Manwal tal-Istruzzjonijiet tal-Waveguide tal-Ħruġ tal-Qarn DS18 PRO-HP52 ta' 2 pulzieri

1. Introduzzjoni

This manual provides essential information for the proper installation, operation, and maintenance of your DS18 PRO-HP52 2-inch Exit Horn Waveguide. Please read this manual thoroughly before installation and retain it for future reference.

2. Prodott Aktarview

The DS18 PRO-HP52 is a durable plastic horn waveguide designed for use with compatible 2-inch bolt-on compression drivers. It features a shorter style for versatile mounting and is constructed from ABS plastic for resistance to corrosion and physical damage. The horn is available in various chrome finishes.

DS18 PRO-HP52 2-inch Exit Horn Waveguide in Red/White Chrome

Figure 1: DS18 PRO-HP52 2-inch Exit Horn Waveguide (Red/White Chrome color shown).

3. Karatteristiċi ewlenin

Disinn kompatt: Features a mounting depth of 2.61 inches and a 2-inch throat diameter, allowing for installation in various spaces.
Kostruzzjoni Durabbli: Made from ABS Plastic for enhanced resistance to corrosion and physical damage.
Bolt-on Compatibility: Designed to fit most 4-bolt pattern compression drivers.
UV Resistant Finish: Chrome finish provides UV resistance and aesthetic appeal.
Optimized Sound Dispersion: Engineered for directional sound projection.

DS18 PRO-HP52 features including ABS Plastic frame and 4-bolt pattern

Figure 2: Illustration of PRO-HP52 features, highlighting ABS plastic construction and 4-bolt pattern compatibility.

4. Speċifikazzjonijiet

Brand	DS18
Mudell	PRO-HP52
Materjal	Plastic ABS
Dijametru tal-gerżuma	2 pulzieri (50.8mm)
Dijametru Ġenerali	6.5 pulzieri (165mm)
Fond tal-Immuntar	2.61 pulzieri (66.3mm)
Sound Coverage Angle	57 degrees (Rounded)
Piż	Madwar 11.3 uqija
Kulur (kif jidher)viewed)	Red/White Chrome (other colors available)

DS18 PRO-HP52 dimensions including overall diameter, throat diameter, and mounting depth

Figure 3: Detailed dimensions of the PRO-HP52 horn waveguide.

5. Installazzjoni

The PRO-HP52 horn waveguide is designed for easy bolt-on installation with compatible 2-inch compression drivers. Ensure you have a suitable compression driver with a 4-bolt mounting pattern.

5.1 Għodod Meħtieġa (Mhux Inklużi)

Appropriate wrench or socket set for mounting bolts.
Screwdriver (if applicable for driver terminals).

5.2 Passi ta' Installazzjoni

Carefully unpack the horn waveguide and inspect for any damage.
Align the mounting holes of the PRO-HP52 horn with the bolt pattern on your compatible 2-inch compression driver.
Insert the provided bolts (or bolts supplied with your compression driver) through the horn's mounting holes and into the compression driver.
Securely fasten the bolts, ensuring a snug fit without overtightening to prevent damage to the plastic.
Once the horn is attached to the driver, proceed with mounting the assembled unit into your desired enclosure or panel.

DS18 PRO-HP52 horn waveguide in various chrome colors attached to compression drivers

Figure 4: PRO-HP52 horn waveguides shown attached to various DS18 compression drivers, demonstrating bolt-on compatibility.

Vidjo 1: Dan il-vidjo jipprovdi aktar minnview of the DS18 PRO-HP52, showcasing its features and compatibility with various compression drivers. It demonstrates the bolt-on installation process.

Video 2: This video, while primarily featuring the PRO-HP102, also illustrates the general concept of attaching DS18 horn waveguides to compression drivers, which is applicable to the PRO-HP52.

Video 3: This video, featuring the PRO-HT1, demonstrates the screw-on installation of a driver into a horn, which can provide a visual reference for general horn and driver assembly, though the PRO-HP52 uses a bolt-on method.

6. Istruzzjonijiet Operattivi

The PRO-HP52 horn waveguide functions as an acoustic amplifier and disperser for a connected compression driver. Its operation is dependent on the specifications and proper connection of the compression driver it is paired with.

