Introduzzjoni
This manual provides comprehensive instructions for the safe and proper installation and use of your Flexson Wall Mount for SONOS ERA100. Please read all instructions carefully before beginning installation.
The Flexson Wall Mount is designed to securely hold your SONOS ERA100 speaker, allowing for optimal sound positioning with its unique tilting mechanism and 80-degree swivel capability. It is constructed from durable alloy steel with a powder-coated finish.
Kontenut tal-Pakkett
Qabel l-installazzjoni, ivverifika li l-komponenti kollha huma preżenti:
- 1 x Flexson Wall Mount
- Manwal ta' Istruzzjoni
- Twaħħil (viti, tappijiet tal-ħajt)
- Corner Adapter (optional use)
Figura 1: Sploda view of the Flexson Wall Mount for SONOS ERA100, showing all included components and fixings for assembly.
Informazzjoni dwar is-Sigurtà
- Ensure the mounting surface can support the combined weight of the mount and the SONOS ERA100 speaker.
- Uża għodda xierqa u tagħmir tas-sigurtà waqt l-installazzjoni.
- Jekk m'intix ċert dwar l-installazzjoni, ikkonsulta professjonist kwalifikat.
- Żomm partijiet żgħar 'il bogħod mit-tfal.
Setup u Installazzjoni
Follow these steps for proper installation of your Flexson Wall Mount:
- Agħżel Post: Select a suitable wall location, ensuring it is structurally sound and free from electrical wires or plumbing.
- Immarka l-Punti tat-Tħaffir: Hold the wall bracket against the wall at the desired height and use a pencil to mark the drilling points.
- Drill toqob: Drill pilot holes at the marked points. The size of the drill bit will depend on the type of wall and the provided wall plugs.
- Daħħal il-Plakkijiet tal-Ħajt: Daħħal il-plakek tal-ħajt xierqa fit-toqob imtaqqbin.
- Attach Wall Bracket: Secure the wall bracket to the wall using the provided screws. Ensure it is firmly attached.
- Assemble Speaker Cradle: Attach the speaker cradle components as per the diagram, ensuring all screws are tightened.
- Mount Speaker: Carefully place your SONOS ERA100 speaker into the assembled cradle. The mount can be inverted to hold the speaker upside down if desired.
- Attach Speaker to Wall Bracket: Secure the speaker cradle with the speaker to the wall bracket. Ensure the locking mechanism is engaged.
- Aġġusta l-Pożizzjoni: Adjust the speaker's tilt (up to 20 degrees down) and swivel (80 degrees) to achieve the desired sound direction.
Figura 2: Quddiem view of the Flexson Wall Mount securely holding a SONOS ERA100 speaker, demonstrating its discreet design.
Figura 3: Ġenb view of the mounted SONOS ERA100 speaker, highlighting the compact profile of the Flexson Wall Mount.
Figura 4: Angolat view of the SONOS ERA100 speaker on the Flexson Wall Mount, showcasing its integration with the speaker's design.
Istruzzjonijiet Operattivi
Once installed, the Flexson Wall Mount allows for flexible positioning of your SONOS ERA100 speaker.
- Inklinazzjoni: The mount features a unique tilting mechanism. Gently adjust the speaker to tilt it downwards by up to 20 degrees to direct sound.
- Dawwar: The mount allows for an 80-degree swivel (40 degrees left and 40 degrees right) to optimize sound direction. Carefully rotate the speaker to the desired angle.
- Immuntar maqlub: The design allows the speaker to be mounted upside down if required for specific aesthetic or acoustic needs.
Figura 5: Naħa mill-qrib view illustrating the secure attachment and potential for adjustment of the SONOS ERA100 speaker on the Flexson Wall Mount.
Manutenzjoni
The Flexson Wall Mount requires minimal maintenance.
- Tindif: Imsaħ il-muntatura b'ċarruta ratba u niexfa biex tneħħi t-trab. Evita prodotti tat-tindif jew solventi li joborxu.
- Kontroll Perjodiku: Periodically check all screws and fixings to ensure they remain tight and secure.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Mount feels loose on wall | Screws or wall plugs not properly secured. | Tighten all wall mounting screws. Ensure correct wall plugs were used for your wall type. |
| Speaker not stable in cradle | Cradle components not fully assembled or tightened. | Check all screws securing the speaker cradle. Ensure the speaker is correctly seated. |
| Difficulty adjusting tilt/swivel | Adjustment mechanism is too tight. | Do not force. Check the manual for specific adjustment points and loosen slightly if necessary. |
Speċifikazzjonijiet
| Numru tal-Mudell | FLXE100WM1021 |
| Brand | Flexson |
| Kelliem Kompatibbli | SONOS ERA100 |
| Materjal | Azzar Liga |
| Kulur | Iswed |
| Tip Finish | Trab Miksija |
| Dimensjonijiet tal-Prodott | 6.93 x 4.72 x 6.02 pulzieri (17.6 x 12 x 15.3 ċm) |
| Piż tal-oġġett | 14.4-il uqija (0.41 kg) |
| Kapaċità tat-Tagħbija | 14.2 Lira (6.44 kg) |
| Aġġustament tal-Mejjel | Up to 20 degrees downwards |
| Aġġustament li jdur | 80 degrees (40 degrees left, 40 degrees right) |
Garanzija u Appoġġ
For warranty information and technical support, please refer to the official Flexson webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
Manifattur: Flexson
Websit: Visit the Flexson Store on Amazon (għal informazzjoni ġenerali dwar il-marka)
