Sharp Digital Alarm Clock SPC483 - Instruction Manual

Introduzzjoni

Grazzi tax-xiriasing the Sharp Digital Alarm Clock, Model SPC483. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this manual thoroughly before use to ensure proper function and to maximize your product experience.

Figura 1: Quddiem view of the Sharp Digital Alarm Clock SPC483, displaying the time 12:08 PM.

Informazzjoni dwar is-Sigurtà

• Tħallatx batteriji qodma u ġodda.
• Tħallatx batteriji alkalini, standard (karbonju-żingu), jew rikarikabbli (nikil-kadmju).
• Remove batteries if the clock will not be used for an extended period.
• Keep the clock away from extreme temperatures, direct sunlight, and moisture.
• Do not attempt to disassemble or modify the clock. This will void the warranty.

Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• Sharp Digital Alarm Clock (Model SPC483)
• Manwal ta 'Istruzzjoni (dan id-dokument)

Nota: 2 AAA batteries are required for operation and are not included.

Prodott Overview

The Sharp Digital Alarm Clock SPC483 features a large 1-inch LCD display, a tactile rubberized finish, and easy-to-use top button controls. It operates on batteries, offering portability and convenience.

Figura 2: Fuq view of the alarm clock showing the control buttons and their functions.

Buttuni tal-Kontroll:

• AL. TIME (Alarm Set): Użat biex tissettja l-ħin tal-allarm.
• TIME (Time Set): Użat biex tissettja l-ħin kurrenti.
• SNOOZE/BACKLIGHT: Activates the blue backlight for 5 seconds and functions as a snooze button during an alarm.
• HR (Hour Set): Adjusts the hour during time or alarm setting.
• MIN (Minute Set): Adjusts the minute during time or alarm setting.
• ON/OFF (Alarm On/Off): Slides to enable or disable the alarm function.

Setup

1. Installazzjoni tal-batterija

1. Sib l-għatu tal-kompartiment tal-batterija fuq wara tal-arloġġ.
2. Remove the cover by sliding it down or lifting it off.
3. Insert two (2) new AAA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Ibdel l-għatu tal-kompartiment tal-batterija.

2. Setting the Current Time

1. Agħfas u żomm il- ĦIN button until the hour display begins to flash.
2. Agħfas il- HR Agħfas il-buttuna ripetutament biex taġġusta s-siegħa. Osserva l-indikatur PM għall-issettjar korrett tal-AM/PM.
3. Agħfas il- MIN Agħfas il-buttuna ripetutament biex taġġusta l-minuti.
4. Ladarba l-ħin mixtieq ikun issettjat, agħfas il-buttuna ĦIN button again to confirm and exit time setting mode. The display will stop flashing.

Istruzzjonijiet Operattivi

1. Setting the Alarm Time

1. Agħfas u żomm il- AL. TIME button until the alarm hour display begins to flash.
2. Agħfas il- HR button repeatedly to adjust the alarm hour. Observe the PM indicator for correct AM/PM setting.
3. Agħfas il- MIN button repeatedly to adjust the alarm minutes.
4. Ladarba l-ħin tal-allarm mixtieq ikun issettjat, agħfas il-buttuna AL. TIME button again to confirm and exit alarm setting mode. The display will stop flashing.

2. Activating the Alarm

• Żerżaq il- ON/OFF switch on the top of the clock to the 'ON' position. A bell icon will appear on the display, indicating the alarm is active.
• Biex tiddiżattiva l-allarm, żżerżaq il- ON/OFF switch to the 'OFF' position. The bell icon will disappear.

3. Funzjoni Snooze u Dawl ta' Wara

• Meta jdoqq l-allarm, agħfas il-buttuna l-kbira SNOOZE/BACKLIGHT button on top of the clock to activate the snooze function. The alarm will pause for approximately 5 minutes before sounding again.
• Biex view the time in low light conditions, press the SNOOZE/BACKLIGHT button. The blue backlight will illuminate the display for approximately 5 seconds and then turn off automatically to conserve battery life.

Figura 3: Pressing the SNOOZE/BACKLIGHT button activates the blue backlight for temporary illumination.

Manutenzjoni

Tindif

To clean the clock, wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or internal components.

Sostituzzjoni tal-batterija

When the display becomes dim or the alarm function weakens, it is time to replace the batteries. Follow the battery installation steps outlined in the Setup section.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

Sharp products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Sharp websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.