CONTEC CMS50Q1 Fingertip Pulse Oximeter User Manual

1. Introduzzjoni

The CONTEC CMS50Q1 Fingertip Pulse Oximeter is a portable, non-invasive device designed for spot-checking of oxygen saturation (SpO2) and pulse rate (PR) through the finger. It is specifically designed for individuals with small fingers, such as children, and is suitable for sports and aviation use. This device is not intended for medical diagnosis or treatment.

Important Note: This device is for Sports or Aviation use only and is not a medical device. Consult a healthcare professional for any medical concerns.

2. Prodott Aktarview

2.1 Karatteristiċi ewlenin

Small Finger Design: Specifically designed to fit finger diameters greater than 0.2 inch (5mm), making it suitable for children.
Accurate & Fast Results: Provides quick and precise measurements of SpO2 and pulse rate.
Wirja ċara: Features a digital rotatable TFT display showing SpO2 value, pulse rate value, bar graph, and pulse waveform.
Operazzjoni faċli: Simple one-button operation for power on and measurement.
Disinn komdu: Fingertip clip made with silica gel material for comfort.
Ħajja twila tal-batterija: Offers 20-30 hours of battery life with automatic power-off after 5 seconds of inactivity.

2.2 X'hemm fil-Kaxxa

CONTEC CMS50Q1 Pulse Oximeter (Main Unit)
Lanyard
Manwal għall-Utent
Cartoon Stickers
Tornavit (għall-kompartiment tal-batterija)

2.3 Komponenti tal-Prodott

Diagram showing the components of the CONTEC CMS50Q1 Pulse Oximeter, including Lanyard Loop Hole, Pulse Rate Bar Graph, SPO2 (Blood Oxygen) display, Low Battery Indicator, Heart Rate display, Battery Cover, and Power Button.

This image illustrates the various parts of the CMS50Q1 Pulse Oximeter, including the display elements and physical features like the lanyard loop hole and battery cover.

3. Setup

3.1 Installazzjoni tal-batterija

Locate the battery compartment on the back of the oximeter.
Use the provided screwdriver to loosen the screw on the battery cover.
Żerżaq l-għatu tal-batterija off.
Daħħal żewġ batteriji AAA (mhux inklużi) fil-kompartiment, waqt li tiżgura l-polarità korretta (+/-).
Replace the battery cover and secure it with the screw using the screwdriver. This screw helps prevent accidental battery access, especially for children.

Step-by-step guide on how to use the CONTEC CMS50Q1 Pulse Oximeter, showing battery installation, finger placement, and reading results.

This image demonstrates the battery installation process and subsequent steps for taking a measurement.

3.2 Twaħħil tal-Lanyard

Thread the thin loop of the lanyard through the lanyard loop hole on the oximeter. Then, pass the larger part of the lanyard through the thin loop and pull gently to secure it. This allows for convenient carrying.

Images showing the CONTEC CMS50Q1 Pulse Oximeter dimensions, included cartoon stickers, and how to attach the lanyard.

This image shows the device dimensions and how to attach the included lanyard.

4. Istruzzjonijiet Operattivi

4.1 Teħid ta 'Kejl

Ensure the oximeter has batteries installed.
Open the clip of the oximeter.
Insert one of your fingers (preferably the index finger) into the rubber opening of the oximeter, ensuring the finger is placed correctly and fully inside. The device is designed for finger diameters greater than 0.2 inch (5mm).
Press the power button once to turn on the oximeter.
Keep your hand still and avoid movement during the measurement.
The SpO2 and pulse rate readings will appear on the display within a few seconds.

4.2 Orjentazzjoni tal-Wiri

The display of the CMS50Q1 Pulse Oximeter can rotate automatically to provide optimal viewing from different angles. Simply adjust the device's orientation, and the display will adapt.

Four images showing the CONTEC CMS50Q1 Pulse Oximeter display rotating to match the device's orientation.

This image demonstrates the rotatable display feature of the oximeter.

4.3 Mitfi Awtomatiku

The device will automatically power off after approximately 5 seconds of inactivity (when no finger is detected) to conserve battery life.

5. Wiri Informazzjoni

The TFT display provides the following information:

SpO2 (%): Livell ta' Saturazzjoni tal-Ossiġnu fid-Demm.
PRbpm: Rata tal-polz f'taħbitiet kull minuta.
Bar Graph: Rappreżentazzjoni viżwali tas-saħħa tal-polz.
Forma tal-Mewġa tal-Polz: A graphical representation of the pulse.
Indikatur tal-Batterija Baxxa: An icon indicating when batteries need replacement.

Close-up of the CONTEC CMS50Q1 Pulse Oximeter display showing SpO2 (98%) and PRbpm (75) readings along with a pulse waveform.

This image shows a typical display reading with SpO2, PRbpm, and the pulse waveform.

6. Manutenzjoni u Kura

6.1 Cleaning the Oximeter

Clean the surface of the oximeter before and after each use with a soft cloth dampimħallat ma' alkoħol mediku (70% etanol jew isopropanol).
Do not immerse the device in water or other cleaning solutions.
Kun żgur li l-apparat ikun niexef għalkollox qabel ma terġa' tużah.

6.2 Sostituzzjoni tal-batterija

When the low battery indicator appears on the display, replace the batteries promptly. Follow the battery installation steps in Section 3.1.

