Manwal għall-Utent tal-Kamera AXIS Q6225-LE PTZ

1. Introduzzjoni

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Axis Communications AXIS Q6225-LE PTZ Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety. This camera is designed for robust outdoor surveillance in challenging conditions.

2. Informazzjoni dwar is-Sigurtà

Observe the following safety precautions to prevent damage to the product or injury to personnel:

• Installazzjoni: Installation must be performed by qualified personnel in accordance with all local and national electrical and building codes.
• Provvista tal-Enerġija: Use only the specified power supply (60 watts) for this device. Ensure the power source is stable and meets the camera's requirements.
• Ambjent: The camera is designed for outdoor use. However, avoid exposing it to extreme conditions beyond its specified operating range.
• Tindif: Skonnettja l-provvista tal-enerġija qabel it-tindif. Uża drapp artab u niexef. Tużax prodotti tat-tindif likwidi jew aerosol.
• Modifiki: Do not attempt to modify or disassemble the camera. This may void the warranty and pose safety risks.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• Kamera PTZ AXIS Q6225-LE
• Gwida għall-Installazzjoni
• Bracket u Hardware tal-Immuntar
• Network Cable Connector
• Documentation and Software CD (if applicable)

Figura 1: AXIS Q6225-LE PTZ Camera. This image displays the grey-colored PTZ camera unit, highlighting its robust housing and integrated lens system, designed for outdoor surveillance.

4. Setup u Installazzjoni

4.1 Immuntar tal-Kamera

The AXIS Q6225-LE is designed for wall mount installation. Ensure the mounting surface is strong enough to support the camera's weight and withstand environmental conditions.

1. Agħżel post adattat għall-immuntar li jipprovdi l-kamp mixtieq ta' view u jkun qrib ħafna ta' konnessjonijiet tal-enerġija u tan-netwerk.
2. Use the provided mounting template to mark drill holes on the wall.
3. Drill pilot holes and secure the mounting bracket using appropriate screws and anchors.
4. Waħħal il-kamera mal-bracket tal-immuntar, waqt li tiżgura li tkun imwaħħla sew f'postha.

4.2 Konnessjoni tal-Enerġija u tan-Netwerk

Connect the camera to power and network as follows:

• Qawwa: Connect the power cable to a 60-watt power source. Ensure the connection is secure and weatherproof.
• Netwerk: Connect an Ethernet cable from your network switch or router to the camera's network port. The camera supports Wi-Fi for wireless communication. Refer to the network configuration section for wireless setup.

4.3 Konfigurazzjoni Inizjali

Wara l-installazzjoni fiżika u l-konnessjoni, aċċessa l-kamera web interface for initial configuration:

1. Iftaħ a web browser on a computer connected to the same network as the camera.
2. Enter the camera's IP address in the browser's address bar. If the IP address is unknown, use the AXIS IP Utility tool to discover it.
3. Follow the on-screen prompts to set up a new password for the administrator account.
4. Configure basic network settings, date/time, and video stream settings.

5. It-tħaddim tal-Kamera

5.1 Kontroll tal-Pan, Tilt, u Zoom (PTZ)

The AXIS Q6225-LE camera features full PTZ capabilities, allowing remote adjustment of its viewing angle and zoom level. Control is typically performed via the camera's web interface or compatible video management software (VMS).

• Ħobż: Rotate the camera horizontally to cover a wider area.
• Mejjel: Adjust the camera vertically to view objects at different heights.
• Zoom ottiku: Use the optical zoom feature to magnify distant objects without loss of image quality.

5.2 Sejbien tal-Mozzjoni u Twissijiet

The camera supports motion-only alerts. Configure motion detection zones and sensitivity settings in the web interface to trigger recordings or notifications when movement is detected.

5.3 Infrared (IR) Illumination

Equipped with infrared light sources, the camera provides clear video surveillance in low-light or complete darkness. IR illumination activates automatically or can be manually controlled.

6. Manutenzjoni

6.1 Tindif

Regular cleaning of the camera lens and housing is recommended to ensure optimal performance, especially in dusty or harsh environments.

• Gently wipe the lens with a soft, lint-free cloth. For stubborn dirt, use a lens cleaning solution specifically designed for optical surfaces.
• Naddaf il-housing tal-kamera b'reklamaramp drapp. Evita prodotti tat-tindif jew solventi li joborxu.

6.2 Aġġornamenti tal-Firmware

Periodically check the Axis Communications website for firmware updates. Keeping the camera's firmware up-to-date ensures access to the latest features, security enhancements, and bug fixes.

7 Issolvi l-problemi

This section addresses common issues you might encounter with your AXIS Q6225-LE camera.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information and technical support, please refer to the official Axis Communications webis-sit jew ikkuntattja lin-negozjant awtorizzat tiegħek. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

Riżorsi onlajn: www.axis.com