Manwal tal-Utent tal-Kit tat-Tindif Multifunzjonali tal-HTC AT1208

1. Introduzzjoni

Thank you for choosing the HTC AT1208 Multi-functional Grooming Kit. This comprehensive 12-piece set is designed for precise grooming of hair, beard, body, nose, and ears. Please read this manual carefully before first use to ensure safe and optimal performance of your device. Keep this manual for future reference.

2. Prodott Aktarview u Komponenti

The HTC AT1208 grooming kit includes a main trimmer unit and various interchangeable heads and accessories to meet diverse grooming needs.

Stampa 2.1: The HTC AT1208 grooming kit, showcasing the main trimmer unit, various cutting heads, guide combs, charging cable, cleaning brush, lubricating oil, and a styling comb.

Komponenti Inklużi:

• Main Trimmer Unit with LED Display
• Hair Clipper Head (T-blade trimmer)
• Ras tat-Trimmer tal-Beard
• Preċiżjoni Trimmer Kap
• Ras tat-Trimmer tal-Imnieħer u l-Widnejn
• Kap Trimmer tal-Korp
• Mikro Shaver Kap
• Adjustable Guide Combs (for hair and body trimming)
• Kejbil tal-Iċċarġjar (USB)
• Pinzell tat-tindif
• Żejt Lubrikanti
• Stand organizzatur

3. Istruzzjonijiet tas-Sigurtà

• Aqra l-istruzzjonijiet kollha qabel tuża dan l-apparat.
• Dan l-apparat huwa maħsub għall-użu fid-dar biss.
• Do not immerse the main unit in water. The blades are washable, but ensure the main unit is not submerged.
• Żomm l-apparat 'il bogħod mit-tfal.
• Always check the blades for damage before use. Do not use if blades are damaged, as this may cause injury.
• Do not use the appliance on irritated or damaged skin.
• Aqla 'l-apparat qabel it-tindif jew il-manutenzjoni.
• Uża biss il-kejbil tal-iċċarġjar ipprovdut.
• Do not expose the appliance to extreme temperatures or direct sunlight.

4. Setup

4.1 Iċċarġjar tat-Trimmer

Before first use, fully charge the trimmer for approximately 1.5 to 2 hours. The LED display will show the battery level. A full charge provides up to 120 minutes of cordless operation.

• Qabbad il-kejbil tal-iċċarġjar USB mal-port tal-iċċarġjar tat-trimmer.
• Plug the other end of the USB cable into a compatible USB power source (e.g., laptop, USB adapter, power bank, car charger).
• Id-displej LED se jindika l-istatus tal-iċċarġjar.

Stampa 4.1: The trimmer connected to a laptop via USB for charging. The image also shows various compatible USB power sources like a USB outlet, USB charger, car charger, and power bank.

4.2 Twaħħil u Tneħħija tar-Rasijiet tat-Trimmer

Ensure the trimmer is turned off before attaching or detaching any heads.

Stampa 4.2: Visual guide for removing and installing trimmer heads. To remove, ensure the motor is off, press the thumb in the direction of the arrow, and the head detaches easily. To install, ensure the motor is off, align the cutting head with the slot, and press firmly until it clicks into place.

• Biex tinqala': Hold the main unit firmly. Place your thumb on the cutting head and push it upwards in the direction of the arrow until it detaches.
• Biex Twaħħal: Align the desired cutting head with the slot on the main unit. Press the head firmly until you hear a click, indicating it is securely in place.

5. Istruzzjonijiet Operattivi

5.1 Powering On/Off and Speed Modes

• Press the power button once to turn on the trimmer. The LED display will show the current battery level and speed setting.
• The trimmer features two speed modes: 6000 RPM for daily use and 6500 RPM for thicker hair. Press the power button again to switch between speeds.
• Press and hold the power button to turn off the trimmer.

5.2 Using the Guide Combs

The kit includes adjustable guide combs for precise length control.