Ensure the compression driver is correctly wired to your audio system's amplifier according to the driver's specific instructions.
Verify all connections are secure to prevent signal loss or damage.
Start with low volume levels and gradually increase to your desired listening level to avoid overdriving the compression driver.

7. Manutenzjoni u Kura

Tindif: Uża artab, damp cloth to wipe the surface of the horn waveguide. Avoid abrasive cleaners or solvents that could damage the chrome finish.
Spezzjoni: Periodically check the mounting bolts for tightness. Vibrations can sometimes loosen fasteners over time.
Ħażna: If storing the unit for an extended period, keep it in a cool, dry place away from direct sunlight and extreme temperatures.

8 Issolvi l-problemi

This section addresses common issues that may arise during the use of the PRO-HP52 horn waveguide. Note that most audio performance issues are related to the connected compression driver or the audio system itself.

Ebda Ħsejjes:
- Check the wiring connections between the compression driver and the ampaktar ħaj.
- Verify the compression driver is functioning correctly (refer to its specific manual).
- Tiżgura l- ampIl-lifer huwa mixgħul u jirċievi sinjal.
Ħoss Mgħawġ:
- Reduce the volume level to check if the compression driver is being overdriven.
- Inspect the compression driver for any physical damage or diaphragm issues.
- Ensure the horn is securely attached to the driver.
Loose Horn:
- Tighten the mounting bolts connecting the horn to the compression driver. Do not overtighten.

9. Garanzija u Appoġġ

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your DS18 compression driver or visit the official DS18 websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.

Informazzjoni ta' Kuntatt tad-DS18:

Websit: www.ds18.com
Customer Service: Refer to the website for current contact methods.

	Manwal tas-Sid tad-DS18 PRO-HP52 ABS Short Horn: Speċifikazzjonijiet, Kejl, u Dettalji Manwal dettaljat tas-sid għad-DS18 PRO-HP52 ABS Short Horn, li fih speċifikazzjonijiet tekniċi, kejl preċiż, għażliet ta' kuluri disponibbli, informazzjoni dwar il-garanzija, u twissijiet importanti dwar is-sigurtà. Dan il-ħorn huwa ddisinjat għal sewwieqa tal-kompressjoni tal-gerżuma ta' 2 pulzieri.
	DS18 PRO-HP202 ABS Long Horn Owner's Manual Owner's manual for the DS18 PRO-HP202 ABS Long Horn, a compression driver horn with a 2-inch throat. Includes specifications, measurements, and warranty information.
	DS18 PRO-DKH1X Sewwieq tal-Qarn tal-Aluminju b'2" għall-Gerżuma - Manwal tas-Sid u Speċifikazzjonijiet Manwal dettaljat tas-sid u speċifikazzjonijiet għad-DS18 PRO-DKH1X sewwieq tal-ħoss tal-aluminju b'gerżuma ta' 2 pulzieri b'voice coil tat-titanju. Jinkludi d-dimensjonijiet, l-immaniġġjar tal-qawwa, ir-rispons tal-frekwenza, u aktar.
	DS18 PRO-DKH2 Sewwieq tal-Kompressjoni: 2" Throat, 3" Titanium Voice Coil - Manwal tas-Sid Official owner's manual for the DS18 PRO-DKH2 compression driver. Features detailed specifications, dimensions, frequency response graph, and technical data for this 2-inch throat, 8-ohm aluminum horn speaker component with a 3-inch titanium voice coil.
	Manwal tas-Sid tal-Qarn tal-ABS DS18 PRO-HP102 Manwal tas-sid għad-DS18 PRO-HP102 ABS Horn għal Compression Driver b'gerżuma ta' 2". Jinkludi speċifikazzjonijiet, kejl, u informazzjoni dwar il-garanzija.
	DS18 PRO-HY6MSL 6.5" Hybrid Slim Loudspeaker Owner's Manual and Specifications Comprehensive owner's manual and technical specifications for the DS18 PRO-HY6MSL 6.5-inch hybrid slim loudspeaker. Includes detailed information on general, woofer, and driver specifications, T/S parameters, measurements, and warranty. Designed for powersports and automotive applications.

DS18 PRO-HP52