-7:54).
4. Operazzjoni
- Armar: Use the Tuya App or the remote control to set the system to 'Away Arm' (all sensors monitored) or 'Home Arm' (perimeter sensors monitored).
- Id-diżarm: Use the Tuya App or the remote control to disarm the system.
- Notifiki: Receive real-time alerts on your smartphone when an alarm is triggered.
- Armar/Diżarmar Skedat: Configure automatic arming and disarming times through the Tuya App.
5 Issolvi l-problemi
- L-ebda Konnessjoni mal-App: Ensure your WiFi network is 2.4 GHz. This system is not compatible with 5G networks. Verify Bluetooth and Location Services are enabled and authorized for the app.
- Sensuri Mhux qed Jikkoppjaw: Ensure the insulation sheet is removed from the sensor battery. Follow the pairing instructions carefully, ensuring the speaker is in pairing mode and the sensor is triggered within the specified time.
- Allarmi Foloz: Check sensor placement and ensure they are securely mounted. Avoid installing door contacts on metal doors, as this can interfere with operation.
- Kwistjonijiet ta' Kontroll Remot: Verify the remote control battery is functional. Ensure the remote is paired correctly with the system.
6. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | TOWODE |
| Numru tal-Mudell | Home Alarm System |
| Teknoloġija tal-Konnettività | Wireless (2.4 GHz WiFi, 433MHz for sensors) |
| Livell tal-ħoss | 120 Deċibel |
| Metodu ta' Kontroll | App, Remote |
| Sors tal-Enerġija | Battery Powered (6 x 12V batteries included for sensors) |
| Materjal | ABS |
| Dimensjonijiet tal-Prodott | 15.3 x 15.3 x 8.5 ċm |
| Piż tal-oġġett | 690 g |
| Metodu ta 'Installazzjoni | Screw-In/Self-Adhesive/Wall-Mounted |
