1. Introduzzjoni
Grazzi tax-xiriasing the Shanrya Digital Mirror Alarm Clock. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read these instructions carefully before use and retain them for future reference.
Figura 1: Quddiem view of the Shanrya Digital Mirror Alarm Clock displaying 4:30 in red LED digits.
2. Setup
2.1 Kontenut tal-Pakkett
- Shanrya Digital Mirror Alarm Clock
- Kejbil tal-Enerġija USB
- Manwal għall-Utent (dan id-dokument)
Figure 2: The alarm clock shown with its USB power cable, ready for connection.
2.2 Konnessjoni tal-Enerġija
- Connect the small end of the provided USB power cable to the DC 5V input port on the back of the alarm clock.
- Connect the standard USB end of the cable to a USB power adapter (not included) or a powered USB port.
- Id-displej se jixgħel, u jindika li l-arloġġ huwa mixgħul.
Nota: This clock requires continuous power via USB. It does not operate on batteries for primary function, but may have a small internal battery for time memory during power outages (not user-replaceable).
3. Istruzzjonijiet Operattivi
3.1 Funzjonijiet tal-buttuni
The clock features several buttons, typically located on the top or side. Refer to Figure 3 for button identification.
Figura 3: Dettaljat view of the clock's control buttons and examples of different display brightness levels.
- Buttuna MODE: Used to switch between time display, alarm setting, and other modes.
- Buttuni UP/DOWN: Used to adjust values (time, alarm) or brightness levels.
- Buttuna SNOOZE: Jattiva l-funzjoni snooze meta jdoqq l-allarm.
3.2 Issettjar tal-Ħin
- Agħfas il- MODALITÀ Agħfas il-buttuna sakemm il-wiri tal-ħin jteptep.
- Uża l- UP u 'L isfel buttuni biex taġġusta s-siegħa.
- Agħfas MODALITÀ again to switch to minute adjustment.
- Uża l- UP u 'L isfel buttuni biex jaġġustaw il-minuti.
- Agħfas MODALITÀ biex tikkonferma u toħroġ mill-modalità tal-issettjar tal-ħin.
3.3 Issettjar tal-Allarm
- Agħfas il- MODALITÀ button repeatedly until the alarm icon (e.g., a bell) appears and the alarm time flashes.
- Uża l- UP u 'L isfel buttuni biex tissettja s-siegħa tal-allarm mixtieqa.
- Agħfas MODALITÀ again to switch to minute adjustment.
- Uża l- UP u 'L isfel buttuni biex tissettja l-minuti tal-allarm mixtieqa.
- Agħfas MODALITÀ to confirm and activate the alarm. The alarm icon will remain displayed.
- To deactivate the alarm, repeat the steps and press MODALITÀ sakemm l-ikona tal-allarm tisparixxi.
3.4 Funzjoni Snooze
Meta l-allarm jinstema ', agħfas il-buttuna SNOOZE button (usually located on top of the clock) to temporarily silence the alarm. The alarm will sound again after a preset interval (e.g., 5-10 minutes). To turn off the alarm completely, press any other button or let it ring for its full duration.
3.5 Aġġustament tal-luminożità
The clock offers multiple brightness levels for its LED display, including manual adjustment, automatic adjustment, and a night mode. This allows for optimal visibility in various lighting conditions.
- Aġġustament manwali: Fil-modalità tal-wiri tal-ħin, agħfas il-buttuna UP or 'L isfel buttons to cycle through different brightness levels (e.g., Dark, Mid Gear, Bright).
- Aġġustament Awtomatiku: Some models may feature an ambient light sensor that automatically adjusts display brightness based on room lighting. Refer to Figure 3 for visual representation of brightness levels.
- Modalità bil-lejl: A specific setting that dims the display significantly during predefined night hours to prevent disturbance. Consult the specific button sequence for your model to activate/deactivate night mode.
4. Manutenzjoni
4.1 Tindif
Biex tnaddaf l-arloġġ, imsaħ il-wiċċ bil-mod b'ċarruta ratba, niexfa, jew kemxejn imsaħ.amp cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the mirror finish and electronic components.
4.2 Ħażna
If storing the clock for an extended period, disconnect it from the power source and store it in a cool, dry place away from direct sunlight and extreme temperatures.
5 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Display is blank or not lighting up. | Ebda enerġija jew konnessjoni maħlula. | Ensure the USB cable is securely connected to both the clock and a powered USB port/adapter. Try a different USB port or adapter. |
| L-allarm ma jdoqqx. | Alarm not set or deactivated. Volume too low (if applicable). | Verify the alarm is set and the alarm icon is displayed. Check if there's a volume setting (though most digital clocks have fixed alarm volume). |
| Il-ħin mhux korrett. | Il-ħin mhux issettjat sew jew interruzzjoni tad-dawl. | Reset the time according to section 3.2. If power was interrupted, the clock may need to be reset. |
| Id-displej huwa qawwi wisq jew mudlam wisq. | L-issettjar tal-luminożità jeħtieġ aġġustament. | Adjust the brightness manually using the UP/DOWN buttons as described in section 3.5. |
6. Speċifikazzjonijiet
- Numru tal-Mudell: Shanrya1am475rqfe-12
- ASIN: B0BVC2VWF3
- Ditta: Shanrya
- Tip ta' wiri: LED Diġitali (Aħmar)
- Karatteristiċi: Alarm, Snooze, Dimmable Display (Manual, Auto, Night Mode)
- Sors tal-Enerġija: DC 5V via USB cable
- Dimensjonijiet: Approximately 15.8 cm (6.2 in) x 8.7 cm (3.4 in) (Width x Height)
- L-Ewwel Data Disponibbli: 25 ta’ Marzu, 2023
Figure 4: Diagram illustrating the approximate dimensions of the alarm clock.
7. Garanzija u Appoġġ
Dan il-prodott huwa kopert minn garanzija standard tal-manifattur. Għat-termini u l-kundizzjonijiet speċifiċi tal-garanzija, jekk jogħġbok irreferi għad-dokumentazzjoni pprovduta fil-ħin tax-xiri jew ikkuntattja lill-bejjiegħ tiegħek.
For technical support or inquiries, please contact the seller or manufacturer through the platform where the product was purchased. Please have your model number (Shanrya1am475rqfe-12) and ASIN (B0BVC2VWF3) ready when contacting support.
