1. Introduzzjoni
The Fanvil DS102 Desktop Stand is an essential accessory designed to facilitate the desktop installation of the Fanvil i56A Indoor Doorphone and Intercom Station. This bracket accessory package provides a stable and space-saving solution, allowing the i56A unit to be conveniently placed on a desk or flat surface rather than being wall-mounted. Its robust metal construction ensures durability and reliable support for your intercom station.
2. Informazzjoni dwar is-Sigurtà
- Ensure the stand is placed on a stable, flat, and level surface to prevent the connected device from tipping over.
- Do not expose the stand to excessive moisture, direct sunlight, or extreme temperatures.
- Keep the stand away from heat sources and open flames.
- Avoid dropping or subjecting the stand to strong impacts, as this may cause damage.
- Do not attempt to modify or disassemble the stand. Any unauthorized modifications may void the warranty and pose safety risks.
- Żomm fejn ma jintlaħaqx mit-tfal u l-annimali domestiċi.
3. X'hemm fil-Kaxxa
Malli tiftaħ il-pakkett, ivverifika li l-komponenti kollha huma preżenti u mhux imħassra:
- 1 x Fanvil DS102 Table Desk Stand
Note: The Fanvil i56A Indoor Doorphone and Intercom Station is sold separately and is not included with this stand.
4. Istruzzjonijiet ta' Setup
The Fanvil DS102 Desktop Stand is designed for easy assembly and integration with your Fanvil i56A Indoor Station. Follow these steps for proper setup:
- Iftaħ l-Stand mill-pakkett: Carefully remove the DS102 Desktop Stand from its packaging. Inspect it for any signs of damage during transit.
- Prepare the i56A Unit: Ensure your Fanvil i56A Indoor Station is ready for desktop installation. Refer to the i56A's manual for any specific preparation steps.
- Attach the i56A to the Stand: Align the mounting points on the back of the Fanvil i56A Indoor Station with the corresponding slots or attachment points on the DS102 Desktop Stand. Gently slide or click the i56A into place until it is securely fastened. The design ensures a snug fit.
- Poġġi l-Istand: Place the assembled i56A and DS102 stand on your desired flat, stable desktop surface. Ensure there is adequate space around the unit for ventilation and cable management.
- Qabbad Kejbils: Once the i56A is securely on the stand, connect all necessary cables (e.g., power, network) to the i56A unit. Route cables neatly to maintain a tidy workspace.
Figure 4.1: Fanvil DS102 Desktop Stand. This image shows the front view of the grey metal stand, featuring two elongated oval cutouts for design and ventilation, and black anti-slip feet at the base.
5. It-tħaddim tal-Istand
The Fanvil DS102 is a passive accessory designed to provide a stable base for your Fanvil i56A Indoor Station. There are no active "operating" steps for the stand itself. Once the i56A is securely mounted on the DS102, the stand functions by holding the device in an upright, accessible position on a flat surface. Ensure the stand is always placed on a stable, level surface to prevent accidental tipping or damage to the connected device.
6. Manutenzjoni
Regular maintenance of your Fanvil DS102 Desktop Stand will help preserve its appearance and functionality:
- Tindif: Uża drapp artab, niexef u mingħajr suf biex timsaħ l-istand. Għal marki persistenti, neħħi ftit drapp.amp cloth with mild soap can be used, followed immediately by a dry cloth. Avoid abrasive cleaners, solvents, or strong chemicals, as these can damage the metal finish.
- Spezzjoni: Periodically check the stand for any signs of wear, damage, or loose connections. Ensure the rubber feet are intact to maintain stability and prevent scratching surfaces.
- Ħażna: Jekk taħżen l-istand għal perjodu estiż, kun żgur li jkun nadif u niexef. Aħżnu f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
7 Issolvi l-problemi
This section addresses common issues you might encounter with the Fanvil DS102 Desktop Stand:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-istand jitriegħed jew mhux stabbli. | Uneven surface; i56A not properly seated; damaged stand. | Ensure the stand is on a flat, level surface. Re-seat the i56A unit firmly onto the stand. Inspect the stand for any physical damage. |
| i56A does not fit the stand. | Incorrect model of i56A; stand is damaged. | Verify that your indoor station is indeed a Fanvil i56A model. The DS102 is specifically designed for the i56A. If it is the correct model, check the stand for any deformities. |
| Grif fuq il-wiċċ tal-iskrivanija. | Missing or damaged rubber feet. | Check if the black rubber feet on the bottom of the stand are present and intact. If missing or damaged, contact Fanvil support for replacement parts or use protective padding. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Mudelli Applikabbli | Stazzjon Intern Fanvil i56A |
| Dimensjonijiet tal-Prodott (L x W x H) | 170 x 110.94 x 13.5 mm (6.69 x 4.37 x 0.53 pulzieri) |
| Materjal | Metall |
| Temperatura tax-Xogħol | 0 ~ 45 ° C (32 ~ 113 ° F) |
| Piż tal-oġġett | 178g (0.39 lbs / 6.28 oz) |
| Numru tal-Mudell | DS102 |
| UPC | 889837002209 |
9. Garanzija u Appoġġ
Fanvil products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your Fanvil i56A Indoor Station or visit the official Fanvil website. The DS102 Desktop Stand is covered under the general accessory warranty policy.
For technical support, product inquiries, or assistance with troubleshooting, please contact Fanvil customer service or your authorized Fanvil dealer. You can typically find contact information on the official Fanvil websit: www.fanvil.com
