1. Introduzzjoni
Thank you for choosing the MAF 18 Inch Full Size Bed Frame. This heavy-duty metal platform bed frame is designed for durability and stability, providing excellent support for your mattress without the need for a box spring. Its thoughtful design includes rounded corners for safety and ample under-bed storage space. Please read this manual carefully before assembly and use to ensure proper setup and long-lasting performance.
2. Informazzjoni Importanti dwar is-Sigurtà
Jekk jogħġbok osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korriment jew ħsara lill-prodott:
- Żomm il-partijiet u l-materjali tal-ippakkjar kollha fejn ma jintlaħqux mit-tfal.
- Assemble the bed frame on a soft, non-abrasive surface (e.g., carpet or cardboard) to prevent scratches.
- Kun żgur li l-boltijiet u l-viti kollha huma ssikkati sew qabel l-użu. Iċċekkja u erġa' ssikka l-konnessjonijiet perjodikament.
- Do not exceed the maximum weight capacity of 3000 LBS.
- Avoid standing or jumping on the bed frame.
- The rounded corners are designed to prevent injuries from toe bumps; however, exercise caution around the frame.
- Use the provided anti-slip baffles to prevent the mattress from sliding.
3. Lista tal-Partijiet
Before beginning assembly, verify that all components are present and undamaged. Refer to the diagram below for identification.
Figura 3.1: Sploda view of bed frame components.
| Parti | Deskrizzjoni | Kwantità |
|---|---|---|
| A | Legs (Corner) | 4 |
| B | Binarji tal-Ġnub | 2 |
| C | Head/Foot End Rails | 2 |
| D | Center Support Beams | 2 |
| E | Saqajn ta' Appoġġ taċ-Ċentru | 2 |
| F | Paletti | 12 |
| G | Tapp tas-saqqu | 2 |
| H | Pads tas-saqajn tal-gomma | 4 |
| I | Wrench | 1 |
| J | Ċavetta Hex | 1 |
| K | Boltijiet (daqsijiet varji) | Assortiti |
4. Istruzzjonijiet tal-Assemblea
Follow these steps carefully for proper assembly. It is recommended to have two people for easier assembly, though it can be done by one person.
4.1 Tneħħija tal-kaxxa u Tħejjija
Carefully open the packaging and lay out all components on a clean, soft surface to prevent damage. Identify each part using the Parts List (Section 3).
Video 4.1: Unboxing and initial setup of the bed frame components.
4.2 Assemblaġġ tal-qafas
- Connect the side rails (B) to the corner legs (A) using the provided bolts. Ensure the U-shaped grooves on the rails are facing upwards.
- Attach the head and foot end rails (C) to the remaining corner legs (A).
- Connect the assembled side and end sections to form the main rectangular frame.
- Insert the center support beams (D) into the designated slots on the side rails.
- Attach the center support legs (E) to the center support beams (D). Ensure these legs are securely fastened.
- Place the slats (F) into the U-shaped grooves on the side rails and center support beams. Ensure they are evenly spaced and firmly seated.
- Install the mattress stoppers (G) on the head and foot ends of the frame by sliding them into the designated slots. Ensure they are mounted outwards to prevent mattress sliding.
- Attach the rubber foot pads (H) to the bottom of all legs to protect your floor and prevent slipping.
- Once all components are in place, use the provided hex key and wrench to fully tighten all bolts. Do not overtighten.
Figure 4.2: Fully assembled MAF bed frame.
Video 4.3: Detailed assembly steps for the bed frame.
5. Użu u Kura
5.1 Tqegħid tas-Saqqijiet
Place your mattress directly onto the steel slats. No box spring is needed for this platform bed frame. The anti-slip baffles and rubber foot cushions are designed to keep your mattress securely in place and prevent the frame from sliding.
Figure 5.1: Mattress on the bed frame, showing no box spring needed.
5.2 Ħażna taħt is-Sodda
This bed frame provides 16.4 inches of clearance for under-bed storage, allowing you to maximize space in your room. Utilize storage bins or containers to keep your belongings organized and the area tidy.
Figure 5.2: Illustration of the generous under-bed storage space.
5.3 Kura Ġenerali
- Imsaħ il-qafas tal-metall b'ċarruta ratba u damp drapp. Evita kimiċi ħarxa jew prodotti tat-tindif li joborxu.
- Iċċekkja l-boltijiet u l-konnessjonijiet kollha perjodikament biex tiżgura li jibqgħu ssikkati. Issikkahom mill-ġdid jekk meħtieġ biex iżżomm l-istabbiltà u tevita l-ħoss ta' ħsejjes.
6 Issolvi l-problemi
6.1 Ħsejjes ta' Tgergir
If your bed frame begins to squeak, it is most likely due to loose connections. Re-tighten all bolts on the frame, paying close attention to the main frame connections and the center support legs. Ensure the rubber foot pads are properly installed.
6.2 Mattress Sliding
The bed frame is equipped with plastic anti-skid baffles to prevent mattress movement. Ensure these baffles are correctly installed and facing outwards. If sliding persists, verify that your mattress is compatible with a platform bed and consider adding a non-slip mattress pad.
Figure 6.1: Proper installation of mattress stoppers.
7. Speċifikazzjonijiet tal-Prodott
| Karatteristika | Dettall |
|---|---|
| Brand | MAF |
| Numru tal-Mudell | 18-JD-MT10 |
| Daqs | Sħiħ |
| Dimensjonijiet tal-Prodott | 74.5"T x 53.4"W x 18"Għ |
| Daqs tas-Saqqu Kompatibbli | 75" x 54" |
| Kapaċità tal-piż | 3000 LBS (Static Pressure) |
| Għoli tal-Ħażna taħt is-Sodda | 16.4 pulzieri |
| Materjal | Azzar Durabbli |
| Tip Finish | Miksija bit-Trab (Iswed) |
| Karatteristiċi Speċjali | Rounded Corners, Mattress Slide Stopper, Anti-slip Rubber Gaskets, Steel Slat Support, No Box Spring Needed, Easy Assembly |
| Piż tal-oġġett | 31 liri |
| Assemblea Meħtieġa | Iva |
Figure 7.1: Detailed dimensions of the Full size bed frame.
8. Garanzija u Appoġġ
For any questions, concerns, or assistance with your MAF bed frame, please contact MAF-SLEEP customer support. Refer to your purchase documentation for specific warranty details.
MAF-SLEEP is committed to producing high-quality products and providing excellent service.
Additional protection plans may be available through your retailer. Please check with your point of purchase for more information.