Stampa 5.1: The image displays two types of adjustable guide combs. On the left, a quick-adjust dial comb for 1-10mm hair cutting. On the right, an adjustable body trimmer comb for 3-6-9mm lengths.

• Attach the appropriate guide comb to the desired trimmer head (e.g., hair clipper head or body trimmer head).
• Adjust the length setting using the dial or by selecting the correct comb for the desired hair length.
• Dejjem ibda b'setting itwal jekk m'intix ċert, u naqqas it-tul gradwalment.

5.3 Specific Grooming Applications

Select the appropriate head for your grooming task. Ensure your skin is clean and dry before use.

Stampa 5.2: This image illustrates the various applications of the grooming kit. It shows the T-blade trimmer for hair cutting, the beard trimmer for facial hair, the nose trimmer for nasal hair, the body trimmer for body hair, the micro shaver for close shaving, and the precision trimmer for detailing.

• Hair Clipper Head (T-blade Trimmer): Ideal for haircuts and precise edging. Use with guide combs for desired length.
• Ras tat-Trimmer tal-Daqna: For shaping and trimming beards and mustaches. Can be used with or without a guide comb.
• Ras tat-Trimmer tal-Imnieħer u l-Widnejn: Daħħal it-trimmer bil-mod fil-parti ta' wara tal-imnifsejn jew tal-kanal tal-widna. Tdaħħalx fil-fond wisq.
• Body Trimmer Head: For grooming body hair. Use with the body guide comb for even trimming.
• Ras tat-Trimmer ta' Preċiżjoni: For fine lines, detailing, and intricate designs.
• Micro Shaver Head: For a close, smooth finish on small areas after trimming.

6. Manutenzjoni u Tindif

Regular cleaning and maintenance will prolong the life of your grooming kit and ensure optimal performance.

6.1 Tindif tar-Rasijiet tat-Trimmer

The trimmer heads are 100% washable for easy cleaning.

Stampa 6.1: The main trimmer unit being rinsed under running water, demonstrating its washable design. This image highlights the ease of cleaning the device.

• Ensure the trimmer is turned off and unplugged before cleaning.
• Detach the cutting head from the main unit.
• Rinse the cutting head under running water to remove hair clippings.
• Uża l-pinzell tat-tindif provdut biex tneħħi kwalunkwe xagħar iebes mix-xfafar.
• Allow the cutting head to air dry completely before reattaching or storing.
• Do not rinse the main trimmer unit under running water. Wipe it with a damp drapp.

6.2 Lubrikazzjoni tax-Xfafar

To maintain blade sharpness and smooth operation, lubricate the blades regularly.

• After cleaning and drying the blades, apply 1-2 drops of the provided lubricating oil onto the blades.
• Ixgħel it-trimmer għal ftit sekondi biex iż-żejt jitqassam b'mod uniformi.
• Imsaħ kwalunkwe żejt żejjed b'ċarruta ratba.

7 Issolvi l-problemi

If you encounter any issues with your HTC AT1208 grooming kit, please refer to the following common solutions:

• Trimmer ma jixgħelx: Kun żgur li l-batterija hija ċċarġjata. Qabbad it-trimmer mal-ċarġer u ħallih jiċċarġja għal mill-inqas 30-il minuta qabel ma tipprova tixgħelu mill-ġdid.
• Prestazzjoni ħażina tat-tqattigħ:
  • Check if the blades are clean and free of hair clippings. Clean them thoroughly.
  • Applika żejt lubrikanti fuq ix-xfafar.
  • Ensure the correct trimmer head and guide comb are securely attached.
  • The battery might be low. Charge the trimmer.
• Ħsejjes jew vibrazzjonijiet eċċessivi: Turn off the trimmer and check if the cutting head is properly attached. Clean and lubricate the blades.
• Trimmer gets hot: This can occur during prolonged use. Allow the trimmer to cool down before continuing. Ensure the blades are clean and lubricated.

Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your packaging for specific terms and conditions. For technical support, replacement parts, or any other inquiries, please contact the retailer or HTC customer service.