Manwal tal-Utent tat-Tojlit Intelliġenti mingħajr Tank EPLO DP7 bil-Bidet

1. Informazzjoni Importanti dwar is-Sigurtà

Jekk jogħġbok aqra l-istruzzjonijiet kollha bir-reqqa qabel l-installazzjoni u l-użu. Żomm dan il-manwal għal referenza futura.

• Ensure the electrical outlet is a Ground Fault Circuit Interrupter (GFCI) 110V outlet and is within 3 feet of the toilet.
• Verify water pressure is at least 35 PSI for optimal flushing performance.
• Do not expose the product to excessive moisture or water spray beyond normal bathroom use.
• Skonnettja l-enerġija qabel ma tagħmel xi manutenzjoni jew tindif.

2. Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• EPLO DP7 Smart Toilet Unit
• Kontroll mill-bogħod
• Mounting Accessory Kit (1 pc)
• Mounting Template cardboard
• Valv tat-T (1 pc)
• Manwal għall-Utent (dan id-dokument)
• Ċirku tax-Xama' (biċċa 1)
• Sealing Flange (1 pc)

3. Prodott Aktarview

The EPLO DP7 is a tankless smart toilet designed for enhanced hygiene and comfort. Key features include automatic lid opening/closing, a heated seat, bidet functions, and various flushing options.

4. Gwida għall-Installazzjoni

This section provides instructions for installing your EPLO DP7 Smart Toilet. Professional installation is recommended.

4.1 Kontrolli ta' qabel l-installazzjoni

• Kejl mhux maħdum: Ensure your bathroom has a standard 12-inch (305mm) rough-in.
• Provvista tal-Ilma: The toilet requires a 1/2-inch accessory connection type. Confirm your water supply line is compatible.
• Żbokk Elettriku: A dedicated 120V GFCI outlet is required within 3 feet of the toilet's installation location.
• Pressjoni tal-Ilma: Minimum water pressure of 35 PSI is necessary for proper flushing and bidet operation.

4.2 Passi ta' Installazzjoni

1. Ipprepara ż-Żona: Turn off the water supply to the existing toilet and remove it. Clean the flange area thoroughly.
2. Position the Sealing Flange and Wax Ring: Place the provided sealing flange and wax ring over the drain opening.
3. Set the Toilet: Carefully lower the EPLO DP7 toilet onto the flange, aligning it with the bolts. Due to its weight (approximately 107.8 lbs), this may require two people.
4. Sikur it-Tojlit: Use the mounting accessory kit to firmly secure the toilet to the floor.
5. Qabbad il-Provvista tal-Ilma: Connect the 1/2-inch water supply line to the T-valve and then to the toilet's water inlet. Ensure all connections are tight to prevent leaks.
6. Qabbad l-Enerġija: Plug the toilet's power cord into the dedicated 120V GFCI outlet.
7. Funzjonijiet tat-test: Turn on the water supply and power. Allow the toilet to fill and perform initial self-tests. Test all flushing and bidet functions.

5. Istruzzjonijiet Operattivi

The EPLO DP7 Smart Toilet offers multiple convenient operating features.

5.1 Automatic Lid Open/Close

The lid automatically opens when a user approaches and closes after use. This feature can also be controlled via the remote control or by a foot kick sensor.

5.2 Funzjonijiet tal-Bidet

The hygienic stainless steel nozzle provides various wash options:

• Aħsel ta' wara: For posterior cleansing.
• Female Wash: A softer, wider spray for feminine hygiene.
• Moving Wash: The nozzle oscillates for a broader cleaning area.
• Warm Water Wash: Water temperature is adjustable for comfort.

The nozzle performs an auto-clean before and after each use and is movable for easy manual cleaning.

5.3 Heated Seat & Warm Dryer

• Sedil imsaħħan: The seat temperature is adjustable for comfort.
• Warm Dryer: After washing, a warm air dryer provides comfort. Air speed and temperature are adjustable.

5.4 Għażliet ta' Tlaħliħ

The DP7 offers multiple flushing methods:

• Laħlaħ bil-Kontroll mill-Bogħod: Use the provided remote to initiate a flush.
• Press Knob Flush: A knob on the side of the toilet allows for manual flushing.
• Foot Kick Flush: A sensor at the base allows for hands-free flushing by gently kicking the sensor.
• Tlaħliħ Awtomatiku Barra mis-Sedil: The toilet automatically flushes when the user stands up and moves away.

The toilet utilizes Siphonic Jet Flushing technology for efficient cleaning with 1.28 gallons per flush (GPF).

5.5 Dawl bil-lejl

An integrated night light guides you in the dark, enhancing safety and convenience during nighttime use.

5.6 Blackout Flushing

Fil-każ ta' qawwa outage, the built-in backup battery allows for flushing by pressing the knob on the side of the toilet.

6. Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your EPLO DP7 Smart Toilet.

6.1 Tindif ta' barra

Imsaħ l-uċuħ ta 'barra b'artab, damp cloth and mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads that could damage the finish.

6.2 Tindif taż-Żennuna

The nozzle performs an automatic self-cleaning cycle. For deeper cleaning, the nozzle is movable and can be gently wiped with a soft cloth and mild cleaner. Do not use excessive force or sharp objects.

6.3 Manutenzjoni tal-Filtru

Periodically check the water inlet filter for any debris or mineral buildup. If clogged, carefully remove and clean it under running water. Reinstall securely.

6.4 Ħażna fit-Tul

If the toilet will not be used for an extended period, turn off the water supply and unplug the unit. Drain any remaining water from the toilet bowl and bidet system to prevent freezing or stagnazzjon.

7 Issolvi l-problemi

Irreferi għal din it-taqsima għal kwistjonijiet komuni u s-soluzzjonijiet tagħhom.

• Toilet Not Flushing or Weak Flush:
  - Check water supply: Ensure the water supply valve is fully open.
  - Check water pressure: Insufficient water pressure (below 35 PSI) can cause weak flushing. Consult a plumber if your home's water pressure is consistently low.
  - Power supply: Ensure the toilet is properly plugged into a working GFCI outlet.
• Bidet Not Functioning:
  - Check water supply: Ensure water is flowing to the toilet.
  - Check power: Verify the toilet is powered on.
  - Nozzle obstruction: Inspect the nozzle for any blockages.
• Lid Not Opening/Closing Automatically:
  - Sensor obstruction: Ensure the sensor area is clean and unobstructed.
  - Power cycle: Unplug the toilet for 30 seconds and then plug it back in to reset the system.
• Heated Seat/Dryer Not Working:
  - Check power: Ensure the toilet is receiving power.
  - Settings: Verify that the heated seat and dryer functions are enabled and set to the desired temperature/speed via the remote control.
• LED Display Not Showing Temperature:
  - The LED display indicates real-time water/seat temperature. If it's not visible, ensure the toilet is powered on.

If the issue persists after attempting these solutions, please contact EPLO Customer Support.

8. Speċifikazzjonijiet

9. Informazzjoni dwar Garanzija

EPLO products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact EPLO Customer Support directly. Keep your proof of purchase for warranty claims.

10. Appoġġ għall-Klijent

For technical assistance, troubleshooting, or parts inquiries, please contact EPLO Customer Support. You can typically find contact information on the EPLO brand webis-sit jew permezz tal-pjattaforma tax-xiri tiegħek.

When contacting support, please have your product model (DP7) and purchase details ready.