6.3 Ħażna

Store the oximeter in a cool, dry place away from direct sunlight, extreme temperatures, and humidity. If the device will not be used for an extended period, remove the batteries to prevent leakage.

7 Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
L-ebda wirja wara li tixgħel	Il-batteriji huma mejta jew installati ħażin.	Replace batteries or reinstall them with correct polarity.
Display shows '---' or unstable readings	Finger not inserted properly; excessive movement; cold finger; nail polish.	Reinsert finger correctly; remain still; warm the finger; remove nail polish.
L-apparat jintefa awtomatikament	Normal auto-off function (5 seconds inactivity) or low battery.	This is normal behavior. If unexpected, check battery level.
Difficulty opening battery cover	Screw is too tight or cover is stiff.	Use the provided screwdriver. Apply gentle, even pressure to slide the cover after unscrewing.

8. Speċifikazzjonijiet

Dimensjonijiet tal-Prodott: 2.32 x 1.42 x 1.38 pulzieri
Piż tal-oġġett: 3.52 uqija
Measuring Range SpO2: 70-100%
Measuring Range Pulse Rate: 0-250 bpm
Ħajja tal-batterija: Madwar 20-30 sigħat
Sors tal-Enerġija: 2 x batteriji AAA (mhux inklużi)
Tifi awtomatiku: Wara 5 sekonda ta 'inattività
Manifattur: Contec Medical Systems Co.,Ltd

9. Informazzjoni dwar is-Sigurtà

This device is intended for sports and aviation use only. It is not a medical device and should not be used for medical diagnosis or treatment.
Do not use the oximeter during sports activities, as movement can affect accuracy.
Keep the device out of reach of small children to prevent choking hazards from small parts like batteries or the lanyard.
Avoid exposing the device to direct sunlight, high temperatures, or moisture.
Do not attempt to repair or modify the device yourself. Contact support if issues arise.

10. Informazzjoni ta' Appoġġ

For technical support or inquiries regarding your CONTEC CMS50Q1 Pulse Oximeter, please contact the manufacturer using the details below:

Telefon ta' Appoġġ Tekniku: +86-335-8015431
Email: contecmed@contecmed.com.cn
Websit: http://www.contecmed.com

Please refer to the official CONTEC webis-sit jew id-dokumentazzjoni tax-xiri tiegħek għal termini u kundizzjonijiet speċifiċi tal-garanzija.

	Manwal tal-Utent tal-Ossimetru tal-Polz Contec CMS50D1 Manwal komprensiv għall-utent għall-Contec CMS50D1 Pulse Oximeter, li jiddeskrivi l-karatteristiċi, l-ispeċifikazzjonijiet, it-tħaddim sikur, l-installazzjoni, is-soluzzjoni tal-problemi, u l-manutenzjoni tiegħu għal monitoraġġ preċiż ta' SpO2 u r-rata tal-polz.
	Manwal tal-Utent u Speċifikazzjonijiet tal-Ossimetru tal-Polz tas-Saba' Contec CMS50D1 Gwida komprensiva għall-utent għall-pulse oximeter tal-ponta tas-swaba' Contec CMS50D1, li tiddeskrivi l-karatteristiċi, it-tħaddim, il-manutenzjoni, is-soluzzjoni tal-problemi, u l-ispeċifikazzjonijiet tekniċi tiegħu għall-monitoraġġ ta' SpO2 u r-rata tal-polz.
	Manwal tal-Utent tal-Ossimetru tal-Polz Contec CMS60D: Monitoraġġ tal-SpO2 u r-Rata tal-Polz Dan il-manwal tal-utent jipprovdi struzzjonijiet komprensivi għall-Contec CMS60D Pulse Oximeter, li jkopri l-karatteristiċi, it-tħaddim, l-installazzjoni, il-manutenzjoni, is-soluzzjoni tal-problemi, u l-ispeċifikazzjonijiet tekniċi tiegħu għal kejl preċiż ta' SpO2 u r-rata tal-polz.
	CONTEC ESB0059 Manwal għall-Utent tas-Sonda tal-Pulse Oximeter Manwal tal-utent għas-Sonda tal-Ossimetru tal-Pulse CONTEC ESB0059, li jiddeskrivi l-użu maħsub tagħha, l-ispeċifikazzjonijiet tal-prestazzjoni, id-direzzjonijiet għall-użu, il-manutenzjoni, it-twissijiet, u l-informazzjoni dwar il-kompatibilità elettromanjetika għall-professjonisti tal-kura tas-saħħa.
	Manwal tal-Utent tal-Ossimetru tal-Polz Contec CMS60D1 Manwal tal-utent għall-Contec CMS60D1 Pulse Oximeter, li jiddeskrivi l-karatteristiċi, l-operat, l-ispeċifikazzjonijiet, u l-prekawzjonijiet ta' sigurtà tiegħu għall-kejl tas-saturazzjoni tal-ossiġnu tal-polz u r-rata tal-polz.
	Manwal tal-Utent tal-Ossimetru tal-Polz Contec CMS50S+ Manwal tal-utent għall-Contec CMS50S+ Pulse Oximeter, li jiddeskrivi l-karatteristiċi, l-operat, il-manutenzjoni u l-ispeċifikazzjonijiet tiegħu għall-kejl tal-SpO2 u r-rata tal-polz.

CONTEC CMS50Q1