XPOtool Mobile Workbench Instruction Manual

1. Prodott Aktarview

The XPOtool Mobile Workbench is designed to provide a flexible and functional workspace for various tasks, from DIY projects to professional workshop applications. Its robust construction and thoughtful features ensure durability and convenience.

• Installazzjoni mobbli: Offers flexibility for artisans and DIY enthusiasts to work anywhere.
• Robust Steel Construction: Lacquered steel frame and rubberized feet ensure stability and durability.
• Height-Adjustable Work Surface: Individually adjustable height from 66 cm to 82 cm for ergonomic working.
• Practical Storage Options: Features 2 storage compartments and perforated pegboards on both sides for organized tool storage.
• Applikazzjonijiet versatili: Suitable for workshops, garages, and construction sites for a variety of projects.

Figure 1: Fully assembled XPOtool Mobile Workbench, showcasing its design with top work surface, middle shelf, lower shelf, and side pegboards.

2. Istruzzjonijiet tas-Sigurtà

Please read and understand all safety instructions before assembling and using the workbench. Failure to follow these instructions may result in injury or damage to the product.

• Always ensure all bolts and fasteners are securely tightened before use.
• Do not exceed the maximum load capacity of 50 kg (110 lbs) for the work surface or shelves.
• Distribute weight evenly across the work surface and shelves.
• Żomm idejk u subgħajk 'il bogħod mill-partijiet li jiċċaqalqu waqt l-aġġustament tal-għoli.
• Use the workbench on a level and stable surface.
• Do not stand or climb on the workbench.
• Keep children and pets away from the workbench during assembly and use.

3. Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti u mhux imħassra qabel tibda l-assemblaġġ. Jekk xi partijiet huma neqsin jew imħassra, ikkuntattja l-appoġġ għall-klijenti.

• Steel Frame Components (vertical posts, horizontal crossbars)
• 1x MDF Work Surface (top)
• 1x MDF Middle Shelf
• 1x MDF Lower Shelf
• 2x Side Pegboards
• 2x Roti
• 2x Saqajn tal-Gomma
• Assembly Hardware (bolts, nuts, washers, wrench)

4. Istruzzjonijiet tal-Assemblea

Segwi dawn il-passi bir-reqqa għal assemblaġġ xieraq. Huwa rakkomandat li jkollok persuna oħra tgħinek bl-assemblaġġ.

1. Ħoll il-Komponenti: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Identify each component using the parts list.
2. Arma l-Qafas Prinċipali: Connect the vertical steel posts with the horizontal crossbars using the provided bolts, nuts, and washers. Do not fully tighten bolts until all frame components are in place.
3. Install the Lower Shelf: Place the lower MDF shelf onto the designated supports within the frame. Secure it with bolts, ensuring it is level.
4. Attach the Side Pegboards: Mount the two pegboards to the side sections of the steel frame using the appropriate hardware.
5. Install the Middle Shelf: Position the middle MDF shelf onto its supports and secure it with bolts.
6. Attach the Top Work Surface: Place the main MDF work surface onto the top frame. Secure it firmly with bolts.
7. Install Wheels and Feet: Attach the two wheels to the designated holes on one side of the workbench base. Install the two rubber feet on the opposite side. Ensure they are securely fastened.

   Figure 2: Detail of a wheel and a rubber foot attached to the workbench base.
8. Issikkar finali: Once all components are in place and aligned, fully tighten all bolts and fasteners using the provided wrench.

5. Istruzzjonijiet Operattivi

5.1. Aġġustament tal-Għoli

The workbench height can be adjusted to suit your ergonomic needs. The height can be set between 66 cm and 82 cm.

1. Loosen the bolts on the vertical posts that secure the top work surface and middle shelf.
2. Carefully raise or lower the work surface to the desired height, aligning the holes in the posts with the desired height setting (e.g., 660, 700, 740, 780, 820 mm).
3. Reinsert and securely tighten all bolts to lock the work surface at the new height. Ensure all four corners are at the same height for stability.

   Figure 3: Detail of the height adjustment mechanism on the vertical post, showing various height settings.

5.2. Mobilità u Stabbiltà

The workbench is designed for flexible use with two wheels on one side and two rubber feet on the other.

• To move the workbench, lift the side with the rubber feet slightly and roll it on the wheels.
• For stationary use, ensure the rubber feet are firmly on the ground to prevent movement and provide stability.

5.3. Ħażna

Utilize the two shelves and side pegboards for organized storage of tools and materials.

• The middle and lower shelves provide space for larger tools, boxes, or project components.
• The side pegboards allow for hanging smaller tools and accessories using standard pegboard hooks (not included), keeping them easily accessible.

6. Manutenzjoni

Regular maintenance will prolong the life of your workbench.

• Tindif: Wipe down the work surface and frame with a damp drapp. Evita cleaners li joborxu li jistgħu jagħmlu ħsara lill-finitura.
• Qafliet: Periodically check all bolts and nuts to ensure they remain tight. Retighten as necessary.
• Wiċċ tax-Xogħol: The 15mm MDF work surface is durable. For heavy-duty applications, consider adding a protective layer or reinforcing the surface as needed.

7 Issolvi l-problemi

7.1. Workbench is Unstable

• Kun żgur li l-boltijiet kollha tal-assemblaġġ huma ssikkati sew.
• Verify that the workbench is placed on a level surface.
• Check that the height adjustment bolts are securely fastened at all four corners.

7.2. Difficulty Adjusting Height

• Ensure all bolts securing the work surface and middle shelf are sufficiently loosened before attempting to adjust.
• Do not force the adjustment. If resistance is met, recheck for any obstructions or misaligned holes.

8. Speċifikazzjonijiet

Figura 4: Quddiem view of the workbench with key dimensions in millimeters.

Figura 5: Ġenb view of the workbench with key dimensions in millimeters.

9. Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija jew appoġġ tekniku, jekk jogħġbok irreferi għall-politika tal-bejjiegħ bl-imnut jew ikkuntattja lill-manifattur direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

• Manifattur: XPOtool
• Servizz tal-Klijent: Please refer to the contact information provided by your point of purchase